Files
MeshCore/variants/heltec_v4/platformio.ini
T
agessaman d14ec41301 feat(mqtt): add SNMP support for radio diagnostics and stats
Implement SNMP functionality in MyMesh to provide radio diagnostics
and statistics updates. This includes a new method for formatting
radio diagnostic replies and periodic updates to the SNMP agent
with radio stats, enhancing monitoring capabilities for users
with SNMP enabled.

(cherry picked from commit fbe608d6c0)
2026-07-21 12:06:42 -07:00

682 lines
19 KiB
INI

[Heltec_lora32_v4]
extends = esp32_base
board = heltec_v4
build_flags =
${esp32_base.build_flags}
${sensor_base.build_flags}
-I variants/heltec_v4
-D HELTEC_LORA_V4
-D USE_SX1262
-D ESP32_CPU_FREQ=80
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D P_LORA_TX_LED=35
-D P_LORA_DIO_1=14
-D P_LORA_NSS=8
-D P_LORA_RESET=12
-D P_LORA_BUSY=13
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D P_LORA_PA_POWER=7 ; // VFEM_Ctrl -LDO power enable
-D P_LORA_GC1109_PA_EN=2 ; // CSD - GC1109 chip enable (HIGH=on)
-D P_LORA_GC1109_PA_TX_EN=46 ;// CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
-D P_LORA_KCT8103L_PA_CSD=2
-D P_LORA_KCT8103L_PA_CTX=5
-D PIN_USER_BTN=0
-D PIN_VEXT_EN=36
-D PIN_VEXT_EN_ACTIVE=HIGH
-D LORA_TX_POWER=10 ;If it is configured as 10 here, the final output will be 22 dbm.
-D MAX_LORA_TX_POWER=22 ; Max SX1262 output
-D SX126X_REGISTER_PATCH=1 ; Patch register 0x8B5 for improved RX
-D SX126X_DIO2_AS_RF_SWITCH=true ; GC1109 CTX is controlled by SX1262 DIO2
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1 ; In some cases, commenting this out will improve RX
-D PIN_GPS_RX=38
-D PIN_GPS_TX=39
-D PIN_GPS_RESET=42
-D PIN_GPS_RESET_ACTIVE=LOW
-D PIN_GPS_EN=34
-D PIN_GPS_EN_ACTIVE=LOW
-D ENV_INCLUDE_GPS=1
-D PIN_ADC_CTRL=37
-D PIN_VBAT_READ=1
build_src_filter = ${esp32_base.build_src_filter}
+<../variants/heltec_v4>
+<helpers/sensors>
lib_deps =
${esp32_base.lib_deps}
${sensor_base.lib_deps}
[heltec_v4_oled]
extends = Heltec_lora32_v4
build_flags =
${Heltec_lora32_v4.build_flags}
-D HELTEC_LORA_V4_OLED
-D PIN_BOARD_SDA=17
-D PIN_BOARD_SCL=18
-D PIN_OLED_RESET=21
build_src_filter= ${Heltec_lora32_v4.build_src_filter}
lib_deps = ${Heltec_lora32_v4.lib_deps}
[heltec_v4_tft]
extends = Heltec_lora32_v4
build_flags =
${Heltec_lora32_v4.build_flags}
-D HELTEC_LORA_V4_TFT
-D PIN_BOARD_SDA=4
-D PIN_BOARD_SCL=3
-D DISPLAY_SCALE_X=2.5
-D DISPLAY_SCALE_Y=3.75
-D PIN_TFT_RST=18
-D PIN_TFT_VDD_CTL=-1
-D PIN_TFT_LEDA_CTL=21
-D PIN_TFT_LEDA_CTL_ACTIVE=HIGH
-D PIN_TFT_CS=15
-D PIN_TFT_DC=16
-D PIN_TFT_SCL=17
-D PIN_TFT_SDA=33
build_src_filter= ${Heltec_lora32_v4.build_src_filter}
lib_deps =
${Heltec_lora32_v4.lib_deps}
adafruit/Adafruit ST7735 and ST7789 Library @ ^1.11.0
[env:heltec_v4_repeater]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:heltec_v4_expansionkit_repeater]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D ENV_PIN_SDA=4
-D ENV_PIN_SCL=3
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:heltec_v4_repeater_bridge_espnow]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_repeater_observer_mqtt]
extends = heltec_v4_oled
extra_scripts =
${esp32_base.extra_scripts}
pre:scripts/generate_cert_bundle.py
board_ssl_cert_source = adafruit-full
board_build.embed_files = src/certs/x509_crt_bundle.bin
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"MQTT Observer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_BRIDGE=1
-D OTA_MANIFEST_BASE='"https://observer.gessaman.com/v"'
-D MAX_MQTT_BROKERS=3
-D MQTT_MAX_PACKET_SIZE=1024
-D MQTT_DEBUG=1
; -D MQTT_MEMORY_DEBUG=1
; Keep default observer profile less verbose to reduce runtime contention.
