Commit Graph
16 Commits
Author SHA1 Message Date
Jean-Pierre MartineauandClaude Opus 4.8 59b26ae616 Dialogs: float confirms/prompts over their backdrop, never replace the screen
Enforce the UX standard "modal popups over the pushed backdrop" across three
flows that were drawing a full-frame replacement instead of a floating popup:

- Trophy case: keep the record browser pushed as a static backdrop while its
  delete-record / delete-discipline / delete-all confirms float over it, and
  run any trace hand-off after popping.
- Device picker: pass the picker's rows through to the removal confirm so it
  floats over a redraw of the list (backdrop_items/backdrop_default on
  confirm_startup), with the row being removed left highlighted.
- Remote-admin password: add an opt-in floating flag to Ui.text so a mid-flow
  password prompt draws as a centered popup over a blank base instead of the
  full frame; apply it to repeater_admin and tx_optimize logins. Tool-entry
  text prompts (Trace/tx target fallbacks) stay full-frame.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-16 20:07:41 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 965783d276 Network (TCP) companions: connect, remember, and manage from the picker
Add TCP alongside serial and BLE as a first-class companion transport, end to
end: discovery/connection/selection learn a tcp: stable_id and host:port target,
--tcp and TCP config profiles reach a WiFi board or network proxy, and a network
companion -- which isn't discoverable -- is rebuilt into the picker from its
remembered endpoint.

Device picker gains the network-device affordances:
- "Add a network device" prompts for host:port, smoke-tests it, and remembers it.
  The row is marked "- experimental" in the cautionary hue.
- Delete on a network row opens a chromeless Cancel/Remove confirm (Cancel left,
  Remove right and default: Enter removes, Esc cancels), then DeviceStore.forget
  prunes it and re-draws the list. Serial/BLE rows stay inert.
- The "Del remove" footer atom now follows the highlight, surfacing on the box's
  bottom border only while the cursor sits on a deletable row; the box is sized
  to the fullest footer so it never widens mid-navigation.

Folds in the accompanying courier, channels, and config refinements built along
the way. Screens stay readable at 72 cols; full suite green (745 tests).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-14 02:38:11 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 a27b5951b7 Copyright: one canonical notice, hung under the logo
Consolidate the copyright into a single meshterm.copyright_notice() beside
__version__ (was defined twice, disagreeing on wording, holder, and year
span). Every startup splash draws from it, so it can never drift.

Place it immediately under the wordmark, right-justified to the logo edge, so
the two read as one signed block. Simplify the display logic: it now rides
every splash that shows the logo (picker, spinner, PIN, notices) rather than
being dropped after the first selection.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-14 02:07:53 -04:00
Jean-Pierre MartineauandClaude Fable 5 a23b12f6a4 Normalize UI copy: casing, headers, descriptions, backtracking
Enforce one voice across every screen: column and section headers are
UPPERCASE, menu items are Capitalized buttons, and short descriptions
drop their trailing period (with real ellipses instead of "...").

Tools gain a display `title` separate from their kebab-case CLI name,
so a menu item now reads exactly like the screen it opens ("Device
configuration" opens Device configuration) and result windows inherit
the same name. Every sub-screen backs out via a "Back" row below a
blank separator (the config editor was missing both; its Close is now
Back, spelling out the discard when changes are staged), while the main
menu and device picker keep "Quit". Panel and dialog titles now wear a
brighter tint of their border colour via new title.* theme styles.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-09 22:51:42 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 588ee67c3b Prompt for a Bluetooth PIN in the picker; bail cleanly in the CLI
When a companion needs pairing, the interactive picker now opens a centered PIN
popup (its own bordered box under the wordmark, matching the splash) and retries the
connection with the entered code — re-asking with a "rejected" note on a wrong PIN,
and returning to the device list on Esc. The masked field clears its stale error as
soon as the user types a fresh code.

