rich/MeshCore
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
a14bbdc58f3c2613f3497babe8a88f24351cd398
MeshCore/platformio.ini
T
mikecarper 7a463937ca Reduce shared RAM usage without lowering firmware capacities 
Specialize repeater ACL session state, compact recent and flood records, stream Merkle proofs, and release cold OTA buffers safely. Preserve saved formats, stack sizes, table capacities, and OTA source limits. Account for lazy buffers when active and add compatibility, ARM alignment, allocation failure, and queued-response tests.

Validated six representative board/role builds, 1736 native test cases, sanitizer fixtures, and strict documentation. Document the preexisting Wio-E5 Mini flash overflow separately.
2026-10-08 14:41:16 -07:00

517 lines
19 KiB
INI
Raw Blame History

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[platformio]
extra_configs =
variants/*/platformio.ini
platformio.local.ini
[arduino_base]
framework = arduino
monitor_speed = 115200
lib_deps =
SPI
Wire
;jgromes/RadioLib @ ^7.7.1
https://github.com/jgromes/RadioLib.git#187ef24791c3d844939b2be13a68bd890bd04e4c
rweather/Crypto @ ^0.4.0
adafruit/RTClib @ ^2.1.3
melopero/Melopero RV3028 @ ^1.1.0
electroniccats/CayenneLPP @ 1.6.1
build_flags = -w -DNDEBUG -DRADIOLIB_STATIC_ONLY=1 -DRADIOLIB_GODMODE=1
-D LORA_FREQ=869.618
-D LORA_BW=62.5
-D LORA_SF=8
; TCXO startup delay in microseconds, written by CustomSX1262/CustomLR1110
; after begin(). RadioLib defaults to 5000 and nothing used to override it, so
; every board paid 5 ms on every duty-cycle wake. Lowest working value measured
; on five modules: T096 400, Tracker V2 300, Waveshare 150, ThinkNode M3 200,
; T1000-E 200 us (single-unit RX scan test). The 1600 us base keeps 4x margin
; over the worst of them. It also feeds the RXPS sleep floor and timer guard
; (transition = this + 1000), so lowering
; it makes low-SF profiles armable that were not. A board needing its own value
; puts -D MC_TCXO_DELAY_US=... in its own build_flags; the later -D wins.
-D MC_TCXO_DELAY_US=1600
-D ENABLE_ADVERT_ON_BOOT=1
-D ENABLE_PRIVATE_KEY_IMPORT=1 ; NOTE: comment these out for more secure firmware
-D ENABLE_PRIVATE_KEY_EXPORT=1
-D RADIOLIB_EXCLUDE_CC1101=1
-D RADIOLIB_EXCLUDE_RF69=1
-D RADIOLIB_EXCLUDE_SX1231=1
-D RADIOLIB_EXCLUDE_SI443X=1
-D RADIOLIB_EXCLUDE_RFM2X=1
-D RADIOLIB_EXCLUDE_SX128X=1
-D RADIOLIB_EXCLUDE_AFSK=1
-D RADIOLIB_EXCLUDE_AX25=1
-D RADIOLIB_EXCLUDE_HELLSCHREIBER=1
-D RADIOLIB_EXCLUDE_MORSE=1
-D RADIOLIB_EXCLUDE_APRS=1
-D RADIOLIB_EXCLUDE_BELL=1
-D RADIOLIB_EXCLUDE_RTTY=1
-D RADIOLIB_EXCLUDE_SSTV=1
build_src_filter =
+<*.cpp>
+<helpers/*.cpp>
+<helpers/ui/DisplayDriver.cpp>
+<helpers/ui/DisplayPowerSettings.cpp>
+<helpers/ota/OtaTinf.c>
; MQTT-only sources (need Timezone/NTPClient); observer envs add them back.
-<helpers/MQTTMessageBuilder.cpp>
-<helpers/JWTHelper.cpp>
+<helpers/radiolib/*.cpp>
+<helpers/bridges/BridgeBase.cpp>
+<helpers/ui/MomentaryButton.cpp>
; ----------------- ESP32 ---------------------
[esp32_base]
extends = arduino_base
platform = platformio/espressif32@6.11.0
monitor_filters = esp32_exception_decoder
; OTA is available on every ESP32 variant (A/B via esp_ota; the detools-sequential apply decodes into the
; inactive slot). The received .mota is staged in the INACTIVE OTA slot (OtaStoreFlashEsp32), not RAM, so
; deltas/full images of any size fetch over the air (RX-safe, sector-coalesced). The build always includes
; it; for `applydelta` to actually run, the board must use a dual-app/OTA partition table
; (board_build.partitions) with two app slots + otadata (boards without one fetch-refuse cleanly).