; Use heltec_v4_repeater_observer_mqtt_debug for deep troubleshooting.
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-D ESP32_CPU_FREQ=160
-D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
-D WITH_SNMP=1
# -D WIFI_SSID='"ssid"'
# -D WIFI_PWD='"password"'
# -D MQTT_SERVER='"your-mqtt-broker.com"'
# -D MQTT_PORT=1883
# -D MQTT_USERNAME='"your-username"'
# -D MQTT_PASSWORD='"your-password"'
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/bridges/MQTTBridge.cpp>
+<helpers/MQTTMessageBuilder.cpp>
+<helpers/JWTHelper.cpp>
+<helpers/SNMPAgent.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
elims/PsychicMqttClient@^0.2.4
bblanchon/ArduinoJson
arduino-libraries/NTPClient
JChristensen/Timezone
paulstoffregen/Time@1.6.1
0neblock/SNMP_Agent
[env:heltec_v4_expansionkit_repeater_observer_mqtt]
extends = heltec_v4_oled
extra_scripts =
${esp32_base.extra_scripts}
pre:scripts/generate_cert_bundle.py
board_ssl_cert_source = adafruit-full
board_build.embed_files = src/certs/x509_crt_bundle.bin
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"MQTT Observer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_MQTT_BRIDGE=1
-D OTA_MANIFEST_BASE='"https://observer.gessaman.com/v"'
-D MAX_MQTT_BROKERS=3
-D MQTT_MAX_PACKET_SIZE=1024
-D MQTT_DEBUG=1
; -D MQTT_MEMORY_DEBUG=1
; Keep default observer profile less verbose to reduce runtime contention.
; Use heltec_v4_repeater_observer_mqtt_debug for deep troubleshooting.
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-D ESP32_CPU_FREQ=160
-D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
-D WITH_SNMP=1
-D ENV_PIN_SDA=4
-D ENV_PIN_SCL=3
# -D WIFI_SSID='"ssid"'
# -D WIFI_PWD='"password"'
# -D MQTT_SERVER='"your-mqtt-broker.com"'
# -D MQTT_PORT=1883
# -D MQTT_USERNAME='"your-username"'
# -D MQTT_PASSWORD='"your-password"'
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/bridges/MQTTBridge.cpp>
+<helpers/MQTTMessageBuilder.cpp>
+<helpers/JWTHelper.cpp>
+<helpers/SNMPAgent.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
elims/PsychicMqttClient@^0.2.4
bblanchon/ArduinoJson
arduino-libraries/NTPClient
JChristensen/Timezone
paulstoffregen/Time@1.6.1
0neblock/SNMP_Agent
#[env:heltec_v4_repeater_observer_mqtt_debug]
#extends = heltec_v4_oled
#extra_scripts =
# ${esp32_base.extra_scripts}
# pre:scripts/generate_cert_bundle.py
#board_ssl_cert_source = adafruit-full
#board_build.embed_files = src/certs/x509_crt_bundle.bin
#build_flags =
# ${env:heltec_v4_repeater_observer_mqtt.build_flags}
# -D MQTT_MEMORY_DEBUG=1
# -D MESH_PACKET_LOGGING=1
# -D MESH_DEBUG=1
#build_src_filter = ${env:heltec_v4_repeater_observer_mqtt.build_src_filter}
#lib_deps =
# ${env:heltec_v4_repeater_observer_mqtt.lib_deps}
#[env:heltec_v4_repeater_observer_mqtt_quiet]
#extends = heltec_v4_oled
#extra_scripts =
# ${esp32_base.extra_scripts}
# pre:scripts/generate_cert_bundle.py
#board_ssl_cert_source = adafruit-full
#board_build.embed_files = src/certs/x509_crt_bundle.bin
#build_flags =
# ${env:heltec_v4_repeater_observer_mqtt.build_flags}
#build_unflags =
# -D MQTT_DEBUG=1
# -D MQTT_MEMORY_DEBUG=1
#build_src_filter = ${env:heltec_v4_repeater_observer_mqtt.build_src_filter}
#lib_deps =
# ${env:heltec_v4_repeater_observer_mqtt.lib_deps}
#[env:heltec_v4_repeater_observer_mqtt_quiet_keepalive45]
#extends = heltec_v4_oled
#extra_scripts =
# ${esp32_base.extra_scripts}
# pre:scripts/generate_cert_bundle.py
#board_ssl_cert_source = adafruit-full
#board_build.embed_files = src/certs/x509_crt_bundle.bin
#build_flags =
# ${env:heltec_v4_repeater_observer_mqtt.build_flags}
# -D MQTT_FORCE_KEEPALIVE_45=1
#build_unflags =
# -D MQTT_DEBUG=1
# -D MQTT_MEMORY_DEBUG=1
#build_src_filter = ${env:heltec_v4_repeater_observer_mqtt.build_src_filter}
#lib_deps =
# ${env:heltec_v4_repeater_observer_mqtt.lib_deps}
[env:heltec_v4_room_server_observer_mqtt]
extends = heltec_v4_oled
extra_scripts =
${esp32_base.extra_scripts}
pre:scripts/generate_cert_bundle.py
board_ssl_cert_source = adafruit-full
board_build.embed_files = src/certs/x509_crt_bundle.bin
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Room Observer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
-D WITH_MQTT_BRIDGE=1
-D MAX_NEIGHBOURS=50
-D OTA_MANIFEST_BASE='"https://observer.gessaman.com/v"'
-D MAX_MQTT_BROKERS=3
-D MQTT_MAX_PACKET_SIZE=1024
-D MQTT_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-D ESP32_CPU_FREQ=160
-D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
