Four trace-feature upgrades, all UX-preserving:
- Stored traces recover their path-hash width from the (uniform) hop
hashes at rehydration, so a target's previous route renders short
hashes instead of the device's full 64-char public key.
- The trace screen's verbs are selectable action rows now — Trace,
Path width, Compose path, Explore paths. The cursor opens on Trace so
plain Enter still just traces; p/x/w hotkeys stay on their rows, and
the cursor only pins the view while it's actually being moved, so
PgUp/PgDn still read a long trace log freely.
- A floating path-width dialog picks the 1/2/4/8-byte hop addressing
(each row previews the target key with the addressed slice lit, the
device's routing width marked). Changing it re-renders a standing
forced path — hops widened back through their canonical hashes — and
shapes every spec composed or explored afterwards.
- The composer's new ⇄ row toggles symmetric (return mirrors the
outbound, the current behaviour) against asymmetric, where the whole
walk is composed by hand — target routed *through*, outbound
repeaters reusable, only the landing back on us implicit. Toggling
materializes the mirror into editable hops (or regenerates it from
what precedes the target), so the wire route never changes under the
toggle; the planned-route preview dims only palindromic return legs.
Also: the target now carries its hash in the composer preview like
every other node, and the composer's footer hint reads briefer.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The trace protocol has no separate return-path field, so a forced
path (from the composer or an adopted scenario) has to spell out the
whole boomerang itself: outbound hops, the target, then those hops
mirrored back. We were only sending the outbound half — repeaters
never saw the return leg, so a forced multi-hop trace couldn't rely
on the destination reflecting it.
render_forced_spec() in topology.py is now the one place that builds
a forced-path spec; PathScenario.spec() and the composer's _spec()
both call it. The composer's live preview already showed the mirrored
return dimmed alongside the outbound hops - that display code stays,
but the trace screen's planned-route preview now splits the *actual*
wire spec at its midpoint instead of assuming it was outbound-only,
and the composer's reopen-with-current-path reseeding drops the whole
return leg instead of just the spec's last token.
Also normalized node-hash display in the composer to the spec's
path-hash width (matching the planned/completed route views) instead
of a hardcoded 6-hex-digit slice.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Repeaters penalize (and can blacklist) nodes that burst traffic, so
every trace-transmitting surface now sends exactly one transmission
per human action: Enter on the live screen runs a single trace (the
screen still aggregates the session's medians), the scenario probe
measures each candidate path once, and the CLI drops --samples to
become a true one-shot. trace_runner.measure and the s-key sample
cycle go with it.
Also de-pollute the target picker's "Recently traced" section: the
repository now returns a short recency-ordered list instead of the
ever-growing all-time tally, and stored hex prefixes fold back to
their contact names so a node shows once.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The topology graph gains its fourth evidence source — the only one not
derived from our own reception. A repeater we hold admin rights on
reports its neighbour table (who it hears directly, at what SNR) when
asked over the mesh, revealing links and whole nodes our radio has
never received anything from: exactly the second vantage point the
composer runs dry without, two hops out.
Probed live against YUL-Cartierville (v1.15.0) through the Waymarker
before building: firmware answers the binary NEIGHBOURS request but
silently ignores guests, so the flow is login-first, tx-optimize style
(stored password, one-time prompt, forget on rejection). An empty table
is a normal answer — the gateway's own table was empty during the probe
(confirmed via its text CLI: '-none-') — so the UI says "ask again
later" instead of erroring.
Standing on a fetchable repeater, the composer shows a "fetch
neighbours" row with the suggestions it extends; the fetch runs under
the abortable spinner dialog, persists as a runs-row-owned snapshot
(schema v8, neighbour_reports), and the composer reopens mid-thought
with the same hops and refreshed suggestions tagged N. Refetching
supersedes the old snapshot per (repeater, neighbour) pair rather than
inflating the link's sample count: a table is current state, not an
event stream.
