Warm opens are instant, but the first open in a session still paid the
one-time reads (contacts, the channel-slot probe) in the navigation path —
so opening the menu after login, then the first Chat, read as two separate
stalls. Fold them into one quiet wait behind the menu instead.
DeviceState.prewarm() spawns a tracked background task that fetches contacts
then the channel slots (sequential — concurrent reads collide on the BLE
UART), best-effort and cancelled on reset/close. _resume_monitor kicks it off
once the link is up (only when connected — a deferred connect warms lazily on
first use). A getter reached before the warm finishes awaits the same
in-flight fetch, so it never doubles a read.
The channel probe itself still walks every slot on firmware that doesn't
reject out-of-range indices; bounding that is a separate change, deferred on
purpose — a long one-time poll behind the menu is fine for now.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a one-cell braille battery indicator to the status bar, shown only when
the companion reports a pack. The cell fills bottom-to-top in four tiers —
green healthy, orange at a quarter, red near empty — with the true percent
beside it; it blinks red↔dim when critically low and sweeps a filling
animation while charging. A session-long BatteryService polls the pack,
maps millivolts to a state-of-charge estimate off a single-cell LiPo curve,
and infers charging from a rising terminal voltage (firmware exposes no
charging flag). The header pins the gauge flush right and the activity
pulse cedes exactly the cells it needs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the between-screens ring spinner with a titled skeleton card: a
heading, the one-cell working chip beside a "reading from <device>…"
caption, and a two-row braille LED bar in place of the old ring.
The bar is a Knight-Rider scanner — a red head sweeps left↔right and
bounces off both ends over a dark-gray track, dragging a persistence-of-
vision comet trail (per-tick decay) with a white-hot core. It rides the
same tick that spins the chip and fades in from black with the card, so
the wait reads as work rather than a frozen bar.
Thread an optional title/caption through busy_overlay so each gap names
the screen being fetched and the companion it's reading from. Give the
CLI progress dialog the same liveness: a spinning chip on every row and a
slim braille meter, with no dead track on indeterminate tasks. Drop the
now-unused RingSpinner.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The key hints now follow one sentence shape across every screen:
navigation keys first, action keys next, Esc last — the quit dialog and
TX apply dialog had Esc leading. The Esc verb is now systematic: "Esc
back" leaves a screen, "Esc close" dismisses a read-only floating view
(result windows and the share/key popups switch over), "Esc cancel"
abandons a prompt, "Esc keep" leaves a value picker unchanged. Bare
hints fill in their missing verbs ("↑↓ move", the map's and composer's
naked "Esc"), the confirm prompt says "Enter select" like its button
siblings, and key notation unifies on the compact forms the app already
half-used: ^R/^End for Ctrl chords (chat's "Ctrl-R" included) and ⌫ for
backspace (the map/atlas "Bksp").
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
timeline_rows and activity_sparkline accept per-column style overrides,
and the monitor exposes which histogram buckets this session actually
heard. The header pulse draws seeded history grey and live traffic
green, so a restart is visible in the chart instead of masquerading as
fresh reception; the dashboard chart follows in the next commit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Both sparklines draw through ui.braillechart, so the current minute lands
at the right edge and history trails left (JP reversed the earlier
newest-left convention). The header also sheds the events-hub live-dot —
it cost cells and read as noise — and drops its roomy separators to a
compact " · " whenever they would squeeze the pulse below 24 cells, so a
72-column terminal keeps a readable stretch of graph.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Queue a direct message for a node that isn't reachable right now and a
session-long background loop delivers it when the recipient is next
heard — or at a scheduled local time ("next 07:00", "in 3 h", any
HH:MM). Each attempt is an ordinary chat send (it lands in the
conversation history with its ack state, exactly as if typed); failures
back off exponentially and, after the first shot, wait until the node
is heard again, so an absent node is never hammered on faith. One
attempt per pass keeps a backlog draining politely, and after five
unacknowledged tries the courier gives up and says so. Outcomes raise
Watchtower alerts, so the header's badge lights when an overnight
delivery finally lands.
