Files
MeshCore/variants/sensecap_solar/SenseCapSolarBoard.h
T
mikecarper ab6412e73c Add persistent battery ADC calibration across boards
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.

Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
2026-10-22 18:56:32 -07:00

75 lines
2.1 KiB
C++

#pragma once
#include <MeshCore.h>
#include <Arduino.h>
#include <helpers/NRF52Board.h>
class SenseCapSolarBoard : public NRF52BoardDCDC {
protected:
#ifdef NRF52_POWER_MANAGEMENT
void initiateShutdown(uint8_t reason) override;
#endif
public:
SenseCapSolarBoard() : NRF52Board("SENSECAP_SOLAR_OTA") {}
void begin();
#if defined(P_LORA_TX_LED)
void applyLedPolicy() override {
NRF52Board::applyLedPolicy();
if (!mesh::leds::enabled()) digitalWrite(P_LORA_TX_LED, LOW);
}
void onBeforeTransmit() override {
if (mesh::leds::enabled()) digitalWrite(P_LORA_TX_LED, HIGH); // turn TX LED on
}
void onAfterTransmit() override {
digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
}
#endif
bool supportsBatteryCalibration() const override { return true; }
uint16_t getBattMilliVolts() override {
digitalWrite(VBAT_ENABLE, LOW);
int adcvalue = 0;
analogReadResolution(12);
analogReference(AR_INTERNAL_3_0);
delay(10);
adcvalue = analogRead(BATTERY_PIN);
return calibrateBatteryMillivolts((adcvalue * ADC_MULTIPLIER * AREF_VOLTAGE) / 4.096);
}
const char* getManufacturerName() const override {
return "Seeed SenseCap Solar";
}
void shutdownPeripherals() override {
NRF52Board::shutdownPeripherals();
digitalWrite(LED_WHITE, LOW);
digitalWrite(LED_BLUE, LOW);
#ifdef PIN_USER_BTN
while (digitalRead(PIN_USER_BTN) == LOW);
// Keep pull-up enabled in system-off so the wake line doesn't float low.
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(g_ADigitalPinMap[PIN_USER_BTN]), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
#elif defined(PIN_BUTTON1)
while (digitalRead(PIN_BUTTON1) == LOW);
// Keep pull-up enabled in system-off so the wake line doesn't float low.
nrf_gpio_cfg_sense_input(digitalPinToInterrupt(g_ADigitalPinMap[PIN_BUTTON1]), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
#endif
}
void powerOff() override {
shutdownPeripherals();
#ifdef NRF52_POWER_MANAGEMENT
shutdownPeripherals();
initiateShutdown(SHUTDOWN_REASON_USER);
#else
NRF52Board::powerOff();
#endif
}
};