Commit Graph
32 Commits
Author SHA1 Message Date
Jean-Pierre MartineauandClaude Opus 5.5 9538bfedce MeshTerm drives an SPI radio itself, without the bridge service
A LoRa chip on the host's own SPI bus (the uConsole AIO) is now a
transport like serial, BLE, and TCP: --spi, an SPI profile, or the
picker's row for /dev/spidev1.0. MeshTerm starts a software node as a
child process under whichever Python has openhop-core, talks to it over
a loopback port, and ends it on disconnect; the node also exits with its
parent, so the pins are free whenever MeshTerm is not running.

The node keeps identity, prefs, channels, and contacts under
~/.meshterm/radio/<spidev>/, and on first use copies the bridge's
identity, contacts, and radio settings so it stays the same node.
Board wiring lives in a profile's spi table; radio settings are the
node's own, edited on Device config. Closes #21.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
2026-09-24 01:48:32 -04:00
Jean-Pierre MartineauandClaude Opus 5 2dbae7af77 The splash slides the whole row, because the whole row is what gets cut
The device rows pinned their fixed lanes and slid only the hardware model
underneath them. The reasoning was borrowed from the Trophy case, where the
rank, date and score always fit and only the walk overflows -- there the lanes
really are the reader's place in a long list, and sliding them off would cost
the row its identity to read something the columns already told you.

This list inverts that. On a narrow terminal it is the device name and the
address that get cut, so pinning them pinned the truncation in place: the one
thing the arrow keys could not reach was the text somebody most wanted to
finish reading. A name is not a landmark when it is the thing being elided.

So no lane is pinned, and the row slides whole. That needed the scroll to be
asked for outright, because what normally turns it on is a row pinning a head
block, and none of these do any more -- `hscroll` travels from the picker
through the splash surface to the list, the same path `live` took.

The test that covered the old behaviour is rewritten rather than removed. It
was a fair test of a decision that has changed, and the argument for the new
one belongs where the old one was.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-21 03:46:15 -04:00
Jean-Pierre MartineauandClaude Opus 5 f9e9271b29 The connect screen keeps looking, instead of looking once
It scanned on the way in and never again, so a radio plugged in ten seconds
late was invisible until MeshTerm was restarted. The worst version of that is
the first run: the screen says no companion devices detected and offers a
network address typed by hand, or quitting. Going to fetch the cable is the
obvious thing to do and it was the one thing that did not work.

The three transports want three different answers, and the reason is cost.
Enumerating serial ports is a SetupAPI walk -- not free, but cheap enough to
repeat every couple of seconds off the event loop without anyone noticing, and
it covers the case this is really about. Bluetooth is a bounded listen, so
"keep scanning" there means keeping the radio listening for as long as the
splash is open, on the handhelds this program exists for, on a battery, on the
screen somebody leaves up while they walk away. It gets a window every fifteen
seconds instead, eight of them, and the count is ignored while the list is
still empty -- an empty splash is precisely where somebody is waiting, and
another listen is the cost of being useful. TCP is not scanned at all, because
it never was: a network companion does not advertise, and its rows are read
from the registry and the profiles, which change only when the reader changes
them.

Only a change redraws. A poll that finds the same ports says nothing, which
matters for somebody part-way through arrowing down the list: a redraw they did
not ask for, on a list that has not moved, is the screen shifting under their
hands for no reason. When it does redraw, `replace_items` keeps their place by
value rather than by index, so a device appearing above the highlight does not
carry the selection with it.

`select_startup` grew a `live` argument to make this possible -- work to do
while the list is on screen, handed a `redraw(items)` rather than the screen
itself, since a caller holding a screen could not repaint it anyway. It is
cancelled when the screen resolves, so nothing outlives the list it was
redrawing and no repaint lands on the PIN prompt or the smoke test that opens
over it.