; pio_endf appends the EndF self-identity trailer. (nRF52 single-slot OTA is enabled per-board, not here -
; it needs a custom bootloader; RP2040/STM32 have no A/B path yet.)
extra_scripts =
pre:scripts/client_acl_role.py
pre:scripts/generate_webconfig_html.py
pre:scripts/meshcore_image_identity.py
pre:scripts/ota_device_deflate_role.py
pre:scripts/portable_esp32_link.py
pre:scripts/esp32_ota_heap_context.py
pre:scripts/esp32_usb_session_fix.py
pre:scripts/esp32_file_buffer_fix.py
pre:scripts/esp32_wifi_scan_fix.py
pre:scripts/esp32_async_web_fix.py
merge-bin.py
post:tools/mota/pio_endf.py
post:scripts/check_esp32_dram.py
post:scripts/check_firmware_ram.py
build_flags = ${arduino_base.build_flags}
-D ESP32_PLATFORM
-D ENABLE_OTA=1
-D OTA_FLASH_STORE=1
; Keep the fixed-offset MeshCore image identity even though application code
; does not reference it directly. The flasher reads it before boot.
-Wl,-u,meshcore_image_identity
-D OTA_FOLDER_SERIAL ; `ota folder on` relays a host folder of .mota over the USB console (no extra HW)
; Route esp_transport_ws_init through src/helpers/ESP32WsTransportFix.cpp to
; fix a heap-overflow in the precompiled IDF 4.4 WS transport (see that file).
-Wl,--wrap=esp_transport_ws_init
; -D ESP32_CPU_FREQ=80 ; change it to your need
lib_deps = ${arduino_base.lib_deps}
; Keep these as a matched pair. ESPAsyncWebServer 3.12.0 relies on
; AsyncTCP 3.5.0's synchronous close/abort behavior and request-lifetime fix.
ESP32Async/AsyncTCP @ 3.5.0
ESP32Async/ESPAsyncWebServer @ 3.12.0
bblanchon/ArduinoJson @ 7.4.3
; Generic WiFi-join QR rendering is linked only by ESP32 display builds.
ricmoo/QRCode @ 0.0.1
build_src_filter = ${arduino_base.build_src_filter}
+<helpers/ui/DisplayDriver.cpp>
; Shared WiFi transport moved out of esp32/ upstream. Keep it available to
; this fork's WiFi/MQTT and synthesized Full profiles as well.
+<helpers/wifi/*.cpp>
+<helpers/esp32/WebConfigServer.cpp>
+<helpers/esp32/PortableErrorStrings.cpp>
+<helpers/esp32/WiFiOtaSeeder.cpp>
+<helpers/esp32/BootFileSystem.cpp>
+<helpers/ota/*.cpp>
+<helpers/ota/detools/detools.c>
[esp32_ota]
lib_deps =
ESP32Async/AsyncTCP @ 3.5.0
ESP32Async/ESPAsyncWebServer @ 3.12.0
file://arch/esp32/AsyncElegantOTA
; esp32c6 uses arduino framework 3.x
; WARNING: experimental. May not work as stable as other platforms.
[esp32c6_base]
extends = esp32_base
platform = https://github.com/pioarduino/platform-espressif32/releases/download/53.03.13-1/platform-espressif32.zip
; ESP32-S3 Full Companion images use the ROM-compatible dual-I/O flash mode.
; This is independent of the board's PSRAM type and of whether the USB
; connector exposes the S3 native USB peripheral. Ordinary non-Full profiles
; keep their existing board-specific flash mode.