The outbox persists in courier.json (a queued message must survive
restarts or the promise is hollow), a Mesh-section screen carries the
queueing flow, per-entry Send now / Cancel, and the finished history,
and a scripted `courier <node> <text…> [--at HH:MM]` queues without
transmitting anything.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Star the nodes that matter (the roof repeater, the far gateway) and
session-long rules watch what the always-on hub already hears: a
silence alarm when a starred node goes quiet past its threshold
(latched per quiet spell, re-armed — with a recovery note — when it
returns), an SNR-sag warning when its receptions' median drops well
below the run before it, and a mesh-wide heads-up the first time a
never-before-seen node id appears (baselined against the whole stored
observation history, announced at most once ever). Nothing transmits.
Alerts persist in watchtower.json alongside the watchlist and rules,
show as a red ▲ badge in the header, and are read, acknowledged, and
configured in a new Mesh-section Watchtower screen. A remote-battery
rule was considered and dropped: observations carry no parsed battery
telemetry, so there is no honest data source for it yet.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The persistent header's activity indicator now draws one minute per
braille dot column and stretches to consume every cell the fixed
segments leave, so a wider terminal simply shows deeper history instead
of a fixed two hours. Thresholds drop to 1/3/8/21 packets per minute to
match the finer buckets.
The session's header callable now receives the terminal width — it was
the only way for the header to know how far it may stretch, and the
width is already known at both call sites.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The main-menu advert entry ran the same flow as Device actions but
replaced the screen instead of floating over it. Tools can now declare
popup = True to run while the menu stays pushed — their prompts and
result draw as modal dialogs over it, the quit-dialog pattern — and
the advert tool does, so both doors into the flow looked and felt the
same. With the popup one keystroke away there was no reason to keep
the second door: the Device actions row is gone, leaving that screen
to the box-level operations (clock, backup, key, reboot, reset).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Tools gain an icon attribute — menu-only, so result windows and the
CLI keep the plain title — and the menu loop composes it into the
aligned name lane. Single-codepoint, emoji-presentation glyphs only,
so the two-cell width holds across terminals: 💬 Chat, 📻 Channels,
🌍 Map, 👥 Nodes, 📡 Send advert, 🔧 configuration, 🔨 actions,
📋 info, 🎯/👣 the traces, 🎧 Monitor, 📶 TX optimize, 🚪 Quit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The envelope glyph gives way to the ● err-red dot with its warn-tinted
count — the same badge the channel list and conversation picker draw —
so unread reads identically everywhere it appears.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The status bar drops the static "device:" prefix and the heard
counters. The device segment now leads with the node's own mesh name —
the remembered registry name, then the profile alias, then the
hardware name — with where it's reached in parentheses (the COM port,
or BLE), cached per connection so repaints never re-read the registry
file.
The heard numbers give way to an unread badge (channels and direct,
shown only when something waits) and a two-hour braille activity
indicator: every packet the hub hears — adverts, telemetry, messages,
acks — lands in a five-minute bucket, drawn twelve characters wide at
1/5/21/89 thresholds with the ●/○ live-light in front. The braille
sparkline renderer moves from the channel manager to widgets so both
draw with one brush.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
MeshTerm now announces the connected node by itself: a zero-hop advert
every 1/2/3/4 hours (default hourly) and a flood advert every
3/6/12/24/48/168 hours (default daily), each switchable off. The
cadences are staged and applied from a new Background adverts section
in the device-configuration editor, and persist per device (keyed by
public key) in adverts.json alongside the last-sent mark for each type
— so the countdown survives restarts, and a manual send from any
advert flow resets the same clock the scheduler reads.
The scheduler stays transmission-shy: at most one advert per 30 s pass
(a flood due together with a direct waits a pass), and a never-sent
device is armed to count from now rather than advertised immediately.