Fixes: #13

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-21 03:26:13 -04:00
Jean-Pierre MartineauandClaude Opus 5 b1f21664ff The name is what the reader came to read, so the address is what gives
Capping the address lane stopped it eating the row, but left the old priority
in place underneath: DEVICE was still sized from whatever the address had
finished taking. Turn it around. The name is sized first, in full, and the
address takes what is left.

That is the right way round because of what each lane is for. A name is what
the reader recognises their own radio by; an address is a disambiguator, and a
disambiguator does its whole job from its last ten cells -- which is already
why the cut takes the front and keeps the tail. So the address shrinks to that
floor before the name gives up a single cell, and never reserves more than it
actually wants: a lone COM3 hands its slack to the name rather than sitting in
a ten-cell lane holding four.

The name still has to stop somewhere. A USB adapter's product string runs to
forty-odd characters, and a lane sized to that pushed everything after it off
the edge -- the row ended mid-port with HARDWARE not on screen at all. So
HARDWARE keeps its readable stub out of the budget, and past that the name
ellipsizes. Where it must, the address is handed back its full width instead
of being ellipsized alongside: the name is being cut whatever happens, and
spending two more of its cells leaves one cut in the row rather than two.

On a Mac the name now shows whole at 28 cells where it had six, and the 36-cell
UUID behind it draws as its last nine.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-19 00:56:34 -04:00
Jean-Pierre MartineauandClaude Opus 5 1933d725b0 The address lane stops eating the columns worth reading
On a Mac the splash's DEVICE column was squeezed to the width of its own
heading, and HARDWARE went with it.

The lane sized itself to the longest target with no cap, and `_name_width`
sizes DEVICE from whatever that leaves. On Windows and Linux the assumption
held -- a MAC is 17 cells, /dev/ttyUSB0 is 12 -- so nothing ever pressed on it.
macOS breaks it twice: CoreBluetooth reports no MAC at all but a per-machine
128-bit UUID, 36 cells of it, and even the ports run long (every Mac carries a
/dev/cu.Bluetooth-Incoming-Port, which is 31). One of those took 36 of the 58
cells a row has, leaving DEVICE six.

So the lane is capped and ellipsizes, which is what the name lane beside it has
always done. The cut takes the **front**: what tells two targets apart is their
tail -- usbmodem1101 from usbmodem1102, ttyUSB0 from ttyUSB1 -- while the head
they share is boilerplate, and cutting the back would draw two different ports
identically, which is the one thing a picker must never do. A CoreBluetooth
UUID reads the same from either end, so the rule that is right for ports costs
the platform that needed the cap nothing. That is also why this is not
`menus.fit_cells`, whose ellipsis keeps the head.

At 20 cells the cap is above every target the other platforms produce, so they
are untouched by it and the change shows up only where something was wrong.
DEVICE goes from 6 cells back to 18.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-19 00:45:45 -04:00
Jean-Pierre MartineauandClaude Fable 5.1 c9f5a71ce7 Every Python file names its licence with an SPDX identifier
Apache-2.0 does not require per-file headers, but a file lifted out of the tree carried no marking at all. One comment line, first (or right after a shebang), on every .py under meshterm/, tests/, packaging/ and scripts/, plus the extensionless SPI bridge; tests/test_spdx.py keeps a new file from landing without one.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
2026-09-13 13:09:18 -04:00
Jean-Pierre MartineauandClaude Opus 5 61dc9dc110 Every icon-led list measures its icon column, so no label starts a column early
The terminal draws some icons in one cell (↻ ⌨ 🗑 ✓ ✗ ⚠) and most emoji in two, so
a row written icon-plus-space started its words a column left of its siblings. The
fix kept landing one screen at a time. menus.align_icons now pads every icon in a
list out to the widest one, and menu_rows applies it itself, so a list built there
cannot misalign.

Hand-built lists are brought along: the courier outbox and entry actions, the
watchtower actions and rule popover, the record card's actions, the main menu's
Quit row and the device splash's action rows. The repeater admin's regression
test, dropped by a concurrent rewrite of its file, is restored.

tests/test_icon_alignment.py sweeps every gallery screen on both platforms and
fails, naming the rows and their start cells, when a list's icon-led rows start
their words in different cells.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-11 02:02:05 -04:00
Jean-Pierre MartineauandClaude Opus 5 398a184eed The splash says bye, and keeps the reader's place when a row goes
Three passes over what landed yesterday.