[esp32_s3_full]
board_build.flash_mode = dio
; ----------------- NRF52 ---------------------
[nrf52_base]
extends = arduino_base
platform = nordicnrf52
platform_packages =
; use internal fork that includes patch to ble stack to prevent firmware lockup during rapid connect/disconnect
; https://github.com/meshcore-dev/MeshCore/pull/1177
; https://github.com/meshcore-dev/MeshCore/pull/1295
framework-arduinoadafruitnrf52 @ https://github.com/meshcore-dev/Adafruit_nRF52_Arduino#d541301665b40959682252911e57b11df3ee651a
platformio/toolchain-gccarmnoneeabi@^1.140201.0
extra_scripts = create-uf2.py
pre:scripts/client_acl_role.py
pre:scripts/ota_device_deflate_role.py
pre:scripts/nrf52_usb_power_fix.py
pre:scripts/nrf52_internal_flash_fix.py
pre:scripts/nrf52_ble_cccd_fix.py
pre:scripts/nrf52_ble_dfu_fix.py
pre:scripts/nrf52_loop_stack_fix.py
pre:scripts/nrf52_internal_bootloader_link.py
; Nordic's builder otherwise overwrites the LTO-aware archive tools.
pre:scripts/nrf52_lto_toolchain.py
; Infrastructure-only trims; all Companion/Terminal Chat profiles excluded.
pre:scripts/nrf52_flash_trim.py
post:scripts/check_firmware_ram.py
post:scripts/check_nrf52_ble_dfu_handoff.py
; Nordic's framework defaults to -Ofast. Prefer the size-oriented profile for
; nRF52 images, where a smaller binary preserves OTA and filesystem headroom.
build_unflags =
-Ofast
build_flags = ${arduino_base.build_flags}
-Oz
-flto
; A single LTO partition avoids GCC 14 emitting out-of-range Thumb literals
; for cross-partition clones on larger nRF52 role images.
-flto-partition=one
-fno-inline-small-functions
-fipa-pta
-fmerge-all-constants
-fno-ipa-cp-clone
-fno-partial-inlining
-fno-jump-tables
-fno-tree-switch-conversion
-fno-semantic-interposition
-fno-unwind-tables
-fno-asynchronous-unwind-tables
-fno-schedule-insns2
-Wl,--sort-section=alignment
; PendSV reaches this FreeRTOS function from assembly, outside the LTO graph.
-Wl,--undefined=vTaskSwitchContext
-D NRF52_PLATFORM
-D LFS_NO_ASSERT=1
-D EXTRAFS=1
-D MESH_NRF52_LOOP_STACK_WORDS=2048
-Wl,--wrap=xTaskCreate
-D USE_CC310_HW_CRYPTO=1
lib_deps =
${arduino_base.lib_deps}
https://github.com/oltaco/CustomLFS#0.2.3
; Vendored ESP-IDF MQTT client; the LDF otherwise pulls it into non-ESP builds.
lib_ignore = PsychicMqttClient
; Shared LoRa OTA recipe for nRF52840 variants. nRF52840 has no A/B slot, so the update is
; applied in place by the custom OTAFIX bootloader (in-place detools); the app only stages + verifies +
; approves it. OtaFlashLayout_nrf52.h derives the safe ceiling from the linked app region and secondary
; storage: internal ExtraFS stays protected at 0xD4000; QSPI/no-ExtraFS roles can stage through 0xED000.
; The EndF hook records that resolved geometry so motatool can size each in-place patch without target-name
; heuristics. An older bootloader makes the app stage below 0xD4000; packages sized for the expanded window
; require the updated OTAFIX bootloader (or a legacy motatool override). The device must run the matching
; OTAFIX bootloader for `applydelta` to actually apply. (detools.c is intentionally NOT built into the app -
; only the bootloader decodes.) The [rak4631] base defines this same recipe inline because it carries
; board-specific extras (fix_bsec_lib.py, BSEC lib) and a fixed post-script order.
[nrf52_lora_ota]
extends = nrf52_base
extra_scripts = ${nrf52_base.extra_scripts}
post:tools/mota/pio_endf.py
build_flags = ${nrf52_base.build_flags}
-D ENABLE_OTA=1
-D OTA_FLASH_STORE=1
-D OTA_FOLDER_SERIAL ; `ota folder on` relays a host folder of .mota over the USB console (no extra HW)
build_src_filter = ${nrf52_base.build_src_filter}
+<helpers/ota/*.cpp>
lib_deps = ${nrf52_base.lib_deps}
; Opt-in for repeater environments whose exact board has dedicated QSPI flash
; and a matching QSPI-capable OTAFIX bootloader. The raw OTA store owns that
; chip, so companion builds that mount QSPI as LittleFS must not use this flag.
