Commit Graph
8 Commits
Author SHA1 Message Date
Jean-Pierre MartineauandClaude Opus 5 a7d201f4da A setting you use on a node's command line becomes a row on that node's page
Third-party builds carry knobs the catalog has never heard of -- EasySkyMesh's
radio.rxps and reboot.interval among them -- and MeshTerm cannot know which
build a repeater is running without asking it. Asking is the whole problem:
every question is one paced round trip, so probing for a fork's keys would
spend a sweep on every node to benefit a few, and listing them outright would
leave dead n/a rows on everyone else's page.

So nothing is probed speculatively and the catalog does not grow. The command
line is already the only place those settings can be reached, so it is now
also where they are found: a get/set the reader ran, which this node answered,
earns a row on this node's page under Extra. The round trip was one the reader
was spending anyway, and no other node's page changes.

The two verbs are not equal evidence, which the firmware settles. handleSetCmd
compares each key with its trailing space -- "radio " -- so a longer key can
never land in a shorter one's branch, and an unknown one answers "unknown
config:". handleGetCmd compares a bare prefix, so stock firmware answers
"get radio.rxps" out of the get radio branch with a perfectly plausible
910.525,62.5,7,5. A catalog row survives that because its typing rejects it; a
discovered key has no typing, so a read is trusted only when nothing shadows
the key, or when the reply differs from what the shadow last said.

A discovered row's whole claim to exist is that the node answered it, so when
it stops answering the row goes rather than earning the n/a that only a
catalog key can -- which is what tidies up after a board swap onto a reused
identity. Del forgets one without waiting for a read, and asking the key again
brings it back. Its values are fitted to the lane the catalog's rows already
need, since the value lane is one width for the whole page.

prv.key is never stored, whichever way it was asked. The firmware answers it on
the serial console only, and a reply that reached us anyway must not be the
first place a repeater's private key lands in a file.

Two things fall out: get tx at the command line no longer leaves the TX power
row showing last week's value, since catalog keys now fold into the cache the
same way, and a discovered key completes at the prompt where it was learned.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-17 21:29:26 -04:00
Jean-Pierre MartineauandClaude Fable 5.1 c9f5a71ce7 Every Python file names its licence with an SPDX identifier
Apache-2.0 does not require per-file headers, but a file lifted out of the tree carried no marking at all. One comment line, first (or right after a shebang), on every .py under meshterm/, tests/, packaging/ and scripts/, plus the extensionless SPI bridge; tests/test_spdx.py keeps a new file from landing without one.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
2026-09-13 13:09:18 -04:00
Jean-Pierre MartineauandClaude Opus 5 e24e41178a The delay settings round to one decimal, on the repeater admin and device config
TX delay, direct TX delay and RX delay show, stage and send at one place instead
of two. Device config's RX delay had no rounding at all, so SettingSpec gains
the same decimals field the remote catalog carries, applied on parse and display.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-12 01:19:30 -04:00
Jean-Pierre MartineauandClaude Opus 5 74eabff25f A repeater setting its firmware lacks reads n/a, not ?
v1.15 matches get keys by prefix, so a key it lacks falls into a shorter
sibling's branch: get radio.fem.rxgain answers with the get radio line, and
gps on a board without its receiver answers "Can't find GPS". Neither is an
error string and neither parses, and an unparseable reply left the cache
alone, so those rows stayed on ?, which says never asked. Any reply that
can't be the setting's value now marks it n/a; only no reply keeps ?.

The fold itself rode along in 564ac0e; this adds the regression test, the
catalog's note on prefix-shadowed replies, and reflows a docstring line.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-11 03:42:43 -04:00
Jean-Pierre MartineauandClaude Opus 5 79efc4b0e0 Repeater admin speaks the firmware's own CLI, every setting of it
The catalog was written from convention, and the firmware disagreed: the delays
are floats (0.5 showed as 0 and typing it back was refused), bw/sf/cr are not
keys at all (the radio is one `get radio` / `set radio f,bw,sf,cr`), the guest
password is readable, and path.hash.mode and twenty-odd others were missing.
It is now transcribed from CommonCLI.cpp, with a test pinning the key list.

