Two rows renamed, and the rename carried into the screens they open —
the config editor's table title and its staged-count header, the support
page's own title (it comes from the tool, so it followed on its own).
"Support this project" never said which project; the menu is MeshTerm's
and the section above it is already About MeshTerm, so the name is the
useful half of that phrase. "Device configuration" was the longest label
in the list and set the width of the whole name column: at 19 cells
instead of 23, every description now gets 51 and the widest row is 68.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The label column is the widest tool title plus two cells of gap, which
leaves the muted description 47 to work in. All 22 of them ran past it —
"Act on the device itself — clock, backup, identity key, reboot, reset"
needed 94 columns of terminal to say what 67 could. The row scrolled
under ←→ rather than lying, but a description you have to scroll is a
description nobody reads.
Rewritten to fit: the subject moves into the title's shadow (the row
already says Device actions, so the description just lists them), the
parenthetical asides go, and the trailing clause that repeated the
obvious goes with them. Widest row is now exactly 72.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The menu asks "What would you like to do?" and then grouped its rows by
subject, which is not an answer to that. Mesh had grown to seven of the
nineteen rows — live watching, passive browsing, and one transmit action
in the same bucket — and Tools said nothing at all, since everything in
the menu is a tool.
So each section now names a doing, and holds what shares it:
Message Chat · Channels · Courier · Contacts
Watch Dashboard · Live feed · Watchtower · Time machine
Explore Map · Mesh walk · Trace target · Trace path · Trophy case
This node Device info · Device configuration · Device actions · Send advert
Other nodes Repeater admin · TX optimize
Four rows moved for a reason. Contacts is the address book the three
features above it pick a recipient from, not a mesh view. Time machine is
the past tense of the Dashboard, and was stranded in the grab-bag. Send
advert is your own node announcing itself — a device action, filed with
the mesh views only because it was about the mesh. And Repeater admin and
TX optimize are the same job — someone else's radio, over the mesh, with
credentials — which the old Device-management/Tools split hid.
The two walks join the topology views they walk over, with the boards
that score them underneath: see a node, walk to it, get scored. Nothing
is renamed (a menu row still names the screen it opens) and no section is
now larger than five rows or smaller than two.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A firmware-less radio bridge holds its configuration only in RAM, so the node
name, radio parameters, and tuning set through MeshTerm are back to firmware
defaults when the bridge process restarts. Record every setting changed through
MeshTerm (editor, config CLI, and TOML restore all funnel through _apply_setting),
keyed by the device's own public key.
Unlike channels — silently replayed because filling an empty slot overwrites
nothing — a setting is a single canonical value, so replaying a stale one could
clobber a change made elsewhere. So the store never writes on its own: on connect
it detects drift between what it remembers and what the device reports, and a
startup offer lets the operator restore the saved values, adopt the device's
current ones, or stop remembering the device (the "don't ask again" exit). The
offer is quiet unless a connected device actually drifts, so a firmware radio you
don't manage through MeshTerm is never interrupted.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Add TCP alongside serial and BLE as a first-class companion transport, end to
end: discovery/connection/selection learn a tcp: stable_id and host:port target,
--tcp and TCP config profiles reach a WiFi board or network proxy, and a network
companion -- which isn't discoverable -- is rebuilt into the picker from its
remembered endpoint.
Device picker gains the network-device affordances:
- "Add a network device" prompts for host:port, smoke-tests it, and remembers it.
The row is marked "- experimental" in the cautionary hue.
- Delete on a network row opens a chromeless Cancel/Remove confirm (Cancel left,
Remove right and default: Enter removes, Esc cancels), then DeviceStore.forget
prunes it and re-draws the list. Serial/BLE rows stay inert.
- The "Del remove" footer atom now follows the highlight, surfacing on the box's
bottom border only while the cursor sits on a deletable row; the box is sized
to the fullest footer so it never widens mid-navigation.
Folds in the accompanying courier, channels, and config refinements built along
the way. Screens stay readable at 72 cols; full suite green (745 tests).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Opening a screen re-read the same stable facts from the companion every time — the contacts table, self-info, the path-hash mode, the channel-slot probe. Over Bluetooth each is a round-trip, and on a busy node two dominate: get_contacts (~2.4 s with hundreds of contacts) and the channel probe (~2.6 s, it walks every slot index), so navigation stalled for seconds on each screen. Measured on hardware; and asyncio.gather makes it worse, not better — the meshcore BLE UART serializes commands, so concurrent reads collide.
DeviceState (ctx.devstate) reads each fact once and serves it from cache. Contacts use stale-while-revalidate on a 90 s TTL — a read past it returns the cached list instantly and refreshes behind it, never blocking navigation on the slow call. Self-info, path-hash mode, and channel slots are held until an in-app write invalidates them: config apply drops self-info + mode, the channel editor drops channels, a reconnect resets everything. The hot screen openers (nodes, dashboard, chat, trace, TX, map, atlas, time machine, courier, watchtower) now read through the cache. The first screen opened in a session still pays the one read — shared across every screen — and every open after is instant. Transport-agnostic, so serial benefits too; harmless on --mock.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Messaging becomes Mesh and takes in Nodes (between Channels and Map —
the "who's out there" view) and Send advert (last in section: its one
action, after its views), so everything mesh-wide lives under one
heading. Device becomes Device management and keeps the box-level
tools; Diagnostics becomes Tools.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Tools gain an icon attribute — menu-only, so result windows and the
CLI keep the plain title — and the menu loop composes it into the
aligned name lane. Single-codepoint, emoji-presentation glyphs only,
so the two-cell width holds across terminals: 💬 Chat, 📻 Channels,
🌍 Map, 👥 Nodes, 📡 Send advert, 🔧 configuration, 🔨 actions,
📋 info, 🎯/👣 the traces, 🎧 Monitor, 📶 TX optimize, 🚪 Quit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
MeshTerm now announces the connected node by itself: a zero-hop advert
every 1/2/3/4 hours (default hourly) and a flood advert every
3/6/12/24/48/168 hours (default daily), each switchable off. The
cadences are staged and applied from a new Background adverts section
in the device-configuration editor, and persist per device (keyed by
public key) in adverts.json alongside the last-sent mark for each type
— so the countdown survives restarts, and a manual send from any
advert flow resets the same clock the scheduler reads.
The scheduler stays transmission-shy: at most one advert per 30 s pass
(a flood due together with a direct waits a pass), and a never-sent
device is armed to count from now rather than advertised immediately.
It holds no device subscription — each pass just skips when nothing is
connected — so reconnects need no special handling, and scripted CLI
runs never start it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Announcing the node is the everyday operation in the Device actions
bucket, but it sat two screens deep and out of reach of the main menu's
type-to-filter. Give it a top-level entry (order 10, right after Device
actions; Device info shifts to 11) via a new menu-only tool that reuses
the existing advert flow through a standalone send_advert() entry point.
Only SELF_INFO is read on open — the advert op and contact card never
need the full snapshot — so it stays snappy over Bluetooth. The row
inside Device actions stays, and scripting remains under `config
advert` / `config share`, so no new CLI subcommand.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
New staged settings: contact auto-add bitmask, default flood scope
(hashtag-normalized, 31-byte slot), and the two TX delay factors the
library always zeroed (write-only on hardware, so unknown values fall
back to 0 exactly as before). TX power is now capped by the board's
reported max_tx_power instead of a hardcoded 22, with the prompt hint
and validation sharing one effective_maximum.
Device actions gain Sync clock (drift shown before writing host time;
also a config sync-clock CLI command), and Device info now leads with
a live Status panel: role, model/firmware, battery, storage, clock
drift, uptime, and radio/packet statistics — every read best-effort so
older firmware still renders.
The simulator models all of it, including a seeded clock drift.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Dialog footer hints take the border's hue one shade darker (hint.*
theme styles), mirroring the brighter title tinting.
- Dialogs get a blank breathing row above and below the body whenever
it doesn't cost visible content.
- The chat conversation picker gains column headers over its lanes.
- The map screen titles itself "Map", matching its menu item.
- The config editor lays settings out in aligned SETTING / VALUE /
DESCRIPTION columns under a header line, and with changes staged the
Apply and Back rows sit together below the blank separator.
- Device actions move out of the config editor into their own screen
behind a new menu-only device-actions tool (CLI equivalents stay
under the config group).
- Type-to-filter keeps section headers (and column headers) in place,
and section jumps now work over the filtered rows too.
- The main menu aligns tool names and muted descriptions into two
columns, headerless.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Enforce one voice across every screen: column and section headers are
UPPERCASE, menu items are Capitalized buttons, and short descriptions
drop their trailing period (with real ellipses instead of "...").
Tools gain a display `title` separate from their kebab-case CLI name,
so a menu item now reads exactly like the screen it opens ("Device
configuration" opens Device configuration) and result windows inherit
the same name. Every sub-screen backs out via a "Back" row below a
blank separator (the config editor was missing both; its Close is now
Back, spelling out the discard when changes are staged), while the main
menu and device picker keep "Quit". Panel and dialog titles now wear a
brighter tint of their border colour via new title.* theme styles.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Rework the device-configuration screen from a flat list with an
advert-laden "danger zone" into one grouped menu whose every prompt is
a real floating modal popup over a persistent backdrop, matching the
quit dialog. The main menu now stays pushed on the session stack for
the whole editor session, so sub-prompts float over it rather than
replacing the screen.
Settings are staged and applied together (with a dirty-cancel
confirmation); device actions — adverts, reboot, backup/restore,
identity key, factory reset — run immediately behind their own
dialogs. Adverts get a dedicated menu (zero-hop, flood, or share this
node as a QR/URI contact card). Destructive actions gate behind a new
TypedConfirmDialog that requires typing RESET / IMPORT. Reboot hands
off to the reconnect dialog and waits for the companion to return.
Location can be set by pointing at the full-screen map (new
LocationPickScreen) or by typing coordinates.
Make every dialog consistent: a short title in the border, the
instruction as an in-body prompt, and a width sized to its content
instead of a fixed wide cap. TextScreen/SelectScreen/AutocompleteScreen
gain an optional in-body prompt, and those plus ConfirmScreen gain a
dialog_width; the prompt is threaded through the surface and session.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>