[nrf52_qspi_ota]
build_flags =
-D OTA_QSPI_STORE=1
; RAK15001 is a single-data-line GD25Q16C connected to the WisBlock sensor
; SPI bus. The nRF QSPI peripheral can issue its FAST_READ and page-program
; commands in single-line mode, but the module's 15 MHz limit requires an
; 8 MHz clock. Exact JEDEC matching makes a missing or different shared-bus
; device fail closed instead of being mistaken for an OTA store.
[nrf52_rak15001_ota]
build_flags =
${nrf52_qspi_ota.build_flags}
-D OTA_QSPI_SHARED_WISBLOCK_SPI=1
-D OTA_QSPI_SCK_ARDUINO_PIN=3
-D OTA_QSPI_CS_ARDUINO_PIN=26
-D OTA_QSPI_IO0_ARDUINO_PIN=30
-D OTA_QSPI_IO1_ARDUINO_PIN=29
-D OTA_QSPI_IO2_NOT_CONNECTED=1
-D OTA_QSPI_IO3_NOT_CONNECTED=1
-D OTA_QSPI_SCK_FREQUENCY=NRF_QSPI_FREQ_32MDIV4
-D OTA_QSPI_EXPECTED_JEDEC_ID=0xC84015UL
-D OTA_QSPI_EXPECTED_SIZE=2097152UL
; Six-pin Winbond W25Q16JV breakout wired permanently to a RAK19007. It shares
; the WisBlock SPI clock/data nets but has a dedicated chip-select on AIN1, so
; one base-board wiring can be used with either RAK4631 or RAK3401+RAK13302.
; The breakout exposes standard SPI only, so use single-data-line nRF QSPI
; mode. Exact JEDEC matching rejects substituted W25Q32/64/128 boards. Keep
; the clock at 8 MHz for short wiring and power it from J12 VDD so the matching
; bootloader can read the staged image after reset.
[nrf52_wisblock_w25q16_ota]
build_flags =
${nrf52_qspi_ota.build_flags}
-D OTA_QSPI_SHARED_WISBLOCK_SPI=1
-D OTA_QSPI_SCK_ARDUINO_PIN=3
-D OTA_QSPI_CS_ARDUINO_PIN=31
-D OTA_QSPI_IO0_ARDUINO_PIN=30
-D OTA_QSPI_IO1_ARDUINO_PIN=29
-D OTA_QSPI_IO2_NOT_CONNECTED=1
-D OTA_QSPI_IO3_NOT_CONNECTED=1
-D OTA_QSPI_SCK_FREQUENCY=NRF_QSPI_FREQ_32MDIV4
-D OTA_QSPI_EXPECTED_JEDEC_ID=0xEF4015UL
-D OTA_QSPI_EXPECTED_SIZE=2097152UL
; One RAK repeater image can use the RAK15001 (RAK4631 only), the separately
; wired W25Q16, or internal flash. The application probes exact JEDEC IDs and
; selects external staging only when the installed OTAFIX supports QSPI apply.
[nrf52_wisblock_auto_ota]
build_flags =
-D OTA_RAK_AUTO_STORE=1
-D OTA_QSPI_STORE=1
-D OTA_FLASH_STORE=1
-D OTA_QSPI_SHARED_WISBLOCK_SPI=1
-D OTA_QSPI_SCK_ARDUINO_PIN=3
-D OTA_QSPI_CS_ARDUINO_PIN=31
-D OTA_QSPI_IO0_ARDUINO_PIN=30
-D OTA_QSPI_IO1_ARDUINO_PIN=29
-D OTA_QSPI_IO2_NOT_CONNECTED=1
-D OTA_QSPI_IO3_NOT_CONNECTED=1
-D OTA_QSPI_SCK_FREQUENCY=NRF_QSPI_FREQ_32MDIV4
-D OTA_QSPI_EXPECTED_SIZE=2097152UL
; Compatibility alias retained for existing nRF52840 board definitions.
[rak4631_hw]
extends = nrf52_lora_ota
extra_scripts = ${nrf52_lora_ota.extra_scripts}
build_flags = ${nrf52_lora_ota.build_flags}
build_src_filter = ${nrf52_lora_ota.build_src_filter}
lib_deps = ${nrf52_lora_ota.lib_deps}
; ----------------- RP2040 ---------------------
[rp2040_base]
extends = arduino_base
extra_scripts = pre:scripts/client_acl_role.py
post:scripts/check_firmware_ram.py
upload_protocol = picotool
board_build.core = earlephilhower
platform = https://github.com/maxgerhardt/platform-raspberrypi.git ; framework-arduinopico @ 1.50600.0+sha.6a1d13e9
build_flags = ${arduino_base.build_flags}
-D RP2040_PLATFORM
; Arduino-Pico ships board-specific helper libraries alongside its core.
