A message that is too long for one packet now goes out as up to
message_parts_max parts (default 3, 1 turns it off), each ending with
its part number: [1/3], [2/3], [3/3]. Each part, with its part number,
fits in the byte limit of the conversation (130 for a channel, 150 for
a direct message). A cut goes at a space, and a word with no space to
cut at is cut between characters, never inside an emoji sequence or
after a combining accent.
Channel parts wait the transmit cooldown between them, so that the
floods do not go out as a burst. A direct part waits for the
acknowledgement of the part before it, or the end of its wait. An
unacknowledged part still lets the rest go out, and ^R retries each
one. A hard failure stops the rest and puts their text back in the
compose line. The byte gauge shows the number of parts and the bytes
of the last part. Rooms are not changed.
Co-Authored-By: Claude <noreply@anthropic.com>
Show private key drew its warning and no key in the menu since 0.10.0.
On the uConsole and the Cardputer Zero, MeshTerm now writes an imported
key into the node's identity.key and restarts the node. An import also
reads a file (hex text or raw bytes), expands a 32-byte seed, refuses a
key of the wrong length before the confirmation, and names a firmware
that has its import turned off. The run log no longer stores the key of
config import-key (a migration removes the stored ones), and an exported
key file is written with mode 0600. Refer to #26.
Co-Authored-By: Claude Haiku 5.5 <noreply@anthropic.com>
Greying every name that two keys ever used was too strict: a reflash with an
erase makes a new key, and 34 names on this mesh have one, JP's own among
them. Smog went grey this morning because of two keys silent since September.
The newest key now gets the name, and the name is grey only when another key
used it within name_overlap_days (a new Display preference, "Shared names",
default 7) of it: two live claimants. A contact that was never heard never
wins. On this machine's real data, LOG.IC 3R goes to its active key 47368a7c,
Smog to fa331c83, and 8 of 883 names stay grey.
The stored names come with their times from the one scan node_names() already
ran (node_names_with_times), so opening a chat costs no second scan.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
MeshTerm already stores every channel packet it hears, including those
on channels the device doesn't have. A packet names its channel only by
a one-byte hash, but a public channel's key is derived from its name, so
a candidate name can be tested: derive the key and check the packet's
MAC with it, exactly as the firmware does before decoding. The guide
tries the device's channels, Public, every #name mentioned in a stored
message, and every known region. On one desktop history that names 25
public channels.
A guessed name has to match at least two messages before the guide
shows it. The check compares three bytes, and with thousands of names
against thousands of packets roughly one false match is expected. The
candidates are grouped by their hash byte, so each packet only checks
the ~1/256 that could match; the naive loop took 40 s, this takes 1 s
on 31,000 messages, in a worker thread under a busy card, and the result
is kept for the session while its inputs are unchanged.
"Channel guide…" is the first row of "Add a channel" on the Channels
page, and it stays there when every slot is full. Channels not on the
device come first, and Enter adds one to the next free slot. Channels
the device already has follow with a ✓ the highlight doesn't walk, and a
closing line counts the messages no name matched. Each row shows the
message count, the age of the last message and seven days of activity.
`channels guide` lists the same channels on the command line.
Refs: #25
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
A new device ships with Public and nothing else, so changing devices
meant adding every channel again by hand: each private key pasted, each
# name typed, each send scope and mute set again. The Channels page now
has an "Export and import" section. Export writes every channel to one
TOML file, in slot order, with its key, its send scope and its mute.
Import reads such a file and adds its channels to the device.
Import never removes a channel. The channels of the file go first, in
the file's order, and whatever else the device holds follows them. A
channel with no free slot is reported, not forced in. Before anything is
written, a dialog shows the plan (what is added into which slot, what
moves) and ends on "Nothing is removed from the device." The slots are
read again in full before the plan is made, because a probe cut short
makes an occupied slot look free.
The file uses the same [[channels]] table as config backup, so a config
backup imports too. A # channel carries no secret, since the device
derives its key from the name. A private channel carries its key, so the
file is written readable by its owner only, and the export says how many
private keys it holds.
On the command line, `channels export FILE` writes the file and prints
its path, and `channels import --file FILE [--dry-run]` prints the
device's layout after the import, one row per channel with add, move,
keep or skip. `channels import INDEX URL` still imports a single link.
Refs: #25
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Each option, field, unit, exit status, and example output stays exactly
as it was.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
Joining a room moves out of Chat into a Rooms page beside Channels. It
lists every room server the radio knows, joined ones first, with each
room's access, unread count, last post and last-heard time. Each room
has a page: join, log in again, change password, open the board, forget
it, or delete its stored posts. Chat now lists only joined rooms, the way
it lists only channels on a slot, and only a joined room raises the
unread badge. chat join becomes rooms join, alongside rooms list and
rooms forget.
"No reply" told the reader nothing, because a room is just as silent for
a wrong password as for a login that never reached it. Testing on
hardware showed the commonest cause is neither: a login sent along the
route the radio had learned met silence, and the same login by flood was
accepted in eleven seconds. A silent login is now explained from what is
known: how it went out, when the room was last heard, and whether this
password has worked before. It offers the one next step that evidence
points at:
- Try by flood, after a learned route met silence. The radio forgets
the route (local, nothing transmitted), then sends the login once.
- Try again…, after a flood met silence. The prompt reopens with the
password filled in, so Enter resends it and typing replaces it.
- Add it & try again, when the radio doesn't hold the room as a contact.
Every retry is a button press, and none is ever sent on its own. A
password over 15 bytes is refused at the prompt, since MeshCore sends
only the first 15.
On the board, a failed or unfinished login used to leave the compose
line taking posts the room would drop. It now opens only while we are in
and may post, and otherwise says why and what to press. Opening a joined
room that has gone quiet logs in in the background. ^L runs the
explained flow.
Underneath, the login exchange listens for the radio's own confirmation,
matched to the login by its expected ack. It records whether the login
went by flood or along a route, or the radio's reason for not sending it
at all. This also corrects the debug log: "send unacknowledged" read the
library's wait for the *answer* as the send. On hardware the radio
confirms in under 0.1 s. Device.reset_route is new. The simulator learns
routes, can be given a stale one, and refloods.
Refs: #24
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
chat join logs in to a room server and prints what it allowed: member,
admin or read-only. It uses --password, or the password MeshTerm
remembers for the room. A room says nothing to a wrong password, so a
join that hears nothing fails (exit 4) and names both possible reasons.
send --to a room posts to it, and its receipt says kind "room". A room's
history names each post's author where a direct transcript names the
peer, drawn the way a route draws a hop: "Alice (d4e5f6a7)", or the bare
hash when nothing names the key. The document carries the author on
every row, null outside a room, so history answers in one shape for
every kind of conversation; listen streams it too. chat list calls a
room a room.
The CLI manual, the features guide and the README describe rooms, and
CLAUDE.md adds room and post to the lexicon, 📌 to the icons, and ^L to
the chord list.
Refs: #24
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
`meshterm emulate cardputer-zero --mock` and `meshterm emulate picocalc-lyra --mock`
open a desktop window drawing MeshTerm as that device's own screen draws it. An
EmulatedDevice (emulator/devices.py) holds what differs per handheld: the panel, a
Linux console's top-left grid and bold-as-bright 4-bit palette for the PicoCalc, the
lane keys drawn under the Cardputer's panel, and how each keyboard spells Shift with
an F-key (the PicoCalc's F6-F10, the Cardputer's xterm-shifted F4-F8).
It is not a strict emulator, and the docs say so wherever they offer it: MeshTerm runs
on the desktop as itself, and the window mimics the display's and keyboard's
constraints, never the CPU or the OS. Inside it the platform resolves with own_display
(platforms.drawn_by_meshterm), so nothing offers to move to another terminal.
Global options typed anywhere (--mock, --port, --db...) reach the emulated MeshTerm.
The command refuses --json like specimen. The Terminus fetch moved into the package as
`meshterm emulate --fetch-fonts` (with --archive for a copy fetched another way),
replacing scripts/cardputer-zero/fetch-terminus.py. A build without Tk says to install
with pip or pipx instead of failing.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
M5Stack makes three Cardputers and only the Zero runs Linux; the PicoCalc
takes several cores and only the Luckfox Lyra runs MeshTerm. So the bare
names were ambiguous, and every reference to the two devices now carries
the variant: the --platform values and MESHTERM_PLATFORM, the Platform
constants (PICOCALC_LYRA, CARDPUTER_ZERO), their lane decks and every
screen's picocalc_lyra_lane / cardputer_zero_lane, the font inventories,
the lane chips' theme styles, the scripts/ folders, the two chrome test
files, and the docs and CLAUDE.md that name them.
There is no alias: --platform picocalc is refused with the three real
choices listed, rather than falling back to the desktop layout. The
PicoCalc is auto-detected from its device tree, so it needs nothing.
What names hardware or a user's data keeps its name: the PicoCalc
keyboard's input-device name, its battery's sysfs supply, and the serial
profile the Lyra setup script writes. .gitignore follows the firmware's
folder, and the changelog keeps the words each release used.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
docs/ was one flat folder: the user guides, the CLI manual, the device
manuals, the code notes and an old survey side by side. It is now
guide/ (features, configuration, connecting, terminals), cli/ (the
manual as its README, the cookbook), devices/ (which manual is yours
as its README, then one per device) and development/ (architecture,
the survey); screenshots/ stays put. The index follows the folders.
The device manuals are named for the device they are about: the
PicoCalc's is picocalc-lyra.md, since MeshTerm runs on the PicoCalc's
Luckfox Lyra core and on none of the others, and the uConsole's stays
uconsole.md, since its CM4 and CM5 run it alike. A new cardputer-zero.md
opens on a warning that the device is not supported yet, says what has
been built and tested only in the simulator, and how to try it there.
Every relative link was resolved from where it was written and rewritten
from where it now lives, and the repo-root spellings in code, config and
the release skill moved with them; the changelog's GitHub URLs too.
Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>
