Files
MeshCore/variants/rak4631/platformio.ini
T
mikecarper d5a6df6283 Detect SSD1306 and SH1106 screens on RAK boards
Use repeated status reads at screen initialization and preserve SSD1306 for ambiguous responses. Share the existing framebuffer, drawing, rotation and power handling; use SH1106 page transfers when detected.

Enable this for RAK4631 and RAK3401, including WisMesh Pocket v2/v3. Add controller overrides, protocol tests and CI coverage. Addresses meshcore-dev/MeshCore#3296.
2026-10-20 09:43:25 -07:00

563 lines
19 KiB
INI

[rak4631]
extends = nrf52_base
board = rak4631
board_check = true
board_build.ldscript = boards/nrf52840_s140_v6.ld
extra_scripts = ${nrf52_base.extra_scripts}
post:variants/rak4631/fix_bsec_lib.py
post:tools/mota/pio_endf.py ; EndF trailer for OTA self-identity (all RAK4631 roles)
build_flags = ${nrf52_base.build_flags}
${sensor_base.build_flags}
-I variants/rak4631
-D RAK_4631
-D RAK_BOARD
-D NRF52_POWER_MANAGEMENT
-D MOTA_HW_ID='"RAK4631"' ; OTA hardware tag (apply refuses a .mota for different hw)
-D PIN_BOARD_SCL=14
-D PIN_BOARD_SDA=13
; Saved peripherals.mode defaults to gps-only; shared keeps WB_IO2 alive.
; The boot power policy automatically protects Ethernet/PoE and external NOR.
-D PIN_GPS_EN=-1
-D PIN_OLED_RESET=-1
-D OLED_AUTO_DETECT=1 ; SSD1306 / SH1106, including WisMesh Pocket v2 and v3
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D ENV_INCLUDE_RAK12035=1
-UENV_INCLUDE_BME680
-D ENV_INCLUDE_BME680_BSEC=1
-D ENABLE_OTA=1 ; LoRa OTA on every RAK4631 role (single-slot, bootloader-applied)
-D OTA_FLASH_STORE=1 ; stage the received .mota in flash (survives reboot into the bootloader)
-D OTA_FOLDER_SERIAL ; `ota folder on` relays a host folder of .mota over the USB console (no extra HW)
build_src_filter = ${nrf52_base.build_src_filter}
+<../variants/rak4631>
+<helpers/sensors>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/ota/*.cpp>
lib_deps =
${nrf52_base.lib_deps}
${sensor_base.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
boschsensortec/BSEC Software Library @ ^1.8.1492
[env:RAK_4631_repeater]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Cascade repeater image exceeds the safe nRF52 in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
-D WITH_RS232_BRIDGE_ALT=Serial1
-D WITH_RS232_BRIDGE_ALT_UART=1
-D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX
-D RS232_BRIDGE_MERGED=1
-D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1
; -D OTA_DEBUG=1 ; bring-up: trace OTA fetch (REQ / block / page-flush) over Serial
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
; Shared sources remain inherited, but ENABLE_OTA is explicitly undefined for this oversized role.
+<../examples/simple_repeater>
lib_deps =
${rak4631.lib_deps}
; Full/Reduced OTA pairs compile this feature-rich base, not their named
; reduced sibling. Keep the optional SD dependency available to its overlay.
${nrf52_rak15002_sd_store.lib_deps}
; Full-sensor/GPS repeater for a RAK4631 fitted with a 2 MiB RAK15001 in sensor
; slot C. Its WP#/HOLD# inputs have onboard pull-ups, so firmware does not drive
; slot GPIO. Do not use this target with RAK13800 Ethernet, RAK15002 SD, or
; another SPI module.
[env:RAK_4631_repeater_rak15001_slot_c_lora_ota]
extends = rak4631
build_unflags =
-D MOTA_HW_ID='"RAK4631"'
-D OTA_FLASH_STORE=1
build_flags =
${rak4631.build_flags}
${nrf52_rak15001_ota.build_flags}
-D MOTA_HW_ID='"RAK4631_RAK15001_C"'
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 + RAK15001 OTA"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
; Full-sensor/GPS repeater with an exact 2 MiB Winbond W25Q16JV breakout. The
; flash shares the RAK19007 SPI clock/data nets, uses its own CS on J11 AIN1,
; and does not occupy a sensor slot. The RAK4631 radio has a separate internal
; SPI bus. A matching exact-EF4015 OTAFIX bootloader is required.
[env:RAK_4631_repeater_w25q16_lora_ota]
extends = rak4631
build_unflags =
-D MOTA_HW_ID='"RAK4631"'
-D OTA_FLASH_STORE=1
build_flags =
${rak4631.build_flags}
${nrf52_wisblock_w25q16_ota.build_flags}
-D MOTA_HW_ID='"RAK4631_W25Q16"'
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 + W25Q16 OTA"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
; One full-sensor repeater image selects internal flash, qualified NOR, or an
; inserted RAK15002 card. The matching OTAFIX bootloader for the selected
; internal/NOR handoff is still required.