; Deep dependency discovery can mistake iLabs_Hearth for an application
; dependency even on boards without its required ESP32-C6 coprocessor.
lib_ignore = iLabs Hearth
; ----------------- STM32 ----------------------
[stm32_base]
extends = arduino_base
; RadioLib's pinned STM32WL HAL uses the Arduino 2.x GPIO API. STM32 platform
; 20 / Arduino 3 changes those signatures; keep release builds reproducible.
platform = ststm32@19.5.0
extra_scripts = post:arch/stm32/build_hex.py
pre:scripts/client_acl_role.py
post:scripts/check_firmware_ram.py
build_flags = ${arduino_base.build_flags}
-D STM32_PLATFORM
-D ED25519_COMPACT_BASE=1
-I src/helpers/stm32
-I $PROJECT_PACKAGES_DIR/framework-arduinoststm32/libraries/SubGhz/src
build_src_filter = ${arduino_base.build_src_filter}
+<helpers/stm32>
lib_deps = ${arduino_base.lib_deps}
file://arch/stm32/Adafruit_LittleFS_stm32
SubGhz
[i2c_voltage_monitor_base]
build_flags =
-D ENV_INCLUDE_INA3221=1
-D ENV_INCLUDE_INA219=1
-D ENV_INCLUDE_INA226=1
-D ENV_INCLUDE_INA260=1
lib_deps =
adafruit/Adafruit INA3221 Library @ ^1.0.1
adafruit/Adafruit INA219 @ ^1.2.3
robtillaart/INA226 @ ^0.6.4
adafruit/Adafruit INA260 Library @ ^1.5.3
[sensor_base]
build_flags =
-D ENV_INCLUDE_GPS=1
-D ENV_INCLUDE_AHTX0=1
-D ENV_INCLUDE_BME280=1
-D ENV_INCLUDE_BMP280=1
-D ENV_INCLUDE_SHTC3=1
-D ENV_INCLUDE_SHT4X=1
-D ENV_INCLUDE_LPS22HB=1
${i2c_voltage_monitor_base.build_flags}
-D ENV_INCLUDE_MLX90614=1
-D ENV_INCLUDE_VL53L0X=1
-D ENV_INCLUDE_BME680=1
-D ENV_INCLUDE_BMP085=1
lib_deps =
${i2c_voltage_monitor_base.lib_deps}
adafruit/Adafruit AHTX0 @ ^2.0.5
adafruit/Adafruit BME280 Library @ ^2.3.0
adafruit/Adafruit BMP280 Library @ ^2.6.8
adafruit/Adafruit SHTC3 Library @ ^1.0.1
sensirion/Sensirion I2C SHT4x @ ^1.1.2
arduino-libraries/Arduino_LPS22HB @ ^1.0.2
adafruit/Adafruit MLX90614 Library @ ^2.1.5
adafruit/Adafruit_VL53L0X @ ^1.2.4
stevemarple/MicroNMEA @ ^2.0.6
adafruit/Adafruit BME680 Library @ ^2.0.4
adafruit/Adafruit BMP085 Library @ ^1.2.4
; Shared trim for optional environmental/ranging sensors. Board-native radio,
; display, buttons, battery monitoring, and other board telemetry remain.
[nrf52_external_environmental_sensor_trim]
build_flags =
-UENV_INCLUDE_AHTX0
-UENV_INCLUDE_BME280
-UENV_INCLUDE_BMP280
-UENV_INCLUDE_SHTC3
-UENV_INCLUDE_SHT4X
-UENV_INCLUDE_LPS22HB
-UENV_INCLUDE_MLX90614
-UENV_INCLUDE_VL53L0X
-UENV_INCLUDE_BME680
-UENV_INCLUDE_BMP085
-UENV_INCLUDE_RAK12035
-UENV_INCLUDE_BME680_BSEC
; Lean nRF52 LoRa OTA roles with onboard GPS use this full external-sensor
; trim. Board-native GPS remains.
[nrf52_no_external_sensors_keep_gps]
build_flags =
${nrf52_external_environmental_sensor_trim.build_flags}
-UENV_INCLUDE_INA3221
-UENV_INCLUDE_INA219
-UENV_INCLUDE_INA226
-UENV_INCLUDE_INA260
lib_deps =
stevemarple/MicroNMEA @ ^2.0.6
; Lean nRF52 LoRa OTA roles without onboard GPS also remove the GPS provider.
