Files
MeshCore/variants/heltec_v4/HeltecV4Board.h
T
agessaman e905451dce feat(radio): drive LoRa FEM RX gain from radio_fem_rxgain (heltec_v4)
Completes the FEM RX-gain restoration begun in the CAD/prefs change, which
persisted radio_fem_rxgain but didn't yet drive the hardware. Also dropped
by the 22eb9b87 revert; restored to match upstream.

- MainBoard: setLoRaFemLnaEnabled()/canControlLoRaFemLna()/isLoRaFemLnaEnabled()
  virtuals (default: can't control — non-FEM boards report unsupported)
- heltec_v4: board overrides driving loRaFEMControl; LoRaFEMControl gains the
  isLNAEnabled() getter (it already tracked lna_enabled and drove the FEM)
- CLI: `set radio.fem.rxgain on/off` / `get radio.fem.rxgain` (guarded by
  canControlLoRaFemLna, so it reports "unsupported" on non-FEM boards)
- app startup applies the persisted pref: board.setLoRaFemLnaEnabled(
  _prefs.radio_fem_rxgain), beside setRxBoostedGainMode

Default is ON (upstream), so on FEM boards the LNA is enabled after upgrade —
a real reception behavior change to confirm on hardware. The other FEM
variants (heltec_t096/tower_v2/tracker_v2) need the same small board-override
addition; until then `radio.fem.rxgain` reports unsupported there (no
regression — status quo).

Builds: heltec_v4 repeater-observer + room-observer (FEM board), Heltec_v3
repeater (non-FEM, base virtuals no-op). NEEDS on-device validation on a
Heltec V4.
2026-07-09 11:20:07 -07:00

44 lines
1.1 KiB
C++

#pragma once
#include <Arduino.h>
#include <helpers/RefCountedDigitalPin.h>
#include <helpers/ESP32Board.h>
#include <driver/rtc_io.h>
#include "LoRaFEMControl.h"
#ifndef ADC_MULTIPLIER
#define ADC_MULTIPLIER 5.42
#endif
class HeltecV4Board : public ESP32Board {
protected:
float adc_mult = ADC_MULTIPLIER;
public:
RefCountedDigitalPin periph_power;
LoRaFEMControl loRaFEMControl;
HeltecV4Board() : periph_power(PIN_VEXT_EN,PIN_VEXT_EN_ACTIVE) { }
void begin();
void onBeforeTransmit(void) override;
void onAfterTransmit(void) override;
void enterDeepSleep(uint32_t secs, int pin_wake_btn = -1);
void powerOff() override;
uint16_t getBattMilliVolts() override;
bool setAdcMultiplier(float multiplier) override {
if (multiplier == 0.0f) {
adc_mult = ADC_MULTIPLIER;
} else {
adc_mult = multiplier;
}
return true;
}
float getAdcMultiplier() const override { return adc_mult; }
const char* getManufacturerName() const override;
bool setLoRaFemLnaEnabled(bool enable) override;
bool canControlLoRaFemLna() const override;
bool isLoRaFemLnaEnabled() const override;
};