Commit Graph
9 Commits
Author SHA1 Message Date
Jean-Pierre MartineauandClaude Fable 5 94f565e61f Windowed lists everywhere the chrome should hold still
The atlas's list-in-a-fixed-screen pattern graduates to a shared
ListWindow (tui.screen): fit() settles the window, the marker rows, and
the highlight clamp together, and remembers the PgUp/PgDn stride; the
frame now records the viewport (or a dialog's budget) before render_body
runs so screens can size their chrome to it. Adopters: the dashboard
pins its charts and windows the feed; the trace screen pins route,
aggregates, and actions over a windowed results block; the path
composer pins the route preview over windowed suggestions (and gains
PgUp/PgDn); the nodes table pins its title, column header, and legend
around windowed rows. The composer's route preview and node rows also
join THE path widget, dropping its hand-rolled Name (hash) renderer.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-12 17:23:41 -04:00
Jean-Pierre MartineauandClaude Fable 5 e4a4e7c03b Tuning params: real float units per firmware; drop no-op TX delays
Checked against companion firmware (MyMesh.cpp CMD_SET_TUNING_PARAMS):
rx_delay_base and airtime_factor are floats carried x1000 on the wire
(constrained to 0-20 s and 0-9 respectively), so the settings now speak
real units — previously the raw wire integers were shown and edited,
making "2" mean 0.002.

The TX delay factors added in the previous commit are removed: the
companion handler reads exactly the two fields and ignores trailing
bytes, so they were silent no-ops. They exist only as remote-CLI
settings on repeater/room-server/sensor firmware.

Airtime factor now leads the Tuning section, ahead of RX delay.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 01:14:05 -04:00
Jean-Pierre MartineauandClaude Fable 5 42a22fd228 Expand device config: new settings, sync clock, and a live status panel
New staged settings: contact auto-add bitmask, default flood scope
(hashtag-normalized, 31-byte slot), and the two TX delay factors the
library always zeroed (write-only on hardware, so unknown values fall
back to 0 exactly as before). TX power is now capped by the board's
reported max_tx_power instead of a hardcoded 22, with the prompt hint
and validation sharing one effective_maximum.

Device actions gain Sync clock (drift shown before writing host time;
also a config sync-clock CLI command), and Device info now leads with
a live Status panel: role, model/firmware, battery, storage, clock
drift, uptime, and radio/packet statistics — every read best-effort so
older firmware still renders.

The simulator models all of it, including a seeded clock drift.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-10 00:20:15 -04:00
Jean-Pierre MartineauandClaude Fable 5 a23b12f6a4 Normalize UI copy: casing, headers, descriptions, backtracking
Enforce one voice across every screen: column and section headers are
UPPERCASE, menu items are Capitalized buttons, and short descriptions
drop their trailing period (with real ellipses instead of "...").

Tools gain a display `title` separate from their kebab-case CLI name,
so a menu item now reads exactly like the screen it opens ("Device
configuration" opens Device configuration) and result windows inherit
the same name. Every sub-screen backs out via a "Back" row below a
blank separator (the config editor was missing both; its Close is now
Back, spelling out the discard when changes are staged), while the main
menu and device picker keep "Quit". Panel and dialog titles now wear a
brighter tint of their border colour via new title.* theme styles.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-09 22:51:42 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 030c333450 Refine the node table: pinned header, steady sort, legend, and colours
Keep the Name/Heard/Pkts/Key labels pinned to the top row once the rows
scroll past them, and break metric ties by name ascending so equal-heard
nodes no longer flip between sort directions. Mute the packet count to
match the Heard column, and drop placeholder dashes to a darker gray so
they recede below the real values. Always list every node type in the
legend instead of only those currently present.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 02:55:20 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 6cfe435d55 Redesign the nodes page with heat-map recency and live sorting
Sort contacts alphabetically with our own node pinned first, and add
Heard (relative age) and Pkts (overheard-packet) columns alongside a
per-type glyph and the full path-hash-highlighted key. Drop the boxed
table for a clean header rule and a glyph legend.

Colour each name by a continuous log-scale heat map of how recently it
was heard (white -> yellow -> orange -> red -> grey), and give the
node-type icons a shared, map-safe palette across the whole app: a
yellow star for us, a loud pink node and a calmer violet repeater
(both in hues no basemap uses, so nodes pop more than repeaters),
a white room and an orange sensor.

In the menu the list becomes an interactive screen: left/right pick the
sort column (cyan header + direction triangle), up/down set ascending/
descending, with column widths reserved so toggling never shifts the
row. The scripted CLI keeps a one-shot render via --sort.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-09 02:38:28 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 2ec18138a7 Rename project from MeshTools to MeshTerm
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-07 19:40:49 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 89e1076a06 Show node hashes in trace tables and info panel
Annotate our own device with its hash on the route line, the per-trace
From→To table, and the per-hop medians table, truncated to the command's
path-hash width like every other hop. Unify link rendering on
_route_node_text so all three reads consistently as name (hash).

In the info panel, replace the standalone node-hash line with a Nodes
table: our node listed first with its name highlighted, and every node's
full public key shown with its path-hash prefix highlighted.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-21 12:26:09 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 421781f13d Fix auto-path traces, harden contacts retrieval, add device config tooling
Trace:
- Auto-path now ends every route at the target's own hash (verified on
  hardware: a trace only replies when its destination is the final hop), so
  direct neighbors and learned multi-hop routes both resolve correctly.
- Retry the transient "no event received during contacts retrieval" blip and
  surface a clean DeviceCommandError instead of a raw traceback.
- Route summary annotates each node with its hash at the command's path-hash
  width, wrapping after an arrow when the line is too long.
- Default trace count changed from 5 to 3.

Also includes the in-progress device-config feature (config_io, device_config,
config tool, config editor UI, tests) and related supporting edits.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-06-21 11:19:21 -04:00