Files
MeshCore/variants/xiao_s3/target.cpp
T
9d52b1fd68 Add saved LED controls across supported boards
Add get leds and set leds on|off for Companion, repeater, room server and
sensor builds. Preserve the setting across reboots and cover GPIO, RGB,
Bluetooth, notification and expander indicators without changing radio
amplifier controls or screen backlights.

RAK Companions blink while advertising and keep the Bluetooth LED off once
connected, including late timer callbacks.

Adapted from meshcore-dev/MeshCore#3605 and #2694.
Validated with host regressions and firmware builds for SenseCAP Solar,
RAK4631, T096, Heltec V4, T-Beam, Xiao S3, Pico W and Wio E5 Mini.

Co-authored-by: R0ck <develop@hectospark.co.uk>
Co-authored-by: Nick Dunklee <nick@dunklee.org>
2026-10-20 08:59:39 -07:00

43 lines
1.0 KiB
C++

#include <Arduino.h>
#include "target.h"
XiaoS3Board board;
#if defined(P_LORA_SCLK)
static SPIClass spi;
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
#else
RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
#endif
WRAPPER_CLASS radio_driver(radio, board);
ESP32RTCClock fallback_clock;
AutoDiscoverRTCClock rtc_clock(fallback_clock);
EnvironmentSensorManager sensors;
#ifdef DISPLAY_CLASS
DISPLAY_CLASS display;
MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
#endif
bool radio_init() {
fallback_clock.begin();
rtc_clock.begin(Wire);
digitalWrite(PIN_STATUS_LED, !LED_STATE_ON);
pinMode(PIN_STATUS_LED, OUTPUT);
pinMode(48, OUTPUT);
#if defined(P_LORA_SCLK)
spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
return radio.std_init(&spi);
#else
return radio.std_init();
#endif
}
mesh::LocalIdentity radio_new_identity() {
RadioNoiseListener rng(radio);
return mesh::LocalIdentity(&rng); // create new random identity
}