The hidden-count line stops standing in the list. With devices still
listed the footer already names ⇧H on every row, so the line was a row
of the box spent saying it twice; it stays only for a list hiding has
emptied, where there is no footer atom to read it off and "no
companion devices detected" would be a lie about a machine with a
radio plugged into it.

Hiding now leaves the highlight where the row was - the next device
down, or the one above at the end, never rolling round to the top - so
a run of adapters clears with a run of presses instead of the cursor
jumping back to the remembered default after each one.

And Esc says bye here rather than quit: the splash is the door, and
the reader leaving it has not started anything to quit out of.

One consequence, on the console: the splash border is 47 cells and the
sentence now sheds the hide key too when it must. Between the two
shortcuts the survivor is the way back - ⇧H only appears once
something is hidden, which is exactly when a reader needs to be told
how to undo it, and by then they have found h.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-09 01:45:19 -04:00
Jean-Pierre MartineauandClaude Opus 5 b2bf305a31 Hide the devices on the splash that are never the one you want
A machine with a debug probe, a programmer and a USB adapter soldered
into it shows all three on every start, in front of the one radio the
user actually came for. h drops the highlighted device from the list
and remembers it in the device registry; ⇧H brings every hidden one
back. Both keys are named in the footer only where they would act -
h on a device row, ⇧H only while something is hidden - which is the
rule Del remove already followed.

Hiding is a listing choice and nothing else: a hidden device is still
remembered, still resolvable by --port, and shows itself again the
moment it is connected to. A row that is simply gone would let the
list misrepresent the machine, so a muted line says how many are
hidden and which key returns them - and that line is also where ⇧H
survives on a console whose splash border is 47 cells.

The mechanics are shared rather than local: a non-filterable list can
declare bare-key shortcuts (a filtering one cannot - every letter
there belongs to the query) and name them per highlighted row, and a
chromeless splash whose hint outgrows its box now drops atoms in front
of Esc rather than being cut off at the end, where Esc is.

Two things the narrow console showed while this was being fitted: the
splash header was a hand-built string that wrapped at 53 columns, and
the DEVICE lane sized itself to the longest name - which for a USB
adapter is its forty-character product string, pushing HARDWARE off
the edge entirely. The header goes through column_header, and the name
lane now yields to keep HARDWARE on screen. What is left of a long
model string scrolls: ←→ read the highlighted row's tail to its end,
with the lanes in front of it pinned.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-09 01:26:06 -04:00
Jean-Pierre MartineauandClaude Opus 5 92d31a3191 Every file is spelled the way the formatter spells it
`ruff format .` across the repo: 153 files, no behaviour change. This is the
second gate CONTRIBUTING.md promises, and until now it reported 154 files needing
reformat — so a first contributor ran the command the guide told them to run and
could not tell their own diff from the background.

Landed on its own, with nothing else in it, because a whole-repo reformat is only
safe to skip past in blame if it is provably nothing but layout. It was checked
that way rather than assumed: every changed file was formatted in memory and
compared by full `ast.dump()`, and 152 of 153 come out structurally identical
(the one exception was a docstring opening on a quote character, fixed in the
commit before this one). The string and comment token streams were diffed
separately, so a quote flip or an edited comment could not hide inside a
re-layout — five quote-style normalisations and sixteen implicit-concatenation
joins, all value-identical, and one commented-out line gaining the space after
its `#`. `meshterm specimen` is byte-identical on both platforms, and the suite
is 1888 green, gallery gate and `test_theme16` included.

What actually changed, in order of how much of the diff it is: wrapped calls and
signatures rejoin onto one line where they fit inside the hundred columns; the
magic trailing comma expands what it is there to expand; complex slices gain
their spaces (`[len(noise) :]`); a few redundant parens go. The tables that are
laid out to be read were fenced in the previous commit and are untouched here.