Read settings asks each question once and leaves every row answered: a value,
`empty`, or `n/a` where the node's firmware lacks the setting; reads that got
no reply are listed. ^R (F3 Read) re-reads the highlighted row alone. The value
lane drops its age stamp. Delays round to two places.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-11 01:49:51 -04:00
Jean-Pierre MartineauandClaude Opus 5 92d31a3191 Every file is spelled the way the formatter spells it
`ruff format .` across the repo: 153 files, no behaviour change. This is the
second gate CONTRIBUTING.md promises, and until now it reported 154 files needing
reformat — so a first contributor ran the command the guide told them to run and
could not tell their own diff from the background.

Landed on its own, with nothing else in it, because a whole-repo reformat is only
safe to skip past in blame if it is provably nothing but layout. It was checked
that way rather than assumed: every changed file was formatted in memory and
compared by full `ast.dump()`, and 152 of 153 come out structurally identical
(the one exception was a docstring opening on a quote character, fixed in the
commit before this one). The string and comment token streams were diffed
separately, so a quote flip or an edited comment could not hide inside a
re-layout — five quote-style normalisations and sixteen implicit-concatenation
joins, all value-identical, and one commented-out line gaining the space after
its `#`. `meshterm specimen` is byte-identical on both platforms, and the suite
is 1888 green, gallery gate and `test_theme16` included.

What actually changed, in order of how much of the diff it is: wrapped calls and
signatures rejoin onto one line where they fit inside the hundred columns; the
magic trailing comma expands what it is there to expand; complex slices gain
their spaces (`[len(noise) :]`); a few redundant parens go. The tables that are
laid out to be read were fenced in the previous commit and are untouched here.

The aligned trailing-comment column is gone from about ninety lanes that were not
fenced — including the `heat.*` ladder in `MESH_THEME`, which cannot be fenced
where it sits. Every comment stays on the entry it describes, so nothing there
reads wrong; it just no longer lines up.

Add this commit to `.git-blame-ignore-revs`, which follows immediately.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-07 01:07:19 -04:00
Jean-Pierre MartineauandClaude Opus 5 71b16ec7b7 The annotations, imports, and dead locals answer to ruff
`ruff check --fix` over the whole tree, ahead of putting the linter in CI:
1977 mechanical fixes, overwhelmingly `Optional[X]` → `X | None` (1186 in the
package alone) and the quoted annotations that `from __future__ import
annotations` already made unnecessary, plus import sorting and unused imports.
Nothing here changes behaviour — the suite is 1885 green before and after.

Four findings were real rather than stylistic and are fixed by hand: a dead
`cells` range in `MapCanvas`, a dead slot dict in the heat-ladder test, a
`ProgressScreen` task handle nobody read, and a tab loop binding a `label` it
never used. The two `F821`s were quoted forward references to names imported
inside their function bodies — now declared under `TYPE_CHECKING`, which keeps
`test_performance`'s local import (it guards the startup import graph) while
letting the linter resolve the name.

412 findings remain and are deliberately untouched: they need a decision about
the rule, not an edit to the code.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-09-06 17:26:12 -04:00
Jean-Pierre MartineauandClaude Fable 5 aef80d18bb Repeater admin: set up remote nodes over the mesh
A new Device management entry for administering repeaters and room
servers. The shared credentialed-first picker (extracted from TX
optimize) chooses the node, login runs on remembered passwords with a
one-time prompt otherwise (forgotten on rejection), and the editor
lands in the local device-configuration screen's exact lanes — but
speaking the node's text CLI through a new public
Device.send_remote_command, which brings the repeater-only knobs the
local editor never had: TX delay, Direct TX delay, RX delay, airtime
factor, advert intervals, flood max, repeat, guest password.

Reads cost one paced mesh round trip each, so the editor never
bulk-reads on open: values show what the last read said, age-stamped,
from a new per-node remote.json cache; Read settings refreshes them
under an abortable progress dialog and Apply sends the staged sets
the same way, folding confirmed values back into the cache and
keeping refused ones staged. Advert, clock sync, password change, and
reboot run as confirmed popups.

The Command line is a readline-style screen onto the node's raw CLI:
per-node history persisted across sessions (↑↓ recall, adjacent-dupe
suppression, capped), Tab completion over the known verbs plus every
catalog get/set spelling with ghost-text preview, one command in
flight at a time. The simulator grows a full repeater CLI so all of
it drives against --mock, and a scripted one-shot
(repeater-admin <node> <command…>) covers automation.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-11 04:14:16 -04:00