diff --git a/meshterm/ui/pathline.py b/meshterm/ui/pathline.py index 6773729..3a8c754 100644 --- a/meshterm/ui/pathline.py +++ b/meshterm/ui/pathline.py @@ -272,12 +272,14 @@ def _style_hex(style: str) -> str | None: #: blurred too little there and too much here, and an sRGB distance would only have #: restated the hue gap (a fixed byte step is a near-constant ``55``–``60`` of 8-bit RGB #: all the way round). The value was then set by eye on a ladder of the spectrum's own -#: pairs drawn both ways (JP, 2026-09-16): the solid point stays findable at one cell -#: down to a little under two noticeable differences, and below that the wedge is gone. -#: So the interlock is the ordinary seam and the thin chevron is for fills that are the -#: same or as good as — a mirrored leg, a keyless run, the greens' nearest neighbours -#: (``0x10`` of green is ``0.026`` and blurs; ``0x10`` of red is ``0.124`` and doesn't). -SEAM_BLUR = 0.035 +#: pairs drawn both ways (JP, 2026-09-16), and it sits where the solid point is not just +#: detectable at one cell but *found* without looking for it: ``0.10``, five noticeable +#: differences, the typical ``0x10`` pair with a little to spare. Tighter (``0.035`` was +#: tried) left wedges a reader had to hunt for; the safe side is this one, since a wrong +#: blur still draws a legible seam and a wrong interlock draws none. ``0x10`` of green is +#: ``0.026`` and blurs; ``0x10`` of red is ``0.124`` and doesn't; the two greys, ``0.18`` +#: apart, keep their interlock on the metric alone. +SEAM_BLUR = 0.10 #: How far the thin chevron's colour steps from the fill it is drawn in, in OKLab ``L`` #: — a lightness shift alone, so it reads as *that chip's colour, shaded* rather than as