[env:RAK_4631_repeater_unified_lora_ota]
extends = rak4631
build_flags =
${rak4631.build_flags}
${nrf52_rak4631_unified_ota.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
-D WITH_RS232_BRIDGE_ALT=Serial1
-D WITH_RS232_BRIDGE_ALT_UART=1
-D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX
-D RS232_BRIDGE_MERGED=1
-D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
lib_deps =
${rak4631.lib_deps}
${nrf52_rak4631_unified_ota.lib_deps}
; Shared reduced RAK4631 repeater recipe. The old cache-only SD seeder uses
; this pre-adaptive base so its strict source-only contract cannot inherit the
; receiver's internal/NOR/SD STORE flags.
[rak4631_repeater_reduced_ota_base]
extra_scripts = ${nrf52_lora_ota.extra_scripts}
build_flags =
${rak4631.build_flags}
${nrf52_reduced_sensors_keep_ina_gps.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 LoRa OTA No Ext Sensors"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
-D WITH_RS232_BRIDGE_ALT=Serial1
-D WITH_RS232_BRIDGE_ALT_UART=1
-D WITH_RS232_BRIDGE_ALT_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_ALT_TX=PIN_SERIAL1_TX
-D RS232_BRIDGE_MERGED=1
-D WITH_RS232_BRIDGE_GPS_CONFLICT_UART=1
build_src_filter = ${nrf52_lora_ota.build_src_filter}
+<../variants/rak4631>
+<helpers/sensors/EnvironmentSensorManager.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_reduced_sensors_keep_ina_gps.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
; Lean OTA target for space-constrained RAK4631 repeaters. This removes optional external
; environmental sensor packages while retaining the common INA I2C voltage/current monitors and
; RAK12500/RAK12501 GPS support. The legacy no_external_sensors target name remains stable for OTA
; compatibility. RAK4631Board::getBattMilliVolts(), repeater telemetry, and battery.alert remain part
; of the board/repeater sources below.
; RAK12500 and the configured INA3221 both use I2C address 0x42. When both are required, keep GPS at
; 0x42, strap INA3221 A0 to SCL for 0x43, and build with -DTELEM_INA3221_ADDRESS=0x43.
[env:RAK_4631_repeater_lora_ota_no_external_sensors]
extends = rak4631
extra_scripts = ${rak4631_repeater_reduced_ota_base.extra_scripts}
build_flags =
${rak4631_repeater_reduced_ota_base.build_flags}
${nrf52_rak4631_unified_ota.build_flags}
build_src_filter = ${rak4631_repeater_reduced_ota_base.build_src_filter}
lib_deps =
${rak4631_repeater_reduced_ota_base.lib_deps}
${nrf52_rak4631_unified_ota.lib_deps}
; Experimental exact RAK15002 IO-slot SD archive. This is source-only: it
; caches/serves peer mOTAs but never installs an application or bootloader.
; Keep the ordinary reduced sensor/GPS/OLED/BLE features; do not substitute it
; for a receiver in the automatic Full/Reduced OTA release matrix.
[env:RAK_4631_repeater_rak15002_sd_seeder_only]
extends = env:RAK_4631_repeater_lora_ota_no_external_sensors
; Its parent now carries the adaptive receiver recipe. Keep this historical
; cache-only archive exactly source-only and mutually exclusive with it.
build_unflags =
${nrf52_base.build_unflags}
-D OTA_RAK_AUTO_STORE=1
-D OTA_QSPI_STORE=1
-D OTA_RAK15002_SD_STORE=1
build_flags =
${rak4631_repeater_reduced_ota_base.build_flags}
-UOTA_FLASH_STORE
-D OTA_SEEDER_ONLY=1
-D OTA_SD_STORE=1
-D OTA_RAK15002_SD_CACHE=1
-D OTA_SD_CS_PIN=26
-D OTA_SD_SCK_MHZ=4
-D OTA_SD_CACHE_MAX=16
-D OTA_MAX_SERVE=24
-D OTA_HEAP_CONTEXT=1
-UADVERT_NAME
-D ADVERT_NAME='"RAK4631 SD Seeder"'
lib_deps =
${rak4631_repeater_reduced_ota_base.lib_deps}
https://github.com/greiman/SdFat-beta.git#a249cfa121e25a96ee14d8813abf01755f1f6a25
[env:RAK_4631_repeater_ethernet]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Ethernet image exceeds the safe nRF52 in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D ETHERNET_ENABLED=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${rak4631.lib_deps}
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
[env:RAK_4631_repeater_bridge_rs232_serial1]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial1
-D WITH_RS232_BRIDGE_UART=1
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX
-UENV_INCLUDE_GPS
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D CORE_DEBUG_LEVEL=3
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
; Explicit lean alternative to the full-sensor, non-OTA Serial1 bridge above. GPS remains disabled:
; both the RAK12501 and this bridge require Serial1, so enabling both would corrupt both protocols.
