MeshTerm runs the same on the Cardputer Zero (C154) and the Cardputer Zero
Lite (C155): the Lite only leaves out a camera, motion sensors, and the
microSD card, none of which MeshTerm uses. The device manual, the README,
the manuals index, and the About page now say that both models are supported,
and the manual says that the Lite needs a card with M5Stack's system first.
M5Stack does not support hot-swapping a Cap on the Cardputer Zero, the Cap
LoRa-1262 included, and says that it may cause the device to malfunction.
The manual now puts that caution before its steps for the Cap, with M5Stack's
other caution (the antenna goes on before the power), and the steps turn the
handheld off first. It also says that MeshTerm switching the header off when
it quits does not make a Cap safe to remove. The About page says the same in
its own voice, and gains a section on the Cardputer Zero next to the uConsole
and the PicoCalc.
The README shows the Cardputer Zero's start screen (the store's capture,
three times its size) under the PicoCalc photo, and its quick start shows the
emulator command. The pip commands with the spi extra install from GitHub,
because mesh-term is not on PyPI yet. The platform comment and CLAUDE.md no
longer say that the hardware is not in hand: only a flag selects the platform
because the device-tree model is the CM0's generic string.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A final pass over the docstrings and comments: "the own X of Y" is now
"Y's own X" (84 places), a navigation entry is a screen on the stack, our
node is our node, a paint is a paint, the quoted UX labels are in code
font, and a list of punctuation glyphs is in code font.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
cli.py, context.py, platforms.py, and __main__.py. The package
docstring (the fixed description of MeshTerm) does not change.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Tried on a real Cardputer Zero for the first time. It draws on the
panel, takes the keyboard, and opens from M5's app launcher:
scripts/cardputer-zero/launcher-entry.sh puts a source checkout there
(and `remove` takes it off) until there is a store package.
Three things the hardware showed:
- The splash opened with the highlight on /dev/ttyS0, the Cap's GPS
UART, because serial is listed first as found. Below the companions
we've used, anything that looks like one now comes before a port
nothing vouches for, across transports.
- The title bar's battery is the handheld's own BQ27220, as the
PicoCalc's is. The host pack is now found by what it is (a Battery
supply that isn't a peripheral's), not by the PicoCalc's name.
- While the Cap is powered, I2C bus 1 turns noisy: a quarter to three
quarters of the gauge's reads fail with an I/O error (one in ten of
the clock's), none with the header off. A failed read is asked again,
a status that won't read keeps its last verdict, and a good reading
stands through six failed polls instead of blinking out.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A full T1000-E read 9 or 10% in the header on Ubuntu, while the radio
reported 4.21 V. The battery was never the fault. A full pack's "100"
lost its last zero, and 99% lost its 9 to the % sign that followed it.
MeshTerm adds one column to the width the terminal reports, because
prompt_toolkit's Windows console output reports one column fewer than
the window has, on purpose. That was done on every desktop, but a Linux
or macOS terminal reports its width exactly. There the extra column fell
off the screen. prompt_toolkit draws with autowrap off, so each row's
last character landed on top of the one before it, and whatever sat
flush right lost its end. The battery gauge sits flush right.
The column is now added only where the terminal hid one, which is the
Windows console. The full_width preference and MESHTERM_FULL_WIDTH still
override either way. Driven into an exact 80-column terminal under
--mock, the header now ends "100" at 4.21 V and "98%" at 4.18 V, where
it ended "10" and "9%". In a real Windows console the reported 119
columns still widen to 120.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`meshterm emulate cardputer-zero --mock` and `meshterm emulate picocalc-lyra --mock`
open a desktop window drawing MeshTerm as that device's own screen draws it. An
EmulatedDevice (emulator/devices.py) holds what differs per handheld: the panel, a
Linux console's top-left grid and bold-as-bright 4-bit palette for the PicoCalc, the
lane keys drawn under the Cardputer's panel, and how each keyboard spells Shift with
an F-key (the PicoCalc's F6-F10, the Cardputer's xterm-shifted F4-F8).
It is not a strict emulator, and the docs say so wherever they offer it: MeshTerm runs
on the desktop as itself, and the window mimics the display's and keyboard's
constraints, never the CPU or the OS. Inside it the platform resolves with own_display
(platforms.drawn_by_meshterm), so nothing offers to move to another terminal.
Global options typed anywhere (--mock, --port, --db...) reach the emulated MeshTerm.
The command refuses --json like specimen. The Terminus fetch moved into the package as
`meshterm emulate --fetch-fonts` (with --archive for a copy fetched another way),
replacing scripts/cardputer-zero/fetch-terminus.py. A build without Tk says to install
with pip or pipx instead of failing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
"Host" already meant two things here: a TCP companion's network host,
and battery="host" for this machine itself. And with a PicoCalc preview
coming, the package is less a console host than an emulator of a
handheld's display: its panel, grid, font, colours and keys. So it is
meshterm.emulator, Platform.console_host is own_display, its desktop
window is window.py (EmulatorWindow) and its device front end
framebuffer.py, since "sim" and "device" now mean the radio simulator and
the device being emulated. MESHTERM_HOST_FONTS is MESHTERM_EMULATOR_FONTS.
The package's own description opens on what it is not: nothing runs the
handheld's processor or operating system; it mimics the display's
constraints so the window obeys the device's.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
M5Stack makes three Cardputers and only the Zero runs Linux; the PicoCalc
takes several cores and only the Luckfox Lyra runs MeshTerm. So the bare
names were ambiguous, and every reference to the two devices now carries
the variant: the --platform values and MESHTERM_PLATFORM, the Platform
constants (PICOCALC_LYRA, CARDPUTER_ZERO), their lane decks and every
screen's picocalc_lyra_lane / cardputer_zero_lane, the font inventories,
the lane chips' theme styles, the scripts/ folders, the two chrome test
files, and the docs and CLAUDE.md that name them.
There is no alias: --platform picocalc is refused with the three real
choices listed, rather than falling back to the desktop layout. The
PicoCalc is auto-detected from its device tree, so it needs nothing.
What names hardware or a user's data keeps its name: the PicoCalc
keyboard's input-device name, its battery's sysfs supply, and the serial
profile the Lyra setup script writes. .gitignore follows the firmware's
folder, and the changelog keeps the words each release used.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
CLAUDE.md and the platform's own comment still said the port lived on the
cardputer-zero branch. It is merged; the hardware is what is still to come.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The Cardputer's 14 rows had a whole one spent on the header. It has no
header row now: its unread and Watchtower badges and the battery ride the
title bar's right end, after the way out, so they sit in the top-right
corner they always had, one row up, and every screen gets that row back.
The way out gives way first and then the title, never the status. The
wordmark moves to the main menu's title, in the header's own colours, and
the activity pulse goes; the dashboard draws the mesh's activity in full.
A tall dialog now draws over the bar, eleven rows instead of ten, but
never over the lane, which is the dialog's own and names keys nowhere
else. Where a box covers the bar, the bar's ends either side of it are
blanked, since a stray "7%" beside the box would read as the battery.
JP chose the corner placement and the dialog height from rendered
mockups. The PicoCalc and the desktop are unchanged.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Every URL in a channel or direct message, any scheme (a meshcore://
share as surely as a web link), now gets a braille code under the
message, hung at the body's indent. Several sit side by side and wrap
onto a new band when the line is full, so a link read on the handheld
opens on a phone instead of being typed out. Platform.url_codes keeps
it to the PicoCalc: half-block codes would swamp a desktop transcript,
and the Cardputer's 14 rows can't spare 9 under every link.
A picked message now keeps its whole block in view, codes included,
rather than only its first row, so walking the pick down onto a link
no longer leaves its code below the fold.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The console host now draws every braille cell over Terminus's dotted
ones as solid 3x3 tiles, the same tiles as the PicoCalc's font build,
so the map and the charts draw unbroken lines and Platform.solid_braille
holds here too. Every QR code is then braille, one module a dot: the
share screen fits the 14-row frame instead of being cut, a channel
share with its link under it, a contact card with its link a page down.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Braille was a fallback for codes too big for half blocks; on the
PicoCalc it is now the grid every code is drawn on, eight modules to a
cell, share screens and page fences alike. A channel share is 23 cells
by 12 rows there, a contact card 29 by 15, each with its link under it.
The regular platform keeps half blocks, its fonts' braille being dotted.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Now that the PicoCalc's fonts draw braille as solid tiles, a braille
cell is a true 2x4 pixel grid, so it can hold a QR code at half the
module size. The fit ladder tries every half-block fit first (a lighter
error level and a narrower quiet zone cost a camera nothing on a
screen), then the same fits in braille. That puts the contact card on
the 53x26 panel whole: the standard code in 29 cells by 15 rows, with
its link under it, where half blocks had to send the link a page down.
Platform.solid_braille says where braille is solid; desktop fonts draw
it dotted, so the regular platform never offers it. Codes are cached
per (data, error level) since the share screen refits every paint.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The row of air a floating box keeps above and below is a platform setting now,
like its side gutters. At 24 rows it is what makes a box read as floating; at the
Cardputer's 14 it was a fifth of what a dialog could show, and the gutters already
say it floats, so its dialogs get ten rows between their borders instead of eight.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The stock image gives an app no text console, so MeshTerm draws its own: the TUI
runs in-process with prompt_toolkit's output feeding a small VT parser, the cells
are drawn in Terminus 6x12 with MeshTerm's marks over it, and keys go in through a
pipe in xterm's spelling. The front end is the only part that differs: framebuffer
and evdev on the device (written ahead of the hardware), a Tk window on the desktop.
Each handheld's glyph inventory is now named by Platform.font, which replaces
ascii_fold; the render-boundary fold derives its accents, emoji, and fallback from
that inventory and quantizes colour only where truecolor is off.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A lane's keyboard-bound half is now a LaneDeck named by Platform.lane_deck: which
keycodes drive the slots, where the chips sit, how they are drawn, and which of a
screen's lane definitions it reads. Screens define picocalc_lane; cardputer_lane
follows it until a screen overrides it, so the two can part ways one screen at a
time. The Cardputer deck is Fn+4..8, Shift with them as F16-F20, eight-cell chips
centred over their keys in the fn key's orange-red and the Shift blue.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
The curated narrow and wide sets are gone, with the probe that decided when
to apply them and the add-narrow-emoji skill that fed them. They lined up
the rows somebody had already looked at and none of the rows nobody had,
and a contact's name arrives off the air carrying whatever its owner typed.
In their place, one structural rule: a glyph built from several codepoints
(a selector sequence, a ZWJ sequence, a keycap, a flag) or a lone
text-default emoji or Regional Indicator is reserved two cells, the most a
single glyph draws. Pinned into two cells, a glyph the font draws in two
fills them and one it draws in one leaves a blank beside it, so the text
after any emoji starts in the same column on every row. Pinning alone could
only hold the lanes after it.
Two exceptions keep their one cell: Rich's single-cell ranges, which its
fast path measures without asking, and the nine text-default emoji the app
draws itself as marks. That list is closed by a test over the package's
source, so a new mark cannot slip into the reserve unnoticed.
Rich measures in three places and prompt_toolkit in a fourth, and all four
are patched from the same rule at once: Rich's segment splitter walks a
string until a whole-string width meets its cut, and a character measured
differently from the string around it is a cut that walk never meets. Every
multi-codepoint glyph is also merged into one fragment before layout, so a
mark followed by a selector is not folded into a one-cell slot.
Installed only by the full-screen app on a platform that draws emoji. The
command line keeps the stock tables, because nothing pins its output.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Apache-2.0 does not require per-file headers, but a file lifted out of the tree carried no marking at all. One comment line, first (or right after a shebang), on every .py under meshterm/, tests/, packaging/ and scripts/, plus the extensionless SPI bridge; tests/test_spdx.py keeps a new file from landing without one.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The classic Windows console renders through GDI with the console font and no
emoji font behind it, so every icon in the menu came up as a replacement box.
It is what a double-clicked build gets, which is most of the Windows audience.
The fix already existed: the compact single-character glyph table built for the
PicoCalc, reached by Platform.emoji. The seam's flags are independent, so
clearing that one alone keeps the desktop's width, colour and accented names and
moves only the icons — without_emoji() is the whole change to the platform.
Identifying the host has to be structural. It cannot be asked in band, because a
missing glyph still fills its cell: a classic console stores an emoji intact and
advances two cells while showing a box, and a ConPTY reads back as U+FFFD while
drawing it perfectly, so a write-and-read-back probe answers both hosts
backwards. Nor can the environment answer, since WT_SESSION is inherited across
process launches. So two independent facts must agree — the console font has a
real pixel width (a ConPTY's hidden conhost reports zero) and the buffer is
taller than its window (a ConPTY has no scrollback of its own) — and an unknown
never degrades anything. MESHTERM_EMOJI overrides either way, and
`meshterm platform` reports the verdict and its reason.
Verified on Windows 10 22H2 in all three: a real conhost turns the icons
compact, Windows Terminal keeps its emoji, a redirected run is left alone.
_has_wide_glyph asked the same flag to mean "nothing here is two cells wide",
which was true of the PicoCalc's fixed font rather than of the flag. A console
that merely lacks emoji still renders the rest of the BMP, and a contact named
in CJK is two cells wide there like anywhere else, so it now asks ascii_fold —
the fold is what actually guarantees it.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`ruff format .` across the repo: 153 files, no behaviour change. This is the
second gate CONTRIBUTING.md promises, and until now it reported 154 files needing
reformat — so a first contributor ran the command the guide told them to run and
could not tell their own diff from the background.
Landed on its own, with nothing else in it, because a whole-repo reformat is only
safe to skip past in blame if it is provably nothing but layout. It was checked
that way rather than assumed: every changed file was formatted in memory and
compared by full `ast.dump()`, and 152 of 153 come out structurally identical
(the one exception was a docstring opening on a quote character, fixed in the
commit before this one). The string and comment token streams were diffed
separately, so a quote flip or an edited comment could not hide inside a
re-layout — five quote-style normalisations and sixteen implicit-concatenation
joins, all value-identical, and one commented-out line gaining the space after
its `#`. `meshterm specimen` is byte-identical on both platforms, and the suite
is 1888 green, gallery gate and `test_theme16` included.
What actually changed, in order of how much of the diff it is: wrapped calls and
signatures rejoin onto one line where they fit inside the hundred columns; the
magic trailing comma expands what it is there to expand; complex slices gain
their spaces (`[len(noise) :]`); a few redundant parens go. The tables that are
laid out to be read were fenced in the previous commit and are untouched here.
The aligned trailing-comment column is gone from about ninety lanes that were not
fenced — including the `heat.*` ladder in `MESH_THEME`, which cannot be fenced
where it sits. Every comment stays on the entry it describes, so nothing there
reads wrong; it just no longer lines up.
Add this commit to `.git-blame-ignore-revs`, which follows immediately.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`ruff check --fix` over the whole tree, ahead of putting the linter in CI:
1977 mechanical fixes, overwhelmingly `Optional[X]` → `X | None` (1186 in the
package alone) and the quoted annotations that `from __future__ import
annotations` already made unnecessary, plus import sorting and unused imports.
Nothing here changes behaviour — the suite is 1885 green before and after.
Four findings were real rather than stylistic and are fixed by hand: a dead
`cells` range in `MapCanvas`, a dead slot dict in the heat-ladder test, a
`ProgressScreen` task handle nobody read, and a tab loop binding a `label` it
never used. The two `F821`s were quoted forward references to names imported
inside their function bodies — now declared under `TYPE_CHECKING`, which keeps
`test_performance`'s local import (it guards the startup import graph) while
letting the linter resolve the name.
412 findings remain and are deliberately untouched: they need a decision about
the rule, not an edit to the code.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
.claude/plans/ and housekeeping.md were internal planning — phase worklists,
hardware addresses, unshipped ideas — tracked alongside the code they planned.
They stop being tracked here, and .gitignore keeps them from coming back.
The three source comments that cited .claude/plans/picocalc-platform.md now say
what they mean on their own: a pointer into a file the reader cannot open is
worse than no pointer.
housekeeping.md is deleted outright; it will be replaced with something better.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
One braille cell was four coarse levels lit in one colour. It is now a
filled block whose two channels answer two different questions.
Colour answers "roughly how much" from across the room: a lit
foreground over its own darker ground of the same hue — light green on
green over half, yellow on brown over a quarter, light red on red
below. The braille fill inside the block answers "exactly how much" on
a second look: each dot row lights left before right, so one cell
carries eight rungs, one per 12.5% of charge. The band holds still
while the dots climb through it, which is what keeps the two readable
as two.
The charging sweep keeps its five whole-row frames and does not colour
itself — a frame of an animation is not a reading, so the band goes on
answering for the real charge underneath it, exactly as the number
beside it does.
That leaves the alarm nothing to say in hue, so it says it in ground:
under 6.25% — half the last dot's worth of charge — the cell alternates
black dots on red with the light red on the bare page. Where every
other cell is filled, a beat with no fill at all is the loudest thing
the palette has. It is drawn a frame at a time because a terminal's own
blink only ever toggles the foreground, and the PicoCalc's framebuffer
console ignores SGR 5 outright — device-checked, along with its want of
bright backgrounds, which is why the grounds are all dim-bank slots.
Neither animation sits behind Platform.effects any more. The header is
rebuilt on the idle tick regardless, so both cost a colour swap in a
frame already being painted, and the one platform the alarm is *for*
was the one platform never drawing it. effects keeps the braille
spinner, which is what it was really gating.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every framed box was post-processed on the way to the screen: the top-left
corner blended toward white and the highlight decayed along the top and left
edges, so a box read as lit from that corner. It reads as a gradient laid over
the chrome rather than as the box being a box. The borders draw flat now.
The pass goes with it — ui/tui/glow.py, and the three composers that ran it
(base, startup, dialog), each of which also carried the platform gate that kept
it off the 16-slot console where it could only ever hand back the same lines.
Nothing else called it, and its memo went with the module. Text colour is
untouched: the pass only ever recoloured box-drawing glyphs, and titles and
subtitles were already skipped.
The four glow tests become one that pins the outcome instead of the mechanism —
every box glyph in a composed frame, nested panels and dialogs included, carries
the border's own colour and no other. Verified against the old pass: with it
back, that set holds sixty-five.
Platform.effects keeps its other two claims (the header blink, the braille
spinner); it just no longer mentions a pass that no longer exists.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every icon on the console is a one-glyph stand-in for an emoji, and the
menu is where that pinches hardest: the main menu drew @ for both Map and
Mesh walk, … for both Live feed and Time machine, and ?? for Trace path,
in a lane costing three of fifty-three columns on every row (JP,
on-device).
So drop the lane there, mark and emoji alike. A command row's icon is
decoration — it names the action's family while the label names the
action — so where it can only be approximated it is worth less than the
cells it takes, and the label and its description get them back. This is
a platform choice (Platform.menu_icons), not a per-emoji one: a glyph
that carries *data* is not an icon in this sense and never goes, which is
why the Channels page keeps its #/🌐/🔒 openness mark, the feed keeps the
class icon it shows in place of the class word at 53 columns, and node
types, status marks and the mute mark in the channel lane all stay put.
Three funnels do the work, so a screen never asks the platform itself:
command_label for a label carrying its own icon, command_icon for a row
that builds its own lane, and marked_label where the icon carried a tint
— a delete row's red moves onto its words rather than leaving with the 🗑.
Section headings go through the same cut (a stand-in beside the ── rule
is pure noise), which also retires the ?? that No revisits was drawing.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
On the PicoCalc the viewer's reception row folded the bare word "rssi"
onto a line of its own. Two things were spending the cells it needed.
The dialog gutter: every floating box left six columns to the backdrop it
sits over. Three a side reads as floating at 72; at 53 the same gutter is
a twelfth of the whole display, and it costs content. How wide the gutter
is worth being is now the platform's call (Platform.dialog_margin), and
the console's is four — still floating, two columns back.
The separator: the row chained its two atoms on the roomy " · " no
matter the lane. That is the header's problem too, and the header already
solved it — roomy by default, compact when the cells run out — so the row
now takes the same trade, sizing itself at render time like the via path
beside it. Two cells alone would have left a two-digit SNR beside a
three-digit RSSI still folding; together they fit with a cell to spare.
The roomy/compact pair moves to ui/menus.py, one definition for both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A platform's ceiling may change a rule's resolution, never the rule. P3
had picocalc colour node names by *type* instead of by key, so a name's
colour there meant something different than it does on the desktop — the
node's kind, not its identity. Both platforms now run one rule: the key's
first byte picks the hue. The console just spends fewer of them.
node_style gains the binding the heat scale already had. Regular keeps
the full 256-hue wheel; picocalc snaps the same hue to its sixth of it —
the six chromatic bright slots, ~43 first bytes each. It returns the
slot's own hex rather than a color(N), so every downsample on the way out
(Rich's, and the fold's quantizer) lands on that exact slot instead of
guessing a neighbour, and the callers that read an RGB back out of a
style string keep working.
The type marks needed the opposite treatment: their hues are fixed, not
derived, and a naive nearest-RGB match drained the repeater's violet to
grey — a repeater read as an unknown node. They move to the theme's
type.* entries so each platform picks its slot deliberately, and a
braille raster resolves the same entry through theme.mark_rgb, so the
canvas marker and its Rich-drawn twin can't drift.
With names off the type registry, nothing reads it: Platform.name_colour
and core/nodetypes.py go, along with the three reception-layer feeders.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The console keeps its stock kernel palette - black background, classic
PC hues - instead of the custom setvtrgb remap. MESH_THEME_16 is
re-tuned against the stock slots, which hands back the map's own
language for free: clients wear bright pink (13), repeaters purple (5),
rooms cyan (6), sensors brown (3). The cost is one dark grey - muted,
faint and track all collapse onto slot 8. Heat quantizes on plain human
units (15 min / 1 h / 1 day). The custom design is archived, not
deleted: theme._VT_SLOTS_CUSTOM + MESHTERM_CUSTOM_PALETTE=1 on the font
script reinstalls it, with the parity test keeping the two in sync.
Undoing the remap on the device exposed a trap: setvtrgb overwrites the
kernel's DEFAULT colormap, so the OSC palette-reset "resets" straight
back to the custom values - the script's default mode now programs the
stock palette explicitly (verified live; specimen screenshot in
.claude/plans/p3-specimen-stock.png).
The header also follows JP's spec: the handheld brands the app -
"MeshTerm vX" - instead of naming a soldered port that never changes,
and the activity pulse takes whatever room remains.
Also root-causes the intermittent suite flake: Rich memoizes a parsed
Style's ANSI codes on first render (Style.parse is globally cached), so
a raw hex style first rendered by a truecolor console replays 38;2
verbatim on a standard console later in the process. The specimen's
nodes row now wears the type.* theme styles - which is also just
correct: the marks now match the names row. Six consecutive clean
full-suite runs.
Deferred at JP's request: the glyph substitution map (he will redo it),
the F-key lane design (awaits his explicit spec), the CLI fold gap.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The first P3 (a84abf3) ran on the wrong model and its palette never
reached the TUI: MESH_THEME_16 was written in 256-colour cube indices
instead of the 16 VT slots, and the platform theme pick was wired into
the scripted-CLI console while the real rasterizer stayed hardcoded to
truecolor. Replace it end to end:
- theme._VT_SLOTS: the canonical slot->RGB design (conventional hue
families kept; slots 5/6 become the track/faint slates), MESH_THEME_16
rewritten against color(0..15) with the VT's bold-as-brightness and
dim-bank-background rules pinned by tests. /etc/vtrgb + a boot oneshot
install it (console-font script), OSC fallback when kbd is absent.
- platforms.on_platform: set_platform now re-runs registered bindings,
so theme, rasterizer and widgets swap implementations once per switch
and hot paths read module globals - no per-call get_platform().
- The render-boundary fold (theme.fold_text): one str.translate pass
(NFKD accent folds - the Terminus base has no accented Latin - plus
symbol stand-ins and the width-padded emoji map), an embedded-SGR
quantizer for canvas truecolor, and a ?-at-own-width catch-all that
makes the no-wide-glyph short-circuit true by construction. Applied at
the only two places every visible byte passes: render_to_ansi and
MapCanvas.to_ansi_lines.
- ui/fontset.py freezes the installed font's inventory (dumped live);
the gallery now asserts rendered picocalc ANSI carries no truecolor/
256-colour SGR and no character outside it - the parity gate the
first attempt faked by asserting a dataclass field.
- Font build: nine new 6x12 marks (ellipsis, warn, backspace, shift,
gear, refresh, clock, crosshair, padlock) drawn into donor slots, with
donor misses now fatal and a keeper canary (donating pi once erased
Cyrillic pe - shared slot). Table re-dumped on-device: identical to
fontset.py, 519 = 519.
- Type-based name colouring: registry moved to core/nodetypes (services
no longer import ui), fed from monitor observations, heard_nodes and
merge_contacts. Heat gradient quantizes to heat.* steps on picocalc.
- ui/marks.py: the P2-deferred constant relocation - widgets no longer
drags map_render/mapcanvas/pathgraph for tuples and aliases.
- meshterm specimen: the visual language on one card through the real
funnels - the on-device acceptance screen (JP's request).
- tools/chat: delivered/no-ack state uses the standard check/query
marks, not the banned emoji pair.
Verified on the Lyra: font+palette installed, specimen framebuffer
captures in .claude/plans/. 1259 tests green, 13 xfailed (P6 list).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
PicoCalc plan phase P2, driven by measurements taken on the Lyra as a
paired A/B (git archive HEAD vs the working tree, run side by side
against the same venv).
The headline is the database. Every packet the monitor hears is one
durable commit, and on the SD card each was costing 33.78 ms of fsync.
db._tune() opens in WAL with temp_store=MEMORY: 0.59 ms per commit, a
54x cut. synchronous=NORMAL is requested only once WAL is confirmed
engaged - the pragma returns the mode it settled on rather than raising
when a filesystem refuses it - because under WAL it risks the last
transactions to a power cut, and under the rollback journal it risks the
file itself. This device runs on a battery pack.
Startup: bleak/dbus-fast were already lazy; the real finds were two
cheap *values* dragging heavy subtrees. core/connection.py imports one
constant from core/channels.py, which imported PyCryptodome at module
level (224 ms of CPU-feature probing per run) - now deferred into the
two functions that decrypt. And tools/map.py's register_cli, which runs
for every tool at boot, reached into ui/map_screen.py for a --fraction
default, dragging the basemap's urllib.request -> http.client -> ssl
behind it; DEFAULT_VIEW_FRACTION moves to core/geo.py (pure arithmetic,
already on the boot path) and is re-exported so existing importers are
untouched. 26 modules and 316 ms of import self-time gone.
Per-frame: the corner glow only ever recolours truecolor foregrounds, so
on a 16-slot console it scanned every line of every frame to hand back
the identical list - skipped outright where effects are off, along with
the battery blink and the braille spinner cycle. _has_wide_glyph answers
from the platform when no emoji can be drawn instead of scanning the
composed frame (6.5-9.1 ms per repaint on its own). The header built its
segments twice to measure the compact separator, on exactly the narrow
terminals that take that branch every frame; it now builds once and
measures arithmetically. Together: 101.2 -> 73.2 ms per frame at 53x26,
151.8 -> 110.4 at 53x40, and 72x24 unregressed at 91.7.
That finally gave numbers to set the clocks against. refresh_interval
becomes per-platform tick_s (2.0 s on picocalc: a 1 Hz idle tick alone
was 7-11% of a core doing nothing, and only the header's per-minute
pulse drifts, since screens push their own repaints via invalidate).
The 0.12 s spinner was untenable - 84% of a core at 53x26, and at 53x40
it did not fit in its own interval at all. Five duplicate
_SPINNER_INTERVAL = 0.12 constants across the UI collapse into one
platform-aware spinner_interval() beside the Spinner it paces.
The header refactor was verified equivalent over 540 renders, plain text
and style spans both. The span check earned its keep: the first cut
passed style= to the Text constructor, which makes it the object's base
style and blankets everything appended after, so the version string
would have rendered brand-under-muted. test_header.py only asserted on
.plain and never saw it; it now pins the styling too.
tests/test_performance.py pins each contract as behaviour rather than
timing, including a subprocess guard that fails if Crypto, the network
stack, or the map screen ever creep back onto the startup import graph.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
One frozen Platform spec (REGULAR/PICOCALC), resolved once at boot
(--platform flag > MESHTERM_PLATFORM env > /proc/device-tree/model
auto-detect > REGULAR) and read via get_platform()/set_platform() -
never a stale `from platforms import PLATFORM`, which the module
docstring calls out. `meshterm platform` reports the resolution and
everything it looked at.
Wires the two correctness bindings that matter before any flavour
work lands: width_reclaim off on PicoCalc's exact-width console
(session._reclaim_last_column, env override still wins), and the
emoji-width calibration probe skipped outright when a platform never
draws emoji.
tests/test_gallery.py renders all 16 screens the interactive menu
opens against REGULAR (72x24) and PICOCALC (53x26 live floor, 53x40
lux case), asserting no line overflows its platform - 35 passing
cases, 13 xfailed as a real P6 worklist (contacts, map, walk,
livefeed, remote_cli, path_composer). Also caught and left alone: the
map screen's footer hint already overflowed the *existing* 72-col
standard before this seam existed, unrelated to picocalc - xfailed
rather than fixed as a drive-by. tests/test_platforms.py unit-tests
the module directly; conftest.py gained an autouse fixture resetting
the platform between tests.
Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>