It holds no device subscription — each pass just skips when nothing is
connected — so reconnects need no special handling, and scripted CLI
runs never start it.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The on/off switch never made sense for a pure listener: recording is
now unconditional, so the toggle submenu, the persisted preference
(MonitorStore/monitor.json), and the header's ON/OFF framing are gone.
The monitor registers its hub subscription at startup — a device-free
step that cannot fail — and its run row opens lazily on the first
observation, so recording follows the hub wherever it opens (eagerly,
or deferred by connect_on_start) and silent sessions leave no empty
runs. The menu entry is now just the read side, "Heard nodes", and the
header shows live heard counters instead of a switch state.
meshterm monitor on the CLI drops --on/--off for a bounded foreground
capture (--seconds N, 0 = until Ctrl-C, mirroring chat listen): it
tails each overheard packet live and summarizes the window's heard
nodes when it ends, while persisting history exactly like a session.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Dialog footer hints take the border's hue one shade darker (hint.*
theme styles), mirroring the brighter title tinting.
- Dialogs get a blank breathing row above and below the body whenever
it doesn't cost visible content.
- The chat conversation picker gains column headers over its lanes.
- The map screen titles itself "Map", matching its menu item.
- The config editor lays settings out in aligned SETTING / VALUE /
DESCRIPTION columns under a header line, and with changes staged the
Apply and Back rows sit together below the blank separator.
- Device actions move out of the config editor into their own screen
behind a new menu-only device-actions tool (CLI equivalents stay
under the config group).
- Type-to-filter keeps section headers (and column headers) in place,
and section jumps now work over the filtered rows too.
- The main menu aligns tool names and muted descriptions into two
columns, headerless.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Enforce one voice across every screen: column and section headers are
UPPERCASE, menu items are Capitalized buttons, and short descriptions
drop their trailing period (with real ellipses instead of "...").
Tools gain a display `title` separate from their kebab-case CLI name,
so a menu item now reads exactly like the screen it opens ("Device
configuration" opens Device configuration) and result windows inherit
the same name. Every sub-screen backs out via a "Back" row below a
blank separator (the config editor was missing both; its Close is now
Back, spelling out the discard when changes are staged), while the main
menu and device picker keep "Quit". Panel and dialog titles now wear a
brighter tint of their border colour via new title.* theme styles.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Rework the device-configuration screen from a flat list with an
advert-laden "danger zone" into one grouped menu whose every prompt is
a real floating modal popup over a persistent backdrop, matching the
quit dialog. The main menu now stays pushed on the session stack for
the whole editor session, so sub-prompts float over it rather than
replacing the screen.
Settings are staged and applied together (with a dirty-cancel
confirmation); device actions — adverts, reboot, backup/restore,
identity key, factory reset — run immediately behind their own
dialogs. Adverts get a dedicated menu (zero-hop, flood, or share this
node as a QR/URI contact card). Destructive actions gate behind a new
TypedConfirmDialog that requires typing RESET / IMPORT. Reboot hands
off to the reconnect dialog and waits for the companion to return.
Location can be set by pointing at the full-screen map (new
LocationPickScreen) or by typing coordinates.
Make every dialog consistent: a short title in the border, the
instruction as an in-body prompt, and a width sized to its content
instead of a fixed wide cap. TextScreen/SelectScreen/AutocompleteScreen
gain an optional in-body prompt, and those plus ConfirmScreen gain a
dialog_width; the prompt is threaded through the surface and session.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Menu navigation over a slow link (Bluetooth especially, but serial too)
can sit on a blank frame while the companion answers — the menu screen is
popped and the tool's first prompt not yet pushed. Fill that gap with a
top-of-z-order spinner so the wait reads as work, not a hang.