-D WITH_SNMP=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/bridges/MQTTBridge.cpp>
+<helpers/MQTTMessageBuilder.cpp>
+<helpers/JWTHelper.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/SNMPAgent.cpp>
+<../examples/simple_room_server>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
elims/PsychicMqttClient@^0.2.4
bblanchon/ArduinoJson
arduino-libraries/NTPClient
JChristensen/Timezone
paulstoffregen/Time@1.6.1
0neblock/SNMP_Agent
[env:heltec_v4_expansionkit_room_server_observer_mqtt]
extends = heltec_v4_oled
extra_scripts =
${esp32_base.extra_scripts}
pre:scripts/generate_cert_bundle.py
board_ssl_cert_source = adafruit-full
board_build.embed_files = src/certs/x509_crt_bundle.bin
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Room Observer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
-D WITH_MQTT_BRIDGE=1
-D MAX_NEIGHBOURS=50
-D OTA_MANIFEST_BASE='"https://observer.gessaman.com/v"'
-D MAX_MQTT_BROKERS=3
-D MQTT_MAX_PACKET_SIZE=1024
-D MQTT_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
-D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
-D ESP32_CPU_FREQ=160
-D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm
-D ENV_PIN_SDA=4
-D ENV_PIN_SCL=3
-D WITH_SNMP=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/bridges/MQTTBridge.cpp>
+<helpers/MQTTMessageBuilder.cpp>
+<helpers/JWTHelper.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/SNMPAgent.cpp>
+<../examples/simple_room_server>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
elims/PsychicMqttClient@^0.2.4
bblanchon/ArduinoJson
arduino-libraries/NTPClient
JChristensen/Timezone
paulstoffregen/Time@1.6.1
0neblock/SNMP_Agent
[env:heltec_v4_room_server]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Heltec Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_terminal_chat]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_usb]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_ble]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D AUTO_SHUTDOWN_MILLIVOLTS=3400
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_companion_radio_wifi]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
-D DISPLAY_CLASS=SSD1306Display
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_oled.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_sensor]
extends = heltec_v4_oled
build_flags =
${heltec_v4_oled.build_flags}
-D ADVERT_NAME='"Heltec v4 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ENV_PIN_SDA=3
-D ENV_PIN_SCL=4
-D DISPLAY_CLASS=SSD1306Display
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_oled.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>
lib_deps =
${heltec_v4_oled.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_repeater]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"Heltec Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:heltec_v4_tft_repeater_bridge_espnow]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_repeater>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_room_server]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D DISPLAY_CLASS=ST7789LCDDisplay
-D ADVERT_NAME='"Heltec Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_room_server>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_tft_terminal_chat]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_usb]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=ST7789LCDDisplay
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_ble]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=ST7789LCDDisplay
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456 ; dynamic, random PIN
-D AUTO_SHUTDOWN_MILLIVOLTS=3400
-D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_companion_radio_wifi]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D OFFLINE_QUEUE_SIZE=256
-D DISPLAY_CLASS=ST7789LCDDisplay
-D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${heltec_v4_tft.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:heltec_v4_tft_sensor]
extends = heltec_v4_tft
build_flags =
${heltec_v4_tft.build_flags}
-D ADVERT_NAME='"Heltec v4 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ENV_PIN_SDA=3
-D ENV_PIN_SCL=4
-D DISPLAY_CLASS=ST7789LCDDisplay
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${heltec_v4_tft.build_src_filter}
+<helpers/ui/ST7789LCDDisplay.cpp>
+<../examples/simple_sensor>
lib_deps =
${heltec_v4_tft.lib_deps}
${esp32_ota.lib_deps}
[env:heltec_v4_kiss_modem]
extends = Heltec_lora32_v4
build_src_filter = ${Heltec_lora32_v4.build_src_filter}
+<../examples/kiss_modem/>