Rework the device-configuration screen from a flat list with an
advert-laden "danger zone" into one grouped menu whose every prompt is
a real floating modal popup over a persistent backdrop, matching the
quit dialog. The main menu now stays pushed on the session stack for
the whole editor session, so sub-prompts float over it rather than
replacing the screen.
Settings are staged and applied together (with a dirty-cancel
confirmation); device actions — adverts, reboot, backup/restore,
identity key, factory reset — run immediately behind their own
dialogs. Adverts get a dedicated menu (zero-hop, flood, or share this
node as a QR/URI contact card). Destructive actions gate behind a new
TypedConfirmDialog that requires typing RESET / IMPORT. Reboot hands
off to the reconnect dialog and waits for the companion to return.
Location can be set by pointing at the full-screen map (new
LocationPickScreen) or by typing coordinates.
Make every dialog consistent: a short title in the border, the
instruction as an in-body prompt, and a width sized to its content
instead of a fixed wide cap. TextScreen/SelectScreen/AutocompleteScreen
gain an optional in-body prompt, and those plus ConfirmScreen gain a
dialog_width; the prompt is threaded through the surface and session.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The quit dialog grows a third button, shown only when the session is on a
Bluetooth link that Windows actually holds a bond for (never serial, an open
PIN-less companion, or a non-Windows platform). Choosing it disconnects the
link and then drops the OS-level pairing during teardown, so the next launch
re-runs the PIN ceremony. MeshTerm's remembered-device record is deliberately
kept — unpairing forgets the credential, not the device identity.
Backing this: static WinRT helpers is_ble_paired / unpair_ble mirroring
_pair_ble_windows (Windows-gated, best-effort), an active_address on the
context, and _can_unpair / _unpair_on_exit in the menu.
Also close the WinRT BluetoothLEDevice handles in every helper. Each
from_bluetooth_address_async returns an IClosable that pins the OS ACL link
open; unpair removes the bond but not the link, so a leaked handle left the
device "unpaired but still connected" and refusing to re-pair until it was
power-cycled. Closing the handle in a finally is what finally tears the link
down.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Query MeshCore's device-info frame (send_device_query) on connect to learn the
board's own model string (e.g. "Seeed Tracker T1000-E") — the only reliable source,
since BLE companions advertise no manufacturer data, use randomized addresses with
no IEEE OUI, and expose no GATT Device Information Service.
The probe folds the model into the identity dict, so it's captured during the
connection that already happens, then remembered in the device store (preserved
across reconnects like the node name). The device list and splash picker rename
their "Vendor" column to "Hardware": it shows the firmware model for confirmed
devices and falls back to the USB vendor name for merely-attached serial ports.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Companions can now be reached over Bluetooth as well as USB. Rather than
a parallel BLE path, this generalizes the existing serial abstractions so
a device is identified by a transport (serial | ble) plus a target (COM
port or Bluetooth address); every feature rides the same Device interface
and works over either link unchanged.
- discovery: DiscoveredDevice gains transport/address/name and
transport-aware stable_id/label/confidence/target; discover_ble_devices
scans for MeshCore* adverts via bleak, discover_all merges both.
- connection: MeshCoreDevice opens create_ble vs create_serial by
transport; new link_present() liveness (OS port enumeration for serial,
the BLE client's is_connected flag for Bluetooth); is_connection_lost
recognizes Bleak errors and BLE transport callbacks; probe_device is the
transport-aware smoke test.
- disconnect: the session watcher polls transport-neutral link_alive(), so
a dropped BLE link raises the same reconnect dialog and auto-resume as an
unplugged cable; reconnect rebuilds the same endpoint by address.
- selection/context/store/profiles: --ble address, remembered BLE default,
and BLE device profiles all resolve to the right transport.
- UI/CLI: startup picker scans both transports behind a spinner and tags
Bluetooth companions; `devices` lists them (--no-ble to skip); global
--ble/--ble-pin flags; README and example config updated.
Validated on hardware: discovery, connect, reconnect, and channel
messaging (send + receive) over BLE.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Watch the companion link while the menu runs; if it disconnects, float a
centered dialog with a spinner and a single Abort button while a
background task retries the connection. The dialog dismisses itself the
moment the device returns, so the user's only action is to give up:
Enter aborts, and Esc is deliberately inert so a stray keypress can't
drop the session while a replug may be a second away.
Give every popup dialog the same cyan reverse-highlight button. This
adds a "selected" theme style (and "err.reverse"): Rich silently renders
a style string that mixes a theme name with an attribute ("reverse
brand") as plain text, so the reverse is baked into a single-name theme
entry instead. Center the button chips with manual padding rather than
Text(justify="center"), which strips a styled span's trailing whitespace
and left the label hugging the fill's left edge.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rework the startup device picker into a self-contained splash flow:
- probe_meshcore (renamed from smoke_test_meshcore) now leaves the confirmed
connection open and returns it, so AppContext.adopt_device reuses that live
radio instead of reopening (many boards reset on each serial open). Restore
the library's normal per-command timeout once the handshake succeeds.
- Extract the Braille animation into a reusable tui.Spinner; BusyScreen now
delegates to it.
- Pin the wordmark to a fixed vertical anchor so it never shifts as the box
swaps between the device list, spinner, and messages.
- Esc or a trailing Quit row leaves the splash and exits the program.
- Show the copyright only on the opening splash; retire it once a device is
chosen, even across a failed smoke test and re-pick.
- Disable prompt_toolkit's loop exception handler and route asyncio (and the
awaited spinner ticker) errors to the file log, so a stray background-task
error can't dump a traceback over the full-screen UI.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Jean-Pierre MartineauandClaude Opus 4.8