rich/MeshCore
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
285267e3a1d9ae8e2ecddbbf9b2d31317c4de708
MeshCore/variants/mke_s3/platformio.ini
T

244 lines
6.2 KiB
INI
Raw Blame History

; https://github.com/makereduvn/MKE-K01-ESP32-S3-DEV-KIT
[MKE_s3]
extends = esp32_base
board = esp32-s3-devkitc-1
build_flags =
${esp32_base.build_flags}
${sensor_base.build_flags}
-I variants/mke_s3
-D MKE_S3
-D ESP32_CPU_FREQ=80
; First heading
-D P_LORA_NSS=14
-D P_LORA_MOSI=13
-D P_LORA_MISO=12
-D P_LORA_SCLK=11
-D P_LORA_BUSY=10
; Second heading
; GND
; 3.3v
-D P_LORA_RESET=5
-D P_LORA_DIO_1=4
-D USE_SX1262
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
; -D P_LORA_TX_LED=48 ; RGB LED
-D PIN_BOARD_SDA=8
-D PIN_BOARD_SCL=9
-D PIN_USER_BTN=0
; -D PIN_VEXT_EN=36
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=0 ; Ra01SH uses XTAL
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=47
-D PIN_GPS_TX=48
-D PIN_GPS_EN=26
build_src_filter = ${esp32_base.build_src_filter}
+<../variants/mke_s3>
+<helpers/sensors>
lib_deps =
${esp32_base.lib_deps}
${sensor_base.lib_deps}
[env:MKE_s3_repeater]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"MKE Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; Runtime bridge is off until enabled with `set bridge.enabled on`.
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
; GPIO5 is the LoRa reset line; keep the bridge on GPIO16/17.
-D WITH_RS232_BRIDGE_RX=16
-D WITH_RS232_BRIDGE_TX=17
-D RS232_BRIDGE_MERGED=1
-D WITH_ESPNOW_BRIDGE=1
-D ESPNOW_BRIDGE_MERGED=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${MKE_s3.lib_deps}
${esp32_ota.lib_deps}
bakercp/CRC32 @ ^2.0.0
[env:MKE_s3_repeater_bridge_rs232]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
; Wire the bridge UART to GPIO16/17; GPIO5 is the LoRa reset line.
-D WITH_RS232_BRIDGE_RX=16
-D WITH_RS232_BRIDGE_TX=17
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${MKE_s3.lib_deps}
${esp32_ota.lib_deps}
[env:MKE_s3_repeater_bridge_espnow]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"ESPNow Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_ESPNOW_BRIDGE=1
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<helpers/bridges/ESPNowBridge.cpp>
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_repeater>
lib_deps =
${MKE_s3.lib_deps}
${esp32_ota.lib_deps}
[env:MKE_s3_room_server]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-D DISPLAY_CLASS=SSD1306Display
-D ADVERT_NAME='"MKE RoomServer"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_room_server>
lib_deps =
${MKE_s3.lib_deps}
${esp32_ota.lib_deps}
[env:MKE_s3_terminal_chat]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<../examples/simple_secure_chat/main.cpp>
lib_deps =
${MKE_s3.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:MKE_s3_companion_radio_usb]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
-D ENABLE_USB_INTERFACE
; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1
; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${MKE_s3.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:MKE_s3_companion_radio_ble]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
-D BLE_PIN_CODE=123456 ; fixed PIN if display is not detected
-D AUTO_SHUTDOWN_MILLIVOLTS=3400
; -D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${MKE_s3.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:MKE_s3_companion_radio_wifi]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D DISPLAY_CLASS=SSD1306Display
; -D WIFI_DEBUG_LOGGING=1
-D WIFI_SSID='"myssid"'
-D WIFI_PWD='"mypwd"'
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/esp32/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${MKE_s3.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:MKE_s3_sensor]
extends = MKE_s3
build_flags =
${MKE_s3.build_flags}
-D ADVERT_NAME='"MKE Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ENV_PIN_SDA=33
-D ENV_PIN_SCL=34
-D DISPLAY_CLASS=SSD1306Display
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${MKE_s3.build_src_filter}
+<helpers/ui/SSD1306Display.cpp>
+<../examples/simple_sensor>
lib_deps =
${MKE_s3.lib_deps}
${esp32_ota