Commit Graph
5 Commits
Author SHA1 Message Date
Jean-Pierre MartineauandClaude Opus 5 f2a49c8e2d Editors keep their place too: rows change, the reader doesn't move
Six lists rebuilt themselves as a whole new screen every round, because their
content is data: an editor's rows carry a staged `current → new` value, its
title counts what is staged, the outbox loses the message it just sent, the
watchtower's log rewrites the row you acknowledged. Each approximated the cost
with `default=cursor`, which recovers only the cursor, and only while the row it
names still exists — the typed filter went every time.

SelectScreen.replace_items swaps the rows (and optionally the title) in place
instead. The place is kept by value, so the highlight lands back on its row
wherever that row moved to, and falls back to the same position in the list when
the row is gone entirely — which is what you want after deleting the row you
were sitting on. The filter rides along.

So the config editor, device actions, the channel manager, the courier outbox,
the watchtower and the repeater-admin editor all hold one screen for the whole
visit now, refreshed after each action. The courier's ticker is started once for
the visit rather than per round, and folds a flow's effect in immediately rather
than waiting up to a second for the next tick.

The admin node picker gains a `stay` form. Repeater admin used to draw a second,
identical SelectScreen as a static backdrop so the password prompt had something
behind it, then drop the list before the session; the real list stays up through
both now — so cancelling the password lands back on the node list rather than
bowing out of the flow, and leaving a node's admin session lands there too.
Administering two repeaters in a row is an Esc and a pick.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-30 13:38:26 -04:00
Jean-Pierre MartineauandClaude Opus 5 f870bff990 Node pickers: a repeater is still its own identity
The repeater-admin picker drew every name in the repeater violet, so a section of them
read as one node repeated — the one list in the app where telling two repeaters apart is
the whole point, and the only one that refused to.

Nothing regressed it; it was built that way. The row was `Text(glyph, style=type_style)`
with the name appended after, and a style on the Text *is* the row's base — Rich lays it
under every span, so the type colour that should have coloured one mark coloured the whole
line. The name never carried a style of its own to argue with it. The TX-optimize "measure
at" picker was the same row, copied.

So both build the row the way every other list of nodes does: the glyph takes its type
style as a span and the name takes `name_style(name, key)`, hued by the node's key like a
contact row, a watchlist row, a relay hop. That also puts the row back inside the selection
language — with no base style of its own, the cursor row's `cursor` white now reaches the
name span and folds it, which a type-styled base was quietly blocking.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-08-24 20:41:56 -04:00
Jean-Pierre MartineauandClaude Opus 5 0a41303366 Lists: what stays overhead is the section you are in
Two things a grouped list has to keep in view while it scrolls, and neither one
was staying: the lane names that read every row, and the heading that says which
group a row belongs to.

The lanes come first. A column header means the same thing in every section, so
it is not a section landmark at all — it pins for the *whole* list, above any
heading, once it scrolls off (`Separator(pinned=True)`). It is drawn outside the
body slice, so it stays exactly one row: too wide for the terminal it ellipsizes
rather than wrapping and stealing a second reserved row from the content. And it
can now size itself — a Separator title may be a callable taking the render
width — so `column_header`/`Lane` lay each label over its own lane and hand back
the shorter form (DESCRIPTION → DESC) only for the lanes that actually overrun,
from the right, where the trailing lane is the only one with a cell to give.
`lane_header` is that header for `lane_row`'s lanes, shared by the two editors so
they head identical lanes identically.

The headings were the other half, and they were pinning the wrong row. Every
non-pinned separator was a candidate, and the rule takes the last one at or above
the scroll — so what pinned was whatever muted line sat lowest under the heading.
In the Trophy case that meant a discipline's *description* stuck to the top and
the heading itself never did; at the foot of any list, the blank spacer above
Back pinned a blank row. So heading-ness is explicit now (`Separator.heading`,
conferred by `section_heading`, which is why every hand-rolled `── … ──` in the
app — the main menu's categories, the chat picker's Channels/Direct, Trace path's
candidate and ranked lists — now goes through it, and why three lanes headers
that genuinely *are* their block's only landmark say so).

A landmark is also no longer one line but a block: a heading plus the separators
written immediately under it, before the section's first row. Prose written there
is the section's preamble — the Trophy case's "what this discipline scores" — and
it belongs overhead with the heading rather than scrolling away from the rows it
explains. The block hands its rows over one at a time as they leave, so the
heading pins while its description is still the top content row and the two pin
together once both are gone: what is overhead always continues seamlessly into
the body. It never takes more than half the viewport, giving rows up from the
end, so the row that says *which* section this is is the last one dropped.

The frame settles the scroll against however many rows come back rather than
assuming one, and re-asks after sliding the window at the bottom — a heading
among the dropped lines would otherwise vanish instead of pinning.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
2026-07-29 04:13:14 -04:00
Jean-Pierre MartineauandClaude Opus 4.8 310783c6a3 Repeater admin: float the login over the node picker, not a blank frame
The admin-login password prompt ran on an empty stack (the picker was popped
when it returned), so session.text pushed a blank base and the prompt — and any
"wrong password" rejection — floated over an erased background.

open_repeater_admin now redraws the node picker as a static backdrop (extracted
admin_picker_rows, shared with the live pick so they can't drift) and keeps it
pushed across _login, with the picked node highlighted. The password box and the
rejection float over the picker, matching the device-picker and trophy-case
dialogs. floating=True stays on the prompt as a belt-and-suspenders fallback.

Also drop the inert floating=True on tx_optimize._resolve_password: that
resolver only runs on the scripted CLI path (PlainUi, no stack), so the flag
never did anything — the menu path logs in inside the pushed sweep screen.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
2026-07-16 20:33:12 -04:00
Jean-Pierre MartineauandClaude Fable 5 aef80d18bb Repeater admin: set up remote nodes over the mesh
A new Device management entry for administering repeaters and room
servers. The shared credentialed-first picker (extracted from TX
optimize) chooses the node, login runs on remembered passwords with a
one-time prompt otherwise (forgotten on rejection), and the editor
lands in the local device-configuration screen's exact lanes — but
speaking the node's text CLI through a new public
Device.send_remote_command, which brings the repeater-only knobs the
local editor never had: TX delay, Direct TX delay, RX delay, airtime
factor, advert intervals, flood max, repeat, guest password.

Reads cost one paced mesh round trip each, so the editor never
bulk-reads on open: values show what the last read said, age-stamped,
from a new per-node remote.json cache; Read settings refreshes them
under an abortable progress dialog and Apply sends the staged sets
the same way, folding confirmed values back into the cache and
keeping refused ones staged. Advert, clock sync, password change, and
reboot run as confirmed popups.

The Command line is a readline-style screen onto the node's raw CLI:
per-node history persisted across sessions (↑↓ recall, adjacent-dupe
suppression, capped), Tab completion over the known verbs plus every
catalog get/set spelling with ghost-text preview, one command in
flight at a time. The simulator grows a full repeater CLI so all of
it drives against --mock, and a scripted one-shot
(repeater-admin <node> <command…>) covers automation.

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
2026-07-11 04:14:16 -04:00