- RingSpinner: a reusable, screen-agnostic braille circle with a cyan->blue
comet chasing the rim. Plotted a quarter-arc and mirrored for exact 4-fold
symmetry; stroked over a band of radii so it reads clearly as a circle.
- BusyOverlay + TuiSession.busy_overlay: draw the ring as the top-most float,
centered, only in the gaps between screens (empty stack) so it never buries
a prompt. It holds black for 200ms then fades in over 400ms, so quick work
shows nothing and longer work never pops in. The fade restarts every time
the ring is re-exposed (pop/reset), not just on first display.
- Wire it into menu navigation and the post-splash monitor resume for any
real device link (mock simulator opts out); surfaced via ctx.ui.busy_overlay.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The quit dialog grows a third button, shown only when the session is on a
Bluetooth link that Windows actually holds a bond for (never serial, an open
PIN-less companion, or a non-Windows platform). Choosing it disconnects the
link and then drops the OS-level pairing during teardown, so the next launch
re-runs the PIN ceremony. MeshTerm's remembered-device record is deliberately
kept — unpairing forgets the credential, not the device identity.
Backing this: static WinRT helpers is_ble_paired / unpair_ble mirroring
_pair_ble_windows (Windows-gated, best-effort), an active_address on the
context, and _can_unpair / _unpair_on_exit in the menu.
Also close the WinRT BluetoothLEDevice handles in every helper. Each
from_bluetooth_address_async returns an IClosable that pins the OS ACL link
open; unpair removes the bond but not the link, so a leaked handle left the
device "unpaired but still connected" and refusing to re-pair until it was
power-cycled. Closing the handle in a finally is what finally tears the link
down.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
When a companion needs pairing, the interactive picker now opens a centered PIN
popup (its own bordered box under the wordmark, matching the splash) and retries the
connection with the entered code — re-asking with a "rejected" note on a wrong PIN,
and returning to the device list on Esc. The masked field clears its stale error as
soon as the user types a fresh code.
The connect failure is now a distinct DeviceAuthenticationError (a DeviceCommandError
subclass), so the picker can catch "needs a PIN" specifically while the scripted CLI
still catches the base class, prints the remedy (pass --ble-pin), and bails without a
prompt — no interactivity for scripted runs. --ble-pin already feeds the first attempt.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Companions can now be reached over Bluetooth as well as USB. Rather than
a parallel BLE path, this generalizes the existing serial abstractions so
a device is identified by a transport (serial | ble) plus a target (COM
port or Bluetooth address); every feature rides the same Device interface
and works over either link unchanged.
- discovery: DiscoveredDevice gains transport/address/name and
transport-aware stable_id/label/confidence/target; discover_ble_devices
scans for MeshCore* adverts via bleak, discover_all merges both.
- connection: MeshCoreDevice opens create_ble vs create_serial by
transport; new link_present() liveness (OS port enumeration for serial,
the BLE client's is_connected flag for Bluetooth); is_connection_lost
recognizes Bleak errors and BLE transport callbacks; probe_device is the
transport-aware smoke test.
- disconnect: the session watcher polls transport-neutral link_alive(), so
a dropped BLE link raises the same reconnect dialog and auto-resume as an
unplugged cable; reconnect rebuilds the same endpoint by address.
- selection/context/store/profiles: --ble address, remembered BLE default,
and BLE device profiles all resolve to the right transport.
- UI/CLI: startup picker scans both transports behind a spinner and tags
Bluetooth companions; `devices` lists them (--no-ble to skip); global
--ble/--ble-pin flags; README and example config updated.
Validated on hardware: discovery, connect, reconnect, and channel
messaging (send + receive) over BLE.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
By the time the interactive menu is up a companion is already selected,
so the read-only devices listing has no job there; it belongs on the
command line as a startup-time "which port is my radio?" diagnostic.