The aligned trailing-comment column is gone from about ninety lanes that were not
fenced — including the `heat.*` ladder in `MESH_THEME`, which cannot be fenced
where it sits. Every comment stays on the entry it describes, so nothing there
reads wrong; it just no longer lines up.

Add this commit to `.git-blame-ignore-revs`, which follows immediately.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-07 01:07:19 -04:00
Jean-Pierre MartineauandClaude Opus 5 71b16ec7b7 The annotations, imports, and dead locals answer to ruff
`ruff check --fix` over the whole tree, ahead of putting the linter in CI:
1977 mechanical fixes, overwhelmingly `Optional[X]` → `X | None` (1186 in the
package alone) and the quoted annotations that `from __future__ import
annotations` already made unnecessary, plus import sorting and unused imports.
Nothing here changes behaviour — the suite is 1885 green before and after.

Four findings were real rather than stylistic and are fixed by hand: a dead
`cells` range in `MapCanvas`, a dead slot dict in the heat-ladder test, a
`ProgressScreen` task handle nobody read, and a tab loop binding a `label` it
never used. The two `F821`s were quoted forward references to names imported
inside their function bodies — now declared under `TYPE_CHECKING`, which keeps
`test_performance`'s local import (it guards the startup import graph) while
letting the linter resolve the name.

412 findings remain and are deliberately untouched: they need a decision about
the rule, not an edit to the code.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-06 17:26:12 -04:00
Jean-Pierre MartineauandClaude Opus 5 e0a681b293 Busy screens: stop the spinner starving the work it reports on
On the PicoCalc a repaint costs about 154ms, and these two loops waited 60ms
(the overlay) and 120ms (the splash) between them — rates hardcoded past
spinner_interval(), which every other animated wait in the app already sleeps
on. The animation asked for repaints faster than the console could finish them,
so it took the event loop from the device read it was covering for: the wait got
slower for being animated, and the spinner stuttered anyway. Both defer to the
platform now (0.5s there, 0.12s on the desktop).

Two calls were also blocking the loop outright, which stops the animation dead
however it is paced. Enumerating serial ports is a SetupAPI/sysfs walk — behind
the "Scanning for companion devices…" splash, and again on every poll of the
reconnect dialog — so both go to a thread. The UI itself cannot: prompt_toolkit
owns the loop for render and keys. Moving the blocking work off it is the same
fix from the other side.

Two tests: neither busy screen may carry a spin rate of its own, and the
spinner advances *during* an awaited read rather than only side of it.

Also drops the "· experimental" tag from the network-device row.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-25 02:12:26 -04:00
Jean-Pierre MartineauandClaude Opus 5 ed06492bd0 Splash: the wordmark states its own copyright, and blank is a space
The mark's art signs itself now, so no splash adds a line under it — the
picker, the smoke-test spinner, the PIN prompt, the failure notices, the
scan and the settings offer all drop the footnote they were passing, and
nothing draws the notice twice. The written About pages keep their {copyright}
colophon: that is a page of prose, not a screen with the mark on it.

Moebius spells an untouched cell as a NUL, which a DOS console draws blank and
Rich measures as nothing at all — so every one swallowed a column and slid the
rest of its row leftwards, eighteen of them on the worst line. They are spaces
in the file now, and the loader translates any that come back (with codepage
437's hard space) so re-exporting the art can't reintroduce the drift.

Those NULs were also the only reason git guessed the file was binary. With them
gone, .gitattributes has to say so outright, before core.autocrlf starts
rewriting CRLFs that are part of the canvas.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-25 01:15:46 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 f5880bfc20 Device picker: list configured serial profiles (soldered platform UARTs)
A soldered SoC UART like the Luckfox Lyra's /dev/ttyS1 is never enumerated by
pyserial's comports(), so a serial [profiles.*] entry pointing at one could only
ever be reached via `meshterm --port` on the command line -- it never surfaced in
the startup picker, which listed only scanned devices (and TCP profiles). Fold
configured serial profiles into the picker too, mirroring the existing TCP-profile
folding, de-duplicated by port so a port pyserial *does* enumerate keeps its richer
scanned row.