[env:RAK_4631_repeater_bridge_rs232_serial1_lora_ota_no_external_sensors]
extends = rak4631
build_flags =
${rak4631.build_flags}
${nrf52_reduced_sensors_keep_ina.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial1
-D WITH_RS232_BRIDGE_UART=1
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_reduced_sensors_keep_ina.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
[env:RAK_4631_repeater_bridge_rs232_serial2]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
-UENV_INCLUDE_GPS
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D CORE_DEBUG_LEVEL=3
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
; Explicit lean alternative to the full-sensor, non-OTA Serial2 bridge above. GPS remains available
; on Serial1 because this bridge owns Serial2.
[env:RAK_4631_repeater_bridge_rs232_serial2_lora_ota_no_external_sensors]
extends = rak4631
build_flags =
${rak4631.build_flags}
${nrf52_reduced_sensors_keep_ina_gps.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
-D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_reduced_sensors_keep_ina_gps.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
[env:RAK_4631_room_server]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"Test Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${rak4631.lib_deps}
${nrf52_rak15002_sd_store.lib_deps}
[env:RAK_4631_room_server_ethernet]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Ethernet image exceeds the safe nRF52 in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Room Server"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
-D ETHERNET_ENABLED=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${rak4631.lib_deps}
${nrf52_rak15002_sd_store.lib_deps}
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
[env:RAK_4631_companion_radio_usb]
extends = rak4631
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${rak4631.build_flags}
-I examples/companion_radio/ui-new
-D PIN_USER_BTN=9
-D PIN_USER_BTN_ANA=31
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D MESH_CONTACT_CACHE=1
-D ENABLE_USB_INTERFACE
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak4631.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_4631_companion_radio_ethernet]
extends = rak4631
board_build.ldscript = boards/nrf52840_s140_v6.ld
board_upload.maximum_size = 712704
build_unflags =
-D EXTRAFS=1
build_flags =
${rak4631.build_flags}
-I examples/companion_radio/ui-new
-D PIN_USER_BTN=9
-D PIN_USER_BTN_ANA=31
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D ETHERNET_ENABLED=1
-D ETHERNET_USE_RAK13800
-D ETHERNET_CLASS=RAK13800EthernetInterface
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
; -D ETHERNET_DEBUG_LOGGING=1
build_src_filter = ${rak4631.build_src_filter}
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
+<helpers/ethernet/*.cpp>
+<helpers/ethernet/RAK13800/>
lib_deps =
${rak4631.lib_deps}
densaugeo/base64 @ ~1.4.0
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
[env:RAK_4631_companion_radio_full]
extends = env:RAK_4631_companion_radio_usb
build_flags =
${env:RAK_4631_companion_radio_usb.build_flags}
; Optional RAK15002 source/cache. Runtime arbitration keeps the shared
; WisBlock IO slot safe when RAK13800 Ethernet is also compiled.
${nrf52_rak15002_sd_store.build_flags}
-D ETHERNET_ENABLED=1
-D ETHERNET_USE_RAK13800
-D ETHERNET_CLASS=RAK13800EthernetInterface
-D MESHCORE_REQUIRES_COMPANION_RADIO_FULL=1
build_src_filter = ${env:RAK_4631_companion_radio_usb.build_src_filter}
+<helpers/ethernet/*.cpp>
+<helpers/ethernet/RAK13800/>
lib_deps =
${env:RAK_4631_companion_radio_usb.lib_deps}
${nrf52_rak15002_sd_store.lib_deps}
https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
[env:RAK_4631_companion_radio_ble]
extends = rak4631
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${rak4631.build_flags}
-I examples/companion_radio/ui-new
-D PIN_USER_BTN=9
-D PIN_USER_BTN_ANA=31
-D DISPLAY_CLASS=SSD1306Display
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D MESH_CONTACT_CACHE=1
-D BLE_PIN_CODE=123456
; -D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${rak4631.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_4631_terminal_chat]
extends = rak4631
build_flags =
${rak4631.build_flags}
-D PIN_USER_BTN=9
-D PIN_USER_BTN_ANA=31
-D MAX_CONTACTS=100
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${rak4631.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:RAK_4631_sensor]
extends = rak4631
build_flags =
${rak4631.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full sensor image exceeds the safe nRF52 in-place OTA ceiling
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RAK4631 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D USER_GPIO_CONTROL=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${rak4631.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>
lib_deps =
${rak4631.lib_deps}
${nrf52_rak15002_sd_store.lib_deps}
[env:RAK_4631_kiss_modem]
extends = rak4631
build_flags =
${rak4631.build_flags}
build_src_filter = ${rak4631.build_src_filter}
+<../examples/kiss_modem/>
lib_deps =
${rak4631.lib_deps}