Backing out of a thread already landed on the picker rather than the menu, but
on a brand-new one: the tool re-ran the whole picker each round and put the
cursor back with a default= restore, which recovers the cursor alone and only
while the row it names still exists. Anything typed to narrow the list was gone
every time, and the screen was rebuilt around two devstate reads.
The picker moves into the tool's own loop and stays pushed, so a chat nests
above it and Esc is one pop onto the row it was opened from — filter, scroll and
all. The row builder splits out as _picker_items, and the rows are swapped in
place after every chat and every delete: an exchange moves its thread up the
recency order and a deleted history hollows its dot and demotes the row, so the
list has to be re-read, and replace_items follows the highlighted thread there.
The picker tests now read _picker_items directly rather than intercepting a
select() call, and the two Del tests drive _delete_history and assert the
rebuilt row demotes — the same coverage, one layer down from the loop.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The app-wide Back row existed because it duplicated Esc — two of its call
sites said as much in a comment. On both platforms Esc is a labelled key
and every footer hint names it, so the row bought nothing for the blank
separator and line it took out of every screen; on the PicoCalc's 26 rows
that is a row in thirteen.
back_rows() is gone, and with it the four hand-drawn copies: ReorderScreen's
clean-state row, the live feed's pinned foot stop (the cursor now clamps on
the oldest packet), node detail's tail action, and the action-list rows on
the trace and TX-sweep screens.
Kept, because there leaving is a choice rather than an exit — the same rule
that keeps a dialog's Cancel button: exit_rows()' staged pair, where Apply
has no key of its own and ✗ Back names what the other way out costs;
ReorderScreen's dirty-state pair; the two Quit rows, which initiate the
app's terminal action behind a confirm; and the new-record dialog's Close,
which is its default, so dropping it would let a reflex Enter navigate.
With no Back row there is no Back value: the six spellings callers used to
test three at a time (_BACK, "__back__", _CANCEL, two tuple shapes, bare
None) collapse to `is CANCEL` / `is None`. The gallery now asserts the
absence of an exit row on every screen, on both platforms.
Resolves findings E and §10 of docs/survey-navigation.md. Finding D — Esc
peeling a filter on three screens and leaving on two — still stands, and is
now the only thing left telling a user what Esc does.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The label column is the widest tool title plus two cells of gap, which
leaves the muted description 47 to work in. All 22 of them ran past it —
"Act on the device itself — clock, backup, identity key, reboot, reset"
needed 94 columns of terminal to say what 67 could. The row scrolled
under ←→ rather than lying, but a description you have to scroll is a
description nobody reads.
Rewritten to fit: the subject moves into the title's shadow (the row
already says Device actions, so the description just lists them), the
parenthetical asides go, and the trailing clause that repeated the
obvious goes with them. Widest row is now exactly 72.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The menu asks "What would you like to do?" and then grouped its rows by
subject, which is not an answer to that. Mesh had grown to seven of the
nineteen rows — live watching, passive browsing, and one transmit action
in the same bucket — and Tools said nothing at all, since everything in
the menu is a tool.
So each section now names a doing, and holds what shares it:
Message Chat · Channels · Courier · Contacts
Watch Dashboard · Live feed · Watchtower · Time machine
Explore Map · Mesh walk · Trace target · Trace path · Trophy case
This node Device info · Device configuration · Device actions · Send advert
Other nodes Repeater admin · TX optimize
Four rows moved for a reason. Contacts is the address book the three
features above it pick a recipient from, not a mesh view. Time machine is
the past tense of the Dashboard, and was stranded in the grab-bag. Send
advert is your own node announcing itself — a device action, filed with
the mesh views only because it was about the mesh. And Repeater admin and
TX optimize are the same job — someone else's radio, over the mesh, with
credentials — which the old Device-management/Tools split hid.
The two walks join the topology views they walk over, with the boards
that score them underneath: see a node, walk to it, get scored. Nothing
is renamed (a menu row still names the screen it opens) and no section is
now larger than five rows or smaller than two.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The first P3 (a84abf3) ran on the wrong model and its palette never
reached the TUI: MESH_THEME_16 was written in 256-colour cube indices
instead of the 16 VT slots, and the platform theme pick was wired into
the scripted-CLI console while the real rasterizer stayed hardcoded to
truecolor. Replace it end to end:
- theme._VT_SLOTS: the canonical slot->RGB design (conventional hue
families kept; slots 5/6 become the track/faint slates), MESH_THEME_16
rewritten against color(0..15) with the VT's bold-as-brightness and
dim-bank-background rules pinned by tests. /etc/vtrgb + a boot oneshot
install it (console-font script), OSC fallback when kbd is absent.
- platforms.on_platform: set_platform now re-runs registered bindings,
so theme, rasterizer and widgets swap implementations once per switch
and hot paths read module globals - no per-call get_platform().
- The render-boundary fold (theme.fold_text): one str.translate pass
(NFKD accent folds - the Terminus base has no accented Latin - plus
symbol stand-ins and the width-padded emoji map), an embedded-SGR
quantizer for canvas truecolor, and a ?-at-own-width catch-all that
makes the no-wide-glyph short-circuit true by construction. Applied at
the only two places every visible byte passes: render_to_ansi and
MapCanvas.to_ansi_lines.
- ui/fontset.py freezes the installed font's inventory (dumped live);
the gallery now asserts rendered picocalc ANSI carries no truecolor/
256-colour SGR and no character outside it - the parity gate the
first attempt faked by asserting a dataclass field.
- Font build: nine new 6x12 marks (ellipsis, warn, backspace, shift,
gear, refresh, clock, crosshair, padlock) drawn into donor slots, with
donor misses now fatal and a keeper canary (donating pi once erased
Cyrillic pe - shared slot). Table re-dumped on-device: identical to
fontset.py, 519 = 519.
- Type-based name colouring: registry moved to core/nodetypes (services
no longer import ui), fed from monitor observations, heard_nodes and
merge_contacts. Heat gradient quantizes to heat.* steps on picocalc.
- ui/marks.py: the P2-deferred constant relocation - widgets no longer
drags map_render/mapcanvas/pathgraph for tuples and aliases.
- meshterm specimen: the visual language on one card through the real
funnels - the on-device acceptance screen (JP's request).
- tools/chat: delivered/no-ack state uses the standard check/query
marks, not the banned emoji pair.
Verified on the Lyra: font+palette installed, specimen framebuffer
captures in .claude/plans/. 1259 tests green, 13 xfailed (P6 list).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
tools/chat._ago carried its own copy of the now/5m/3h/2d/4w ladder plus
an inline _age_seconds; _format_age is THE column age widget, so change
the ladder once and every surface follows. The picker keeps its one real
difference — a naive timestamp reads as a blank lane, not "never" —
and now says so (housekeeping H-002).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The chat picker and the TX-optimize target picker appended their own
Separator + Back rows; back_rows is the enforcement point that keeps the
exit language from drifting (housekeeping H-004).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The chat picker's no-contacts line and the CLI's no-serial-devices line
were the last two wearing parentheses; the standard shape is bare prose
with an em-dash explanation (housekeeping H-005).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The listen summary said "stopped — saw n messages"; heard is the app's
word for having received something (housekeeping H-006).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two things a grouped list has to keep in view while it scrolls, and neither one
was staying: the lane names that read every row, and the heading that says which
group a row belongs to.
The lanes come first. A column header means the same thing in every section, so
it is not a section landmark at all — it pins for the *whole* list, above any
heading, once it scrolls off (`Separator(pinned=True)`). It is drawn outside the
body slice, so it stays exactly one row: too wide for the terminal it ellipsizes
rather than wrapping and stealing a second reserved row from the content. And it
can now size itself — a Separator title may be a callable taking the render
width — so `column_header`/`Lane` lay each label over its own lane and hand back
the shorter form (DESCRIPTION → DESC) only for the lanes that actually overrun,
from the right, where the trailing lane is the only one with a cell to give.
`lane_header` is that header for `lane_row`'s lanes, shared by the two editors so
they head identical lanes identically.
The headings were the other half, and they were pinning the wrong row. Every
non-pinned separator was a candidate, and the rule takes the last one at or above
the scroll — so what pinned was whatever muted line sat lowest under the heading.
In the Trophy case that meant a discipline's *description* stuck to the top and
the heading itself never did; at the foot of any list, the blank spacer above
Back pinned a blank row. So heading-ness is explicit now (`Separator.heading`,
conferred by `section_heading`, which is why every hand-rolled `── … ──` in the
app — the main menu's categories, the chat picker's Channels/Direct, Trace path's
candidate and ranked lists — now goes through it, and why three lanes headers
that genuinely *are* their block's only landmark say so).
A landmark is also no longer one line but a block: a heading plus the separators
written immediately under it, before the section's first row. Prose written there
is the section's preamble — the Trophy case's "what this discipline scores" — and
it belongs overhead with the heading rather than scrolling away from the rows it
explains. The block hands its rows over one at a time as they leave, so the
heading pins while its description is still the top content row and the two pin
together once both are gone: what is overhead always continues seamlessly into
the body. It never takes more than half the viewport, giving rows up from the
end, so the row that says *which* section this is is the last one dropped.
The frame settles the scroll against however many rows come back rather than
assuming one, and re-asks after sliding the window at the bottom — a heading
among the dropped lines would otherwise vanish instead of pinning.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The recipient picker listed every contact, but a courier message is a
direct message — and a DM to a repeater, room, or sensor is meaningless.
Filter the recipient list to companions (an untyped contact gets the
benefit of the doubt), and open it sorted A→Z by name instead of by
heard, with heard/packets/key still a Ctrl+arrow away.
Fold the rule the chat picker already applied inline into one shared
predicate, is_direct_messageable(node_type), so "DMs go to companions
only" is enforced in a single place and both pickers speak it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Direct section now lists only companion nodes (a contact whose
type was never advertised gets the benefit of the doubt) — repeaters,
rooms, and sensors are not DM targets. Pressing Del on a contacted
thread offers the reserved-red Cancel/Delete confirm; on commit the
peer's stored messages are removed (new Repository.delete_chat_history
— channel history and other peers untouched), the unread count clears,
and the re-entered picker shows the row hollow-dotted in the
uncontacted tail. The Del atom rides the existing deletable-row
machinery, with delete_hint now threaded through Ui/TuiUi/session
select so the footer advertises it only on rows it can act on.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A new make_name_key_resolver (beside its trace_runner siblings) maps a
display name back to the node's key — contacts win, the recorder's
stored advert names fill in strangers — and name_style's keyless
fallback becomes muted: colour now always marks a keyed identity,
never a character-sum accident that two spellings of one node disagree
on. Wired through every keyless call site: the chat transcript's
sender headers and @mentions (a direct thread falls back to the peer's
key), the picker previews, the live feed's channel-sender lane, and
the route graph's origin label (new key_of hook on route_graph_style,
threaded through the packet viewer and Message paths). The chat
picker's contact dot switches to the standard companion pink — shape
still marks history — and contact labels take their key-derived hue.
name_rgb guards the muted style so braille canvases render the grey.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The session cache fixed the reads screens make on open, but opening the
heaviest screens still stalled for seconds — because the pickers and
screen-openers that run *in front of* those screens were still reading the
radio directly. The menu wraps prompt-gathering and execution in one busy
overlay, so a Trace or Chat open pays its picker's slow round-trips before
the (already-cached) screen behind it ever builds, which is why caching the
screens alone showed no improvement.
Route the interactive-open reads through ctx.devstate too:
- Chat's conversation picker read the channel-slot probe *and* the contacts
table on every open (~5s) — both now come from the cache (channels mapped
from the cached slots via the new _channels_from_slots, contacts served
cached). The CLI list/send path keeps reading fresh.
- Trace and TX-optimize target pickers now read contacts from the cache.
- The repeater-admin screen and the channels manager (its slot probe, on a
local copy so mutations still re-probe the fresh layout after invalidation)
read through the cache.
Small, session-stable reads (self-info, build_snapshot's tuning/path-hash)
are left as direct reads — they were never the seconds.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Every select list now builds its closing furniture through one module,
so the conventions hold by construction instead of by copy-paste:
* Back is THE exit word — bare, no arrow, no icon — with exactly one
blank separator above it (back_rows). Courier and Watchtower lose
their "← Back"; the rules popover's "← Close" becomes Back too.
* The staged-changes exit pair (✓ Apply … / ✗ Back — discard) moves to
exit_rows, shared by the config editor and repeater admin, along with
changes_phrase and one confirm_discard dialog (apply/send verb
parametrised).
* Label + description rows share menu_rows (cell-padded lanes): Device
actions, channel detail, repeater actions, and — converted from the
inline "label — description" style — Send advert, Identity key, and
the channel manager's Add-a-channel section, whose rows now read as
two aligned lanes with the trailing … that marks "opens a prompt".
* Grouped-list headings share section_heading (── Label ── in accent):
Watchtower, Courier, the Time Machine picker, and the admin picker
(which also drops the stray 🔑 inside its heading).
* Status marks normalize to ✓/✗ (U+2713/17): Watchtower's ✔ and the
✖ on Cancel-this-message / Stop-watching become err-tinted ✗ rows.
* fit_cells replaces the four private _fit copies (channels, dashboard,
time machine, chat picker) and measures display cells, so a wide
glyph in a name can't skew a lane; empty-state notes drop their
parentheses ("no channels configured yet", "no matches").
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Chat, Channels, and Courier move into their own Messaging section at
the top; Mesh keeps the views over the mesh itself - Dashboard, Nodes,
Map, Atlas, Watchtower, Send advert - dropping from nine rows to six.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Messaging becomes Mesh and takes in Nodes (between Channels and Map —
the "who's out there" view) and Send advert (last in section: its one
action, after its views), so everything mesh-wide lives under one
heading. Device becomes Device management and keeps the box-level
tools; Diagnostics becomes Tools.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Tools gain an icon attribute — menu-only, so result windows and the
CLI keep the plain title — and the menu loop composes it into the
aligned name lane. Single-codepoint, emoji-presentation glyphs only,
so the two-cell width holds across terminals: 💬 Chat, 📻 Channels,
🌍 Map, 👥 Nodes, 📡 Send advert, 🔧 configuration, 🔨 actions,
📋 info, 🎯/👣 the traces, 🎧 Monitor, 📶 TX optimize, 🚪 Quit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
- Dialog footer hints take the border's hue one shade darker (hint.*
theme styles), mirroring the brighter title tinting.
- Dialogs get a blank breathing row above and below the body whenever
it doesn't cost visible content.
- The chat conversation picker gains column headers over its lanes.
- The map screen titles itself "Map", matching its menu item.
- The config editor lays settings out in aligned SETTING / VALUE /
DESCRIPTION columns under a header line, and with changes staged the
Apply and Back rows sit together below the blank separator.
- Device actions move out of the config editor into their own screen
behind a new menu-only device-actions tool (CLI equivalents stay
under the config group).
- Type-to-filter keeps section headers (and column headers) in place,
and section jumps now work over the filtered rows too.
- The main menu aligns tool names and muted descriptions into two
columns, headerless.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Enforce one voice across every screen: column and section headers are
UPPERCASE, menu items are Capitalized buttons, and short descriptions
drop their trailing period (with real ellipses instead of "...").
Tools gain a display `title` separate from their kebab-case CLI name,
so a menu item now reads exactly like the screen it opens ("Device
configuration" opens Device configuration) and result windows inherit
the same name. Every sub-screen backs out via a "Back" row below a
blank separator (the config editor was missing both; its Close is now
Back, spelling out the discard when changes are staged), while the main
menu and device picker keep "Quit". Panel and dialog titles now wear a
brighter tint of their border colour via new title.* theme styles.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Color-code the chat picker rows: a contact's dot takes that person's
chat hue (filled once talked-to, hollow before), previews light their
sender names and @mentions in-hue, and a relative age column sits
between the unread badge and the message text.
Pin a grouped list's section heading to the top row once it scrolls off
(sticky header in the frame), add PageUp/PageDown to SelectScreen, and
drop arrow wraparound in the conversation picker so it doesn't jump
across the section dividers.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the package directory, imports, brand strings, env-var prefixes,
console-script entry point, and the config/data dir (~/.config/meshterm).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>