Also fix the liveness poll for the same ports: serial_port_present() now treats an
existing /dev character device as present (platform UARTs aren't in comports() but
their node persists exactly as long as the port does; a USB node vanishes on unplug,
so this never masks a real disconnect). Without it the watcher would falsely report
a soldered radio unplugged mid-session.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-31 02:02:33 -04:00
Jean-Pierre MartineauandClaude Opus 5 0a41303366 Lists: what stays overhead is the section you are in
Two things a grouped list has to keep in view while it scrolls, and neither one
was staying: the lane names that read every row, and the heading that says which
group a row belongs to.

The lanes come first. A column header means the same thing in every section, so
it is not a section landmark at all — it pins for the *whole* list, above any
heading, once it scrolls off (`Separator(pinned=True)`). It is drawn outside the
body slice, so it stays exactly one row: too wide for the terminal it ellipsizes
rather than wrapping and stealing a second reserved row from the content. And it
can now size itself — a Separator title may be a callable taking the render
width — so `column_header`/`Lane` lay each label over its own lane and hand back
the shorter form (DESCRIPTION → DESC) only for the lanes that actually overrun,
from the right, where the trailing lane is the only one with a cell to give.
`lane_header` is that header for `lane_row`'s lanes, shared by the two editors so
they head identical lanes identically.

The headings were the other half, and they were pinning the wrong row. Every
non-pinned separator was a candidate, and the rule takes the last one at or above
the scroll — so what pinned was whatever muted line sat lowest under the heading.
In the Trophy case that meant a discipline's *description* stuck to the top and
the heading itself never did; at the foot of any list, the blank spacer above
Back pinned a blank row. So heading-ness is explicit now (`Separator.heading`,
conferred by `section_heading`, which is why every hand-rolled `── … ──` in the
app — the main menu's categories, the chat picker's Channels/Direct, Trace path's
candidate and ranked lists — now goes through it, and why three lanes headers
that genuinely *are* their block's only landmark say so).

A landmark is also no longer one line but a block: a heading plus the separators
written immediately under it, before the section's first row. Prose written there
is the section's preamble — the Trophy case's "what this discipline scores" — and
it belongs overhead with the heading rather than scrolling away from the rows it
explains. The block hands its rows over one at a time as they leave, so the
heading pins while its description is still the top content row and the two pin
together once both are gone: what is overhead always continues seamlessly into
the body. It never takes more than half the viewport, giving rows up from the
end, so the row that says *which* section this is is the last one dropped.

The frame settles the scroll against however many rows come back rather than
assuming one, and re-asks after sliding the window at the bottom — a heading
among the dropped lines would otherwise vanish instead of pinning.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-07-29 04:13:14 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 4bce531465 Device picker: list configured TCP profiles in the enumerator
A [profiles.*] TCP entry in config.toml was reachable only via
`meshterm -p <alias>` — the interactive picker built its list from the
live scan plus TCP devices remembered in the DeviceStore, never from the
user's own config. So a hand-authored network companion stayed invisible
until after it had been connected to once.

Fold configured TCP profiles into the picker the same way remembered ones
are: _profile_tcp_devices() rebuilds each into a DiscoveredDevice carrying
its alias as the DEVICE-column name, deduped by stable_id so an endpoint
that's also scanned or remembered keeps its richer row. An unconfirmed
profile shows the muted "network companion" tag and turns "MeshCore
device" once its smoke test passes.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
2026-07-24 03:32:31 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 59b26ae616 Dialogs: float confirms/prompts over their backdrop, never replace the screen
Enforce the UX standard "modal popups over the pushed backdrop" across three
flows that were drawing a full-frame replacement instead of a floating popup:

- Trophy case: keep the record browser pushed as a static backdrop while its
  delete-record / delete-discipline / delete-all confirms float over it, and
  run any trace hand-off after popping.
- Device picker: pass the picker's rows through to the removal confirm so it
  floats over a redraw of the list (backdrop_items/backdrop_default on
  confirm_startup), with the row being removed left highlighted.
- Remote-admin password: add an opt-in floating flag to Ui.text so a mid-flow
  password prompt draws as a centered popup over a blank base instead of the
  full frame; apply it to repeater_admin and tx_optimize logins. Tool-entry
  text prompts (Trace/tx target fallbacks) stay full-frame.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-16 20:07:41 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 965783d276 Network (TCP) companions: connect, remember, and manage from the picker
Add TCP alongside serial and BLE as a first-class companion transport, end to
end: discovery/connection/selection learn a tcp: stable_id and host:port target,
--tcp and TCP config profiles reach a WiFi board or network proxy, and a network
companion -- which isn't discoverable -- is rebuilt into the picker from its
remembered endpoint.

Device picker gains the network-device affordances:
- "Add a network device" prompts for host:port, smoke-tests it, and remembers it.
  The row is marked "- experimental" in the cautionary hue.
- Delete on a network row opens a chromeless Cancel/Remove confirm (Cancel left,
  Remove right and default: Enter removes, Esc cancels), then DeviceStore.forget
  prunes it and re-draws the list. Serial/BLE rows stay inert.
- The "Del remove" footer atom now follows the highlight, surfacing on the box's
  bottom border only while the cursor sits on a deletable row; the box is sized
  to the fullest footer so it never widens mid-navigation.

Folds in the accompanying courier, channels, and config refinements built along
the way. Screens stay readable at 72 cols; full suite green (745 tests).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-14 02:38:11 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 a27b5951b7 Copyright: one canonical notice, hung under the logo
Consolidate the copyright into a single meshterm.copyright_notice() beside
__version__ (was defined twice, disagreeing on wording, holder, and year
span). Every startup splash draws from it, so it can never drift.

Place it immediately under the wordmark, right-justified to the logo edge, so
the two read as one signed block. Simplify the display logic: it now rides
every splash that shows the logo (picker, spinner, PIN, notices) rather than
being dropped after the first selection.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-14 02:07:53 -04:00
Jean-Pierre MartineauandClaude Fable 5 a23b12f6a4 Normalize UI copy: casing, headers, descriptions, backtracking
Enforce one voice across every screen: column and section headers are
UPPERCASE, menu items are Capitalized buttons, and short descriptions
drop their trailing period (with real ellipses instead of "...").

Tools gain a display `title` separate from their kebab-case CLI name,
so a menu item now reads exactly like the screen it opens ("Device
configuration" opens Device configuration) and result windows inherit
the same name. Every sub-screen backs out via a "Back" row below a
blank separator (the config editor was missing both; its Close is now
Back, spelling out the discard when changes are staged), while the main
menu and device picker keep "Quit". Panel and dialog titles now wear a
brighter tint of their border colour via new title.* theme styles.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-09 22:51:42 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 588ee67c3b Prompt for a Bluetooth PIN in the picker; bail cleanly in the CLI
When a companion needs pairing, the interactive picker now opens a centered PIN
popup (its own bordered box under the wordmark, matching the splash) and retries the
connection with the entered code — re-asking with a "rejected" note on a wrong PIN,
and returning to the device list on Esc. The masked field clears its stale error as
soon as the user types a fresh code.

The connect failure is now a distinct DeviceAuthenticationError (a DeviceCommandError
subclass), so the picker can catch "needs a PIN" specifically while the scripted CLI
still catches the base class, prints the remedy (pass --ble-pin), and bails without a
prompt — no interactivity for scripted runs. --ble-pin already feeds the first attempt.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 19:39:07 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 77390860da Handle PIN-protected Bluetooth companions gracefully
A BLE companion that requires pairing accepts the link-layer connection but rejects
the GATT subscribe with "Insufficient Authentication", which bleak raised as a bare
BleakGATTProtocolError — escaping connect() as an unhandled traceback.

