mjgodatandClaude Opus 5.5
5681898ad4
New variant variants/m5stack_cardputer_adv for the Cardputer-Adv (ESP32-S3, 8 MB) with the Cap LoRa-1262 (SX1262 + GNSS): - Envs: companion_radio_ble, companion_radio_usb, repeater, room_server. - Board: enables the Cap's antenna path via the PI4IOE5V6408 on the internal I2C bus (Wire1, G8/G9); Wire stays on the Grove port. LoRa and microSD share FSPI because the display owns SPI3. TCXO 1.8 V. - Companion UI adapted from MultiMote/meshcore-cardputer-adv (MIT, LICENSE.MultiMote), running on the standard companion so the USB terminal CLI stays available. Contacts/identity stay in internal SPIFFS; the microSD card is optional (chat history, keyboard layouts). - Sticky Shift, one-shot Fn with Fn+letter shortcuts, top button (G0) sends a flood advert, brightness control. - Text size setting (Normal/Large/Extra large) with DejaVu Sans fonts generated by tools/gen_vlw_font.py; layouts derive from the font size. - Power save maps to the companion's powersaving pref; the UI vetoes light sleep while the screen is on. Low-battery power-off at 3.4 V. - win_long_cmdline.py: Windows-only -iprefix include shortening so the ESP32 compile command stays under the 32,767-character limit. Shared companion changes are guarded by CARDPUTER_ADV_UI: main.cpp selects CardputerDataStore/CardputerUITask/CardputerMesh, and MyMesh.h maps the_mesh to the subclass like the PSRAM storage path does. Tested on hardware (910.525 MHz mesh): radio RX/TX, USB CLI, BLE, UI. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
42 lines
1.2 KiB
C++
42 lines
1.2 KiB
C++
#include <Arduino.h>
|
|
#include "target.h"
|
|
#include <helpers/radiolib/ESP32BufferedRadioHal.h>
|
|
|
|
CardputerAdvBoard board;
|
|
|
|
// FSPI (SPI2): the display owns SPI3 (HSPI, the SPIClass default on S3).
|
|
SPIClass lora_spi(FSPI);
|
|
static ESP32BufferedRadioHal radio_hal(lora_spi);
|
|
RADIO_CLASS radio = new Module(&radio_hal, P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
|
|
|
|
WRAPPER_CLASS radio_driver(radio, board);
|
|
|
|
ESP32RTCClock fallback_clock;
|
|
AutoDiscoverRTCClock rtc_clock(fallback_clock);
|
|
|
|
#if CARDPUTER_ADV_UI
|
|
#include <helpers/sensors/MicroNMEALocationProvider.h>
|
|
static MicroNMEALocationProvider nmea(Serial1, &rtc_clock);
|
|
CardputerSensorManager sensors(nmea);
|
|
CardputerDisplay display;
|
|
#else
|
|
EnvironmentSensorManager sensors;
|
|
#endif
|
|
|
|
bool radio_init() {
|
|
fallback_clock.begin();
|
|
rtc_clock.begin(Wire);
|
|
#ifdef PIN_SD_CS
|
|
// Keep the SD card deselected while the radio owns the shared bus.
|
|
pinMode(PIN_SD_CS, OUTPUT);
|
|
digitalWrite(PIN_SD_CS, HIGH);
|
|
#endif
|
|
lora_spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
|
|
return radio.std_init(&lora_spi);
|
|
}
|
|
|
|
mesh::LocalIdentity radio_new_identity() {
|
|
RadioNoiseListener rng(radio);
|
|
return mesh::LocalIdentity(&rng);
|
|
}
|