[nrf52_no_external_sensors]
build_flags =
${nrf52_no_external_sensors_keep_gps.build_flags}
-UENV_INCLUDE_GPS
; RAK reduced OTA roles retain the common I2C voltage/current monitor set at a
; measured 4,808-byte linked-flash cost while omitting the larger optional
; environmental/ranging sensor set.
[nrf52_reduced_sensors_keep_ina_gps]
build_flags =
${nrf52_external_environmental_sensor_trim.build_flags}
${i2c_voltage_monitor_base.build_flags}
lib_deps =
stevemarple/MicroNMEA @ ^2.0.6
${i2c_voltage_monitor_base.lib_deps}
[nrf52_reduced_sensors_keep_ina]
build_flags =
${nrf52_reduced_sensors_keep_ina_gps.build_flags}
-UENV_INCLUDE_GPS
lib_deps =
${i2c_voltage_monitor_base.lib_deps}
; ----------------- TESTING ---------------------
; Host GoogleTest suites for the fork's pure logic. See test/README.md.
; Run: `pio test -e native` (all) or `pio test -e native -f <suite>` (one).
[env:native]
platform = native
test_framework = googletest
; Exercise the real Arduino GPS parser against the native Stream mock.
lib_compat_mode = off
build_flags = -std=c++17
-I src
-I test/mocks
-D OTA_FETCH_PIPELINE=4
-D OTA_TRANSPORT_DEFLATE_TEST=1
test_build_src = yes
test_ignore = test_kiss_modem, test_ota_channel
build_src_filter =
-<*>
+<../src/Utils.cpp>
+<../src/helpers/MQTTPayloadBuilder.cpp>
+<../src/Packet.cpp>
+<../src/Dispatcher.cpp>
+<../src/Identity.cpp>
+<../src/Mesh.cpp>
+<../src/helpers/TxtDataHelpers.cpp>
+<../src/helpers/StaticPoolPacketManager.cpp>
+<../src/helpers/FloodAdvertLimiter.cpp>
+<../src/helpers/ota/MerkleTree.cpp>
+<../src/helpers/ota/MotaContainer.cpp>
+<../src/helpers/ota/FirmwareInfo.cpp>
+<../src/helpers/ota/MotaSourceSerial.cpp>
+<../src/helpers/ota/FolderMotaStore.cpp>
+<../src/helpers/ota/OtaProtocol.cpp>
+<../src/helpers/ota/OtaManager.cpp>
+<../src/helpers/ota/OtaDeflate.cpp>
+<../src/helpers/ota/OtaTinf.c>
+<../src/helpers/ota/detools/detools.c>
+<../src/helpers/UserGpio.cpp>
+<../src/helpers/CompanionNotificationPolicy.cpp>
+<../src/helpers/ConfigSerializer.cpp>
+<../src/helpers/ArduinoSerialInterface.cpp>
+<../src/helpers/DynamicConfigSerializer.cpp>
+<../src/helpers/CommonRadioPrefs.cpp>
+<../src/helpers/ui/MomentaryButton.cpp>
lib_deps =
google/googletest @ 1.17.0
bblanchon/ArduinoJson @ 7.4.3
stevemarple/MicroNMEA @ 2.0.6
[env:native_kiss_modem]
platform = native
test_framework = googletest
build_flags = -std=c++17
-I test/mocks
-I src
-I examples/kiss_modem
test_build_src = yes
test_filter = test_kiss_modem
build_src_filter =
-<*>
+<../examples/kiss_modem/KissModem.cpp>
lib_deps =
google/googletest @ 1.17.0
[env:native_ota_channel]
platform = native
test_framework = googletest
build_flags = -std=c++17
-I test/mocks
-I src
-DOTA_MANIFEST_BASE="\"https://stable.example/mqtt/v\""
-DOTA_MANIFEST_BASE_STABLE="\"https://stable.example/mqtt/v\""
-DOTA_MANIFEST_BASE_DEV="\"https://dev.example/mqtt/dev/v\""
test_build_src = yes
test_filter = test_ota_channel
build_src_filter =
-<*>
lib_deps =
google/googletest @ 1.17.0
Reference in new issue View Git Blame Copy Permalink