On the PicoCalc a repaint costs about 154ms, and these two loops waited 60ms
(the overlay) and 120ms (the splash) between them — rates hardcoded past
spinner_interval(), which every other animated wait in the app already sleeps
on. The animation asked for repaints faster than the console could finish them,
so it took the event loop from the device read it was covering for: the wait got
slower for being animated, and the spinner stuttered anyway. Both defer to the
platform now (0.5s there, 0.12s on the desktop).
Two calls were also blocking the loop outright, which stops the animation dead
however it is paced. Enumerating serial ports is a SetupAPI/sysfs walk — behind
the "Scanning for companion devices…" splash, and again on every poll of the
reconnect dialog — so both go to a thread. The UI itself cannot: prompt_toolkit
owns the loop for render and keys. Moving the blocking work off it is the same
fix from the other side.
Two tests: neither busy screen may carry a spin rate of its own, and the
spinner advances *during* an awaited read rather than only side of it.
Also drops the "· experimental" tag from the network-device row.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A soldered SoC UART like the Luckfox Lyra's /dev/ttyS1 is never enumerated by
pyserial's comports(), so a serial [profiles.*] entry pointing at one could only
ever be reached via `meshterm --port` on the command line -- it never surfaced in
the startup picker, which listed only scanned devices (and TCP profiles). Fold
configured serial profiles into the picker too, mirroring the existing TCP-profile
folding, de-duplicated by port so a port pyserial *does* enumerate keeps its richer
scanned row.
Also fix the liveness poll for the same ports: serial_port_present() now treats an
existing /dev character device as present (platform UARTs aren't in comports() but
their node persists exactly as long as the port does; a USB node vanishes on unplug,
so this never masks a real disconnect). Without it the watcher would falsely report
a soldered radio unplugged mid-session.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add TCP alongside serial and BLE as a first-class companion transport, end to
end: discovery/connection/selection learn a tcp: stable_id and host:port target,
--tcp and TCP config profiles reach a WiFi board or network proxy, and a network
companion -- which isn't discoverable -- is rebuilt into the picker from its
remembered endpoint.
Device picker gains the network-device affordances:
- "Add a network device" prompts for host:port, smoke-tests it, and remembers it.
The row is marked "- experimental" in the cautionary hue.
- Delete on a network row opens a chromeless Cancel/Remove confirm (Cancel left,
Remove right and default: Enter removes, Esc cancels), then DeviceStore.forget
prunes it and re-draws the list. Serial/BLE rows stay inert.
- The "Del remove" footer atom now follows the highlight, surfacing on the box's
bottom border only while the cursor sits on a deletable row; the box is sized
to the fullest footer so it never widens mid-navigation.
Folds in the accompanying courier, channels, and config refinements built along
the way. Screens stay readable at 72 cols; full suite green (745 tests).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two long-standing flakes, one root cause each:
Quit with a serial companion often froze until the exit watchdog killed
the process. The meshcore dispatcher's stop() awaits queue.join(), but
its processor task exits after draining at most one event once stopped —
so a routine advert/RX-log burst (two+ events queued at that instant)
deadlocks the join forever (repro confirmed against the installed
library). MeshCoreDevice.disconnect now gives the graceful teardown two
seconds, then abandons it: the dispatcher task is cancelled synchronously
and the raw transport closed directly, so the port is still released and
even the forced path finishes well under the watchdog.
BLE startup often failed until the user re-selected the device. Connecting
by bare address makes bleak re-discover the peripheral with a fresh
internal scan, which on Windows intermittently misses a slow-advertising
companion. The discovery scan's live BLEDevice now rides along
(DiscoveredDevice -> probe/context -> create_ble) so the connect opens the
peripheral directly, and a transport-level ConnectionError is retried once
before surfacing — the manual re-select was never anything but a retry.
PIN/bond rejections still surface on the first attempt, unlooped.
Verified against hardware: BLE info read off the Waymarker connects and
exits cleanly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Reworks the startup device picker so it reads honestly at a glance:
- VENDOR is now just the hardware maker. A BLE advert rarely carries one
(confirmed against real hardware: the companion advertises no
manufacturer_data), so it stays blank instead of mislabelling the
transport "Bluetooth" as a vendor.
- A new TYPE column marks the transport with an icon: a plug emoji for
wired serial, and the Bjarkan rune the Bluetooth logo is drawn from,
rendered white on Bluetooth blue and flanked by half-block slivers so
it reads as a slim rounded badge.
- Every confirmed companion (not just the most-recent one) is shown by
the mesh node name learned at connect time, so a known COM11 reads as
its node name rather than the OS's generic "USB Serial Device".
- Confirmed companions sort to the top, most-recently-used first, and
wear their name in white so they stand out from merely-detected ports.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Companions can now be reached over Bluetooth as well as USB. Rather than
a parallel BLE path, this generalizes the existing serial abstractions so
a device is identified by a transport (serial | ble) plus a target (COM
port or Bluetooth address); every feature rides the same Device interface
and works over either link unchanged.
- discovery: DiscoveredDevice gains transport/address/name and
transport-aware stable_id/label/confidence/target; discover_ble_devices
scans for MeshCore* adverts via bleak, discover_all merges both.
- connection: MeshCoreDevice opens create_ble vs create_serial by
transport; new link_present() liveness (OS port enumeration for serial,
the BLE client's is_connected flag for Bluetooth); is_connection_lost
recognizes Bleak errors and BLE transport callbacks; probe_device is the
transport-aware smoke test.
- disconnect: the session watcher polls transport-neutral link_alive(), so
a dropped BLE link raises the same reconnect dialog and auto-resume as an
unplugged cable; reconnect rebuilds the same endpoint by address.
- selection/context/store/profiles: --ble address, remembered BLE default,
and BLE device profiles all resolve to the right transport.
- UI/CLI: startup picker scans both transports behind a spinner and tags
Bluetooth companions; `devices` lists them (--no-ble to skip); global
--ble/--ble-pin flags; README and example config updated.
Validated on hardware: discovery, connect, reconnect, and channel
messaging (send + receive) over BLE.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>