The connect failure is now a distinct DeviceAuthenticationError (a DeviceCommandError
subclass), so the picker can catch "needs a PIN" specifically while the scripted CLI
still catches the base class, prints the remedy (pass --ble-pin), and bails without a
prompt — no interactivity for scripted runs. --ble-pin already feeds the first attempt.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 19:39:07 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 77390860da Handle PIN-protected Bluetooth companions gracefully
A BLE companion that requires pairing accepts the link-layer connection but rejects
the GATT subscribe with "Insufficient Authentication", which bleak raised as a bare
BleakGATTProtocolError — escaping connect() as an unhandled traceback.

Translate that (and related "Insufficient Encryption"/"not paired" rejections) into
a clean DeviceCommandError that names the fix: pass --ble-pin, and pair once in the
OS Bluetooth settings on Windows. It's classified as its own actionable case, never
as a dropped link, so the session offers a PIN rather than a pointless reconnect.

The startup probe now lets this actionable error through instead of collapsing every
failure to a bare "didn't answer", so the picker shows the real remedy in the splash.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 19:26:31 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 d4fa056526 Identify companion hardware by its firmware model
Query MeshCore's device-info frame (send_device_query) on connect to learn the
board's own model string (e.g. "Seeed Tracker T1000-E") — the only reliable source,
since BLE companions advertise no manufacturer data, use randomized addresses with
no IEEE OUI, and expose no GATT Device Information Service.

The probe folds the model into the identity dict, so it's captured during the
connection that already happens, then remembered in the device store (preserved
across reconnects like the node name). The device list and splash picker rename
their "Vendor" column to "Hardware": it shows the firmware model for confirmed
devices and falls back to the USB vendor name for merely-attached serial ports.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 19:17:43 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 6d51b4e2ab Add a TYPE column and name known devices on the picker
Reworks the startup device picker so it reads honestly at a glance:

- VENDOR is now just the hardware maker. A BLE advert rarely carries one
  (confirmed against real hardware: the companion advertises no
  manufacturer_data), so it stays blank instead of mislabelling the
  transport "Bluetooth" as a vendor.
- A new TYPE column marks the transport with an icon: a plug emoji for
  wired serial, and the Bjarkan rune the Bluetooth logo is drawn from,
  rendered white on Bluetooth blue and flanked by half-block slivers so
  it reads as a slim rounded badge.
- Every confirmed companion (not just the most-recent one) is shown by
  the mesh node name learned at connect time, so a known COM11 reads as
  its node name rather than the OS's generic "USB Serial Device".
- Confirmed companions sort to the top, most-recently-used first, and
  wear their name in white so they stand out from merely-detected ports.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 18:59:54 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 7850587e2a Add Bluetooth LE companion support alongside serial
Companions can now be reached over Bluetooth as well as USB. Rather than
a parallel BLE path, this generalizes the existing serial abstractions so
a device is identified by a transport (serial | ble) plus a target (COM
port or Bluetooth address); every feature rides the same Device interface
and works over either link unchanged.

- discovery: DiscoveredDevice gains transport/address/name and
  transport-aware stable_id/label/confidence/target; discover_ble_devices
  scans for MeshCore* adverts via bleak, discover_all merges both.
- connection: MeshCoreDevice opens create_ble vs create_serial by
  transport; new link_present() liveness (OS port enumeration for serial,
  the BLE client's is_connected flag for Bluetooth); is_connection_lost
  recognizes Bleak errors and BLE transport callbacks; probe_device is the
  transport-aware smoke test.
- disconnect: the session watcher polls transport-neutral link_alive(), so
  a dropped BLE link raises the same reconnect dialog and auto-resume as an
  unplugged cable; reconnect rebuilds the same endpoint by address.
- selection/context/store/profiles: --ble address, remembered BLE default,
  and BLE device profiles all resolve to the right transport.
- UI/CLI: startup picker scans both transports behind a spinner and tags
  Bluetooth companions; `devices` lists them (--no-ble to skip); global
  --ble/--ble-pin flags; README and example config updated.

Validated on hardware: discovery, connect, reconnect, and channel
messaging (send + receive) over BLE.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 18:44:39 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 101b48bc71 Adopt the probed device and polish the startup splash
Rework the startup device picker into a self-contained splash flow:

- probe_meshcore (renamed from smoke_test_meshcore) now leaves the confirmed
  connection open and returns it, so AppContext.adopt_device reuses that live
  radio instead of reopening (many boards reset on each serial open). Restore
  the library's normal per-command timeout once the handshake succeeds.
- Extract the Braille animation into a reusable tui.Spinner; BusyScreen now
  delegates to it.
- Pin the wordmark to a fixed vertical anchor so it never shifts as the box
  swaps between the device list, spinner, and messages.
- Esc or a trailing Quit row leaves the splash and exits the program.
- Show the copyright only on the opening splash; retire it once a device is
  chosen, even across a failed smoke test and re-pick.
- Disable prompt_toolkit's loop exception handler and route asyncio (and the
  awaited spinner ticker) errors to the file log, so a stray background-task
  error can't dump a traceback over the full-screen UI.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-08 18:09:27 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 b692cce463 Confirm devices by smoke test on the startup splash
Reserve the "MeshCore device" tag for hardware we have actually talked to,
rather than guessing from the USB vendor ID:

- DeviceStore now keeps a registry of every confirmed device (keyed by
  stable serial id), remembered forever, migrating the old single-record
  file transparently.
- Selecting a device on the splash runs an immediate smoke test
  (smoke_test_meshcore): a genuine companion is remembered and confirmed;
  anything else re-prompts with a message to choose another. The probe uses
  a short handshake window so a non-MeshCore port is rejected cleanly in a
  few seconds instead of blocking on meshcore's full default timeout.
- The probe renders in place on the chromeless splash via a new BusyScreen
  (animated Braille spinner) driven by session.busy_startup, so the wordmark
  and box stay put instead of a separate progress dialog.
- Silence the meshcore library's console logging (its import calls
  logging.basicConfig, which printed "INFO:meshcore:..." over the TUI):
  route it to the JSON-lines file log with a NullHandler guard on root.
- The devices tool now marks confirmed devices and stops asserting "LoRa"
  before a device is proven.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-08 17:52:30 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 e52e5daf87 Draw the splash wordmark from a colored logo.ansi file
Replace the baked-in block-glyph constant with a pre-coloured logo.ansi read
fresh on every render, so the wordmark can be re-styled by editing that file
alone. It uses the ANSI Shadow face with green letters (#4ade80) and a
single-line dark-green bevel (#166534).

The banner path in compose_startup now centers already-coloured ANSI rows (as
one left-aligned block) rather than force-styling them a single colour, and a
new muted, centered footnote sits below the box — the splash uses it for a
"© <year> Homestead" copyright notice. The plain-text source is kept as
logo.txt for regenerating the art, and the old ansilogo.txt is removed.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-08 17:32:38 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 b66d1f7626 Redraw the startup device picker as a centered splash
The companion-device picker no longer borrows the in-menu frame. It is now a
chromeless splash: the MeshTerm wordmark, centered, above a box sized to the
device list rather than stretched across the terminal, with no header/footer
status bars.

A new `chrome` flag on Screen routes a base screen to `frame.compose_startup`,
which draws the banner and centers a content-sized panel. The device rows are
laid out in aligned columns (name / port / vendor / tag) under a muted header,
and type-to-filter is disabled (new `filterable` flag on SelectScreen) since the
list is short and fixed. The no-devices case gets the same splash treatment.

The wordmark lives in a code constant (meshterm/ui/logo.py, generated from
ansilogo.txt) so it survives installation regardless of packaged data files.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 23:19:47 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 61f4eff8dc Drop the Skip row from the device picker
The picker now lists only real discovered devices. Cancelling with Esc
still falls back to --mock / configure-later, so no behavior is lost.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 21:13:57 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 0c0880b37d Pick the companion device at startup only
The devices tool doubled as a mid-session device switcher: its menu
prompt re-ran the picker and reassigned the active device. Drop that so
selection is a startup-only concern (or --port on the CLI); the tool is
now a read-only inventory in both the menu and CLI.

With the re-pick gone, startup is the sole caller of prompt_device, so
its cancel_label parameter (added only to swap in a "Back" label) is
removed and the "Skip…" label inlined.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 20:36:51 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 2ec18138a7 Rename project from MeshTools to MeshTerm
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 19:40:49 -04:00