Verified end-to-end on hardware via MeshCoreDevice over BLE (login +
fetch + clean empty-table return) and in the mock (guest refusal,
discovery of a never-heard node, composer render + hand-off). 441
tests pass; the real database migrated v7 -> v8 cleanly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Everything we receive carries a fragment of the mesh's shape: successful
traces crossed every link in their path (out and back — the reply retraces
the reverse path, so links read both ways), each contact's out_path is a
route the firmware distilled from received floods, and RX-logged packets
report the relay chain they rode in on. A new topology service folds those
into one undirected evidence graph (schema v7 persists packet paths).
The trace screen stops auto-starting on target pick. Enter runs a burst
under a floating tracing dialog (spinner chip, live progress, Abort); "p"
opens a hop-by-hop path composer whose suggestions are the tail's observed
neighbours, strongest link first, with raw hex entry for unseen nodes; "x"
browses ranked path scenarios (device route, direct, best observed
alternatives) and can probe them all — a measured burst per candidate,
recorded as path_candidates rows, reliability-first ranking, winner offered
for adoption.
Composed specs are outbound-only, always ending at the target's hash: the
stored data shows the firmware auto-replies along the reversed path, and
user-composed "there and back" loops (3d,f2,3d) never succeeded. Specs
collapse to a uniform per-hop width the narrowest known hash can honour.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The six-prompt chain (path, samples, min, max, step, apply-up-front)
collapses to one: pick the path, and the live sweep screen takes it
from there. Levels land in an SNR bar chart as they are measured,
ascending by power with the current best starred, while the optimizer
announces its phase — coarse sweep, refining around the leader,
verifying — through a new on_phase callback. Reliability and trace
counts sit beside every bar, and a level nothing got through at reads
as an explicit no-reply row.
The apply decision moves to where it belongs: after the sweep, a
floating dialog offers the winner against the node's original power
(Cancel left, Apply right, Enter commits), and `a` re-offers it if
first declined. The sweep itself runs with apply off, so Esc at any
point stops the search and the optimizer's unwind restores the
original transmit power.
The sweep persists under one runs row (levels and traces alike), the
scripted CLI keeps its full flag set, chart, and --apply semantics,
and the tool moves in with Trace under Diagnostics.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Five features leave the menu and CLI: the heard-nodes review, the
baseline-regression checker, the offline link-budget calculator, the
route-stability graph, and the run-history browser — along with their
services (link_quality, link_budget, route_stability), the pyvis route
renderer, and the pyvis/networkx dependencies.
The data layer is untouched where it still earns its keep: passive
monitoring keeps recording every overheard packet (the header counters,
Nodes, and Map read it, and `meshterm monitor` still captures a bounded
window from the CLI), run logging keeps writing `runs` rows, and trace
history stays queryable for the trace tools. Only the route-map-only
`all_traces` query goes.
Also fixes a latent tie-break flake in the nodes sort: ages are now
measured from one clock snapshot, so identical last-seen stamps really
tie and keep their A→Z order in both directions.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The on/off switch never made sense for a pure listener: recording is
now unconditional, so the toggle submenu, the persisted preference
(MonitorStore/monitor.json), and the header's ON/OFF framing are gone.
The monitor registers its hub subscription at startup — a device-free
step that cannot fail — and its run row opens lazily on the first
observation, so recording follows the hub wherever it opens (eagerly,
or deferred by connect_on_start) and silent sessions leave no empty
runs. The menu entry is now just the read side, "Heard nodes", and the
header shows live heard counters instead of a switch state.
meshterm monitor on the CLI drops --on/--off for a bounded foreground
capture (--seconds N, 0 = until Ctrl-C, mirroring chat listen): it
tails each overheard packet live and summarizes the window's heard
nodes when it ends, while persisting history exactly like a session.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A direct message was transmitted once and marked failed the moment its
single delivery-ack window lapsed, leaving Ctrl-R as the only recourse.
Now the send path re-sends an unacknowledged message automatically before
giving up, matching the mesh convention of a few tries.
_deliver_direct loops send_direct_message until an ack lands or the budget
is spent; both the initial send and the manual Ctrl-R resend route through
it. Each attempt already blocks a full ack window before the next, so the
retries are spaced by that window rather than hammering the radio, and a
hard send rejection propagates without retry.
The budget is the new direct_message_soft_retries setting: retries + 1
tries, clamped to 0..2 so a message is never re-broadcast more than twice
(0 = one shot, default 2 = up to three tries).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>