# Conflicts: # docs/payloads.md # examples/companion_radio/DataStore.cpp # examples/companion_radio/DataStore.h # examples/companion_radio/MyMesh.cpp # examples/companion_radio/MyMesh.h # examples/companion_radio/NodePrefs.h # examples/companion_radio/main.cpp # examples/simple_room_server/MyMesh.cpp # examples/simple_room_server/MyMesh.h # examples/simple_sensor/SensorMesh.cpp # platformio.ini # src/Utils.cpp # src/helpers/CommonCLI.cpp # src/helpers/CommonCLI.h # src/helpers/NRF52Board.cpp # src/helpers/nrf52/SerialEthernetInterface.cpp # src/helpers/radiolib/CustomLLCC68.h # src/helpers/radiolib/CustomLLCC68Wrapper.h # src/helpers/radiolib/CustomLR1110.h # src/helpers/radiolib/CustomSTM32WLxWrapper.h # src/helpers/radiolib/CustomSX1262.h # src/helpers/radiolib/CustomSX1268.h # src/helpers/radiolib/CustomSX1268Wrapper.h # src/helpers/ui/ST7735Display.cpp # test/mocks/Stream.h # variants/minewsemi_me25ls01/target.h # variants/wio-tracker-l1/platformio.ini
45 lines
1.6 KiB
C++
45 lines
1.6 KiB
C++
#pragma once
|
|
#include <cstdint> // For uint8_t, uint32_t
|
|
|
|
#define TELEM_MODE_DENY 0
|
|
#define TELEM_MODE_ALLOW_FLAGS 1 // use contact.flags
|
|
#define TELEM_MODE_ALLOW_ALL 2
|
|
|
|
#define ADVERT_LOC_NONE 0
|
|
#define ADVERT_LOC_SHARE 1
|
|
|
|
struct NodePrefs { // persisted to file
|
|
float airtime_factor;
|
|
char node_name[32];
|
|
float freq;
|
|
uint8_t sf;
|
|
uint8_t cr;
|
|
uint8_t multi_acks;
|
|
uint8_t manual_add_contacts;
|
|
float bw;
|
|
int8_t tx_power_dbm;
|
|
uint8_t telemetry_mode_base;
|
|
uint8_t telemetry_mode_loc;
|
|
uint8_t telemetry_mode_env;
|
|
float rx_delay_base;
|
|
uint32_t ble_pin;
|
|
uint8_t advert_loc_policy;
|
|
uint8_t buzzer_quiet;
|
|
uint8_t gps_enabled; // GPS enabled flag (0=disabled, 1=enabled)
|
|
uint32_t gps_interval; // GPS read interval in seconds
|
|
uint8_t autoadd_config; // bitmask for auto-add contacts config
|
|
uint8_t rx_boosted_gain; // SX126x RX boosted gain mode (0=power saving, 1=boosted)
|
|
uint8_t radio_fem_rxgain; // LoRa FEM RX gain setting
|
|
uint8_t client_repeat;
|
|
uint8_t path_hash_mode; // which path mode to use when sending
|
|
uint8_t autoadd_max_hops; // 0 = no limit, 1 = direct (0 hops), N = up to N-1 hops (max 64)
|
|
char default_scope_name[31];
|
|
uint8_t default_scope_key[16];
|
|
uint8_t radio_fem_rxgain_override; // 1 once the user overrides the build default
|
|
|
|
// Keep the upstream repeat API while retaining the existing binary prefs
|
|
// layout used by this branch.
|
|
bool isRepeatEn() const { return client_repeat != 0; }
|
|
void setRepeatEn(bool enabled) { client_repeat = enabled ? 1 : 0; }
|
|
};
|