Translate that (and related "Insufficient Encryption"/"not paired" rejections) into
a clean DeviceCommandError that names the fix: pass --ble-pin, and pair once in the
OS Bluetooth settings on Windows. It's classified as its own actionable case, never
as a dropped link, so the session offers a PIN rather than a pointless reconnect.

The startup probe now lets this actionable error through instead of collapsing every
failure to a bare "didn't answer", so the picker shows the real remedy in the splash.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 19:26:31 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 d4fa056526 Identify companion hardware by its firmware model
Query MeshCore's device-info frame (send_device_query) on connect to learn the
board's own model string (e.g. "Seeed Tracker T1000-E") — the only reliable source,
since BLE companions advertise no manufacturer data, use randomized addresses with
no IEEE OUI, and expose no GATT Device Information Service.

The probe folds the model into the identity dict, so it's captured during the
connection that already happens, then remembered in the device store (preserved
across reconnects like the node name). The device list and splash picker rename
their "Vendor" column to "Hardware": it shows the firmware model for confirmed
devices and falls back to the USB vendor name for merely-attached serial ports.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 19:17:43 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 6d51b4e2ab Add a TYPE column and name known devices on the picker
Reworks the startup device picker so it reads honestly at a glance:

- VENDOR is now just the hardware maker. A BLE advert rarely carries one
  (confirmed against real hardware: the companion advertises no
  manufacturer_data), so it stays blank instead of mislabelling the
  transport "Bluetooth" as a vendor.
- A new TYPE column marks the transport with an icon: a plug emoji for
  wired serial, and the Bjarkan rune the Bluetooth logo is drawn from,
  rendered white on Bluetooth blue and flanked by half-block slivers so
  it reads as a slim rounded badge.
- Every confirmed companion (not just the most-recent one) is shown by
  the mesh node name learned at connect time, so a known COM11 reads as
  its node name rather than the OS's generic "USB Serial Device".
- Confirmed companions sort to the top, most-recently-used first, and
  wear their name in white so they stand out from merely-detected ports.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 18:59:54 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 7850587e2a Add Bluetooth LE companion support alongside serial
Companions can now be reached over Bluetooth as well as USB. Rather than
a parallel BLE path, this generalizes the existing serial abstractions so
a device is identified by a transport (serial | ble) plus a target (COM
port or Bluetooth address); every feature rides the same Device interface
and works over either link unchanged.

- discovery: DiscoveredDevice gains transport/address/name and
  transport-aware stable_id/label/confidence/target; discover_ble_devices
  scans for MeshCore* adverts via bleak, discover_all merges both.
- connection: MeshCoreDevice opens create_ble vs create_serial by
  transport; new link_present() liveness (OS port enumeration for serial,
  the BLE client's is_connected flag for Bluetooth); is_connection_lost
  recognizes Bleak errors and BLE transport callbacks; probe_device is the
  transport-aware smoke test.
- disconnect: the session watcher polls transport-neutral link_alive(), so
  a dropped BLE link raises the same reconnect dialog and auto-resume as an
  unplugged cable; reconnect rebuilds the same endpoint by address.
- selection/context/store/profiles: --ble address, remembered BLE default,
  and BLE device profiles all resolve to the right transport.
- UI/CLI: startup picker scans both transports behind a spinner and tags
  Bluetooth companions; `devices` lists them (--no-ble to skip); global
  --ble/--ble-pin flags; README and example config updated.

Validated on hardware: discovery, connect, reconnect, and channel
messaging (send + receive) over BLE.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 18:44:39 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 101b48bc71 Adopt the probed device and polish the startup splash
Rework the startup device picker into a self-contained splash flow:

- probe_meshcore (renamed from smoke_test_meshcore) now leaves the confirmed
  connection open and returns it, so AppContext.adopt_device reuses that live
  radio instead of reopening (many boards reset on each serial open). Restore
  the library's normal per-command timeout once the handshake succeeds.
- Extract the Braille animation into a reusable tui.Spinner; BusyScreen now
  delegates to it.
- Pin the wordmark to a fixed vertical anchor so it never shifts as the box
  swaps between the device list, spinner, and messages.
- Esc or a trailing Quit row leaves the splash and exits the program.
- Show the copyright only on the opening splash; retire it once a device is
  chosen, even across a failed smoke test and re-pick.
- Disable prompt_toolkit's loop exception handler and route asyncio (and the
  awaited spinner ticker) errors to the file log, so a stray background-task
  error can't dump a traceback over the full-screen UI.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-08 18:09:27 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 b692cce463 Confirm devices by smoke test on the startup splash
Reserve the "MeshCore device" tag for hardware we have actually talked to,
rather than guessing from the USB vendor ID:

- DeviceStore now keeps a registry of every confirmed device (keyed by
  stable serial id), remembered forever, migrating the old single-record
  file transparently.
- Selecting a device on the splash runs an immediate smoke test
  (smoke_test_meshcore): a genuine companion is remembered and confirmed;
  anything else re-prompts with a message to choose another. The probe uses
  a short handshake window so a non-MeshCore port is rejected cleanly in a
  few seconds instead of blocking on meshcore's full default timeout.
- The probe renders in place on the chromeless splash via a new BusyScreen
  (animated Braille spinner) driven by session.busy_startup, so the wordmark
  and box stay put instead of a separate progress dialog.
- Silence the meshcore library's console logging (its import calls
  logging.basicConfig, which printed "INFO:meshcore:..." over the TUI):
  route it to the JSON-lines file log with a NullHandler guard on root.
- The devices tool now marks confirmed devices and stops asserting "LoRa"
  before a device is proven.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-08 17:52:30 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 e52e5daf87 Draw the splash wordmark from a colored logo.ansi file
Replace the baked-in block-glyph constant with a pre-coloured logo.ansi read
fresh on every render, so the wordmark can be re-styled by editing that file
alone. It uses the ANSI Shadow face with green letters (#4ade80) and a
single-line dark-green bevel (#166534).

The banner path in compose_startup now centers already-coloured ANSI rows (as
one left-aligned block) rather than force-styling them a single colour, and a
new muted, centered footnote sits below the box — the splash uses it for a
"© <year> Homestead" copyright notice. The plain-text source is kept as
logo.txt for regenerating the art, and the old ansilogo.txt is removed.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-08 17:32:38 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 b66d1f7626 Redraw the startup device picker as a centered splash
The companion-device picker no longer borrows the in-menu frame. It is now a
chromeless splash: the MeshTerm wordmark, centered, above a box sized to the
device list rather than stretched across the terminal, with no header/footer
status bars.

A new `chrome` flag on Screen routes a base screen to `frame.compose_startup`,
which draws the banner and centers a content-sized panel. The device rows are
laid out in aligned columns (name / port / vendor / tag) under a muted header,
and type-to-filter is disabled (new `filterable` flag on SelectScreen) since the
list is short and fixed. The no-devices case gets the same splash treatment.

The wordmark lives in a code constant (meshterm/ui/logo.py, generated from
ansilogo.txt) so it survives installation regardless of packaged data files.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 23:19:47 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 61f4eff8dc Drop the Skip row from the device picker
The picker now lists only real discovered devices. Cancelling with Esc
still falls back to --mock / configure-later, so no behavior is lost.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 21:13:57 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 0c0880b37d Pick the companion device at startup only
The devices tool doubled as a mid-session device switcher: its menu
prompt re-ran the picker and reassigned the active device. Drop that so
selection is a startup-only concern (or --port on the CLI); the tool is
now a read-only inventory in both the menu and CLI.

With the re-pick gone, startup is the sole caller of prompt_device, so
its cancel_label parameter (added only to swap in a "Back" label) is
removed and the "Skip…" label inlined.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 20:36:51 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 2ec18138a7 Rename project from MeshTools to MeshTerm
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 19:40:49 -04:00