Add a menu_visible flag to the Tool contract (skipped by the menu loop,
never by CLI registration) and set it False on the devices tool.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Watch the companion link while the menu runs; if it disconnects, float a
centered dialog with a spinner and a single Abort button while a
background task retries the connection. The dialog dismisses itself the
moment the device returns, so the user's only action is to give up:
Enter aborts, and Esc is deliberately inert so a stray keypress can't
drop the session while a replug may be a second away.
Give every popup dialog the same cyan reverse-highlight button. This
adds a "selected" theme style (and "err.reverse"): Rich silently renders
a style string that mixes a theme name with an attribute ("reverse
brand") as plain text, so the reverse is baked into a single-name theme
entry instead. Center the button chips with manual padding rather than
Text(justify="center"), which strips a styled span's trailing whitespace
and left the label hugging the fill's left edge.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Buttons read Cancel then Quit, with Quit highlighted so Enter commits it
and Esc cancels. The question is orange, the selected button cyan, and the
idle button gray, so the current choice is unmistakable.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Choosing "quit" or pressing Esc at the top menu asked to leave through a
horizontal Yes/No toggle that sat at odds with the rest of the TUI, which is
select lists everywhere else. Replace it with a small select dialog in that
same style: "Quit and disconnect" is the highlighted default so Enter leaves,
while Esc — or choosing "Stay" — returns to the menu.
select() grows optional filterable/footer_hint passthroughs so this short,
fixed choice skips type-to-filter and shows a tailored "Enter quit · Esc stay"
hint.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The app sometimes hung on exit. The device/async teardown is clean; the
culprit is prompt_toolkit's Windows input reader, which runs on a
non-daemon executor thread blocked in a Win32 wait. In a rare teardown
race that thread stays blocked and the interpreter's atexit thread joins
hang the process after cleanup is already done.
Arm a daemon watchdog once the user commits to quitting: if a clean exit
doesn't complete within a grace period it flushes and os._exit(0)s. A
daemon thread still runs while the main thread is stuck in that join, so
it always terminates. The happy path is untouched (the process is gone
before the timer fires) and committed DB writes are durable regardless.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rework the startup device picker into a self-contained splash flow:
- probe_meshcore (renamed from smoke_test_meshcore) now leaves the confirmed
connection open and returns it, so AppContext.adopt_device reuses that live
radio instead of reopening (many boards reset on each serial open). Restore
the library's normal per-command timeout once the handshake succeeds.
- Extract the Braille animation into a reusable tui.Spinner; BusyScreen now
delegates to it.
- Pin the wordmark to a fixed vertical anchor so it never shifts as the box
swaps between the device list, spinner, and messages.
- Esc or a trailing Quit row leaves the splash and exits the program.
- Show the copyright only on the opening splash; retire it once a device is
chosen, even across a failed smoke test and re-pick.
- Disable prompt_toolkit's loop exception handler and route asyncio (and the
awaited spinner ticker) errors to the file log, so a stray background-task
error can't dump a traceback over the full-screen UI.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Reserve the "MeshCore device" tag for hardware we have actually talked to,
rather than guessing from the USB vendor ID:
- DeviceStore now keeps a registry of every confirmed device (keyed by
stable serial id), remembered forever, migrating the old single-record
file transparently.
- Selecting a device on the splash runs an immediate smoke test
(smoke_test_meshcore): a genuine companion is remembered and confirmed;
anything else re-prompts with a message to choose another. The probe uses
a short handshake window so a non-MeshCore port is rejected cleanly in a
few seconds instead of blocking on meshcore's full default timeout.
- The probe renders in place on the chromeless splash via a new BusyScreen
(animated Braille spinner) driven by session.busy_startup, so the wordmark
and box stay put instead of a separate progress dialog.
- Silence the meshcore library's console logging (its import calls
logging.basicConfig, which printed "INFO:meshcore:..." over the TUI):
route it to the JSON-lines file log with a NullHandler guard on root.
- The devices tool now marks confirmed devices and stops asserting "LoRa"
before a device is proven.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>