From c2d76e3697da0ed34d3d4b648770c558c1aec1fb Mon Sep 17 00:00:00 2001 From: Jean-Pierre Martineau Date: Wed, 16 Sep 2026 01:51:35 -0400 Subject: [PATCH] The seam blurs under 0.05, between the two ladder verdicts Tighter (0.035) left wedges a reader had to hunt for, looser (0.10) blurred pairs whose point still read plainly. Set by eye on the same ladder. Co-Authored-By: Claude Fable 5.1 --- meshterm/ui/pathline.py | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/meshterm/ui/pathline.py b/meshterm/ui/pathline.py index 3a8c754..80ecb3c 100644 --- a/meshterm/ui/pathline.py +++ b/meshterm/ui/pathline.py @@ -273,13 +273,12 @@ def _style_hex(style: str) -> str | None: #: restated the hue gap (a fixed byte step is a near-constant ``55``–``60`` of 8-bit RGB #: all the way round). The value was then set by eye on a ladder of the spectrum's own #: pairs drawn both ways (JP, 2026-09-16), and it sits where the solid point is not just -#: detectable at one cell but *found* without looking for it: ``0.10``, five noticeable -#: differences, the typical ``0x10`` pair with a little to spare. Tighter (``0.035`` was -#: tried) left wedges a reader had to hunt for; the safe side is this one, since a wrong -#: blur still draws a legible seam and a wrong interlock draws none. ``0x10`` of green is +#: detectable at one cell but *found* without looking for it: ``0.05``, two and a half +#: noticeable differences. Tighter (``0.035``) left wedges a reader had to hunt for; +#: looser (``0.10``) blurred pairs whose point still read plainly. ``0x10`` of green is #: ``0.026`` and blurs; ``0x10`` of red is ``0.124`` and doesn't; the two greys, ``0.18`` #: apart, keep their interlock on the metric alone. -SEAM_BLUR = 0.10 +SEAM_BLUR = 0.05 #: How far the thin chevron's colour steps from the fill it is drawn in, in OKLab ``L`` #: — a lightness shift alone, so it reads as *that chip's colour, shaded* rather than as