The companion protocol reports only a battery voltage, so charging is a
voltage-trend inference. Some devices could instead expose the standard
GATT Battery Service (0x180F) whose Battery Level Status characteristic
(0x2BED, Battery Service 1.1) carries a real, firmware-reported charging
flag. Dumping the GATT table shows no current MeshCore build implements
it — the BLE profile is just the Nordic UART pipe plus DFU — but wire it
up now so it lights up automatically the day one does.
get_hw_charging() reads 0x2BED best-effort over BLE (reaching the bleak
client the forced-teardown path already uses) and prefers its flag; any
failure — service absent, read refused, short value, non-BLE transport —
is a quiet None, so the poller falls back to the inference and every
current device behaves exactly as before. Verified against a live device:
the read resolves and returns a clean, steady None. The 0x2BED bitfield
decode is a pure function unit-tested against the spec's Charge State enum
so the parse is correct ahead of any hardware that populates it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The firmware exposes no charging flag, so charging is inferred from the
terminal-voltage trend. The old test compared the first and last samples
in the window against a 15 mV threshold — but a single-cell LiPo sags
tens of millivolts under each LoRa transmission and springs back when the
radio idles, so a lone sagged sample at either endpoint read as a
+tens-of-mV "rise" and the gauge falsely showed charging on a discharging
or resting pack.
Read the trend from the median of the window's older half against the
median of its newer half (discarding the transient sag/recovery spikes)
and require a large, sustained rise, with hysteresis: hard to start
(25 mV), held while still clearly climbing (8 mV), and dropped the moment
the pack goes flat — topped off or unplugged.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a one-cell braille battery indicator to the status bar, shown only when
the companion reports a pack. The cell fills bottom-to-top in four tiers —
green healthy, orange at a quarter, red near empty — with the true percent
beside it; it blinks red↔dim when critically low and sweeps a filling
animation while charging. A session-long BatteryService polls the pack,
maps millivolts to a state-of-charge estimate off a single-cell LiPo curve,
and infers charging from a rising terminal voltage (firmware exposes no
charging flag). The header pins the gauge flush right and the activity
pulse cedes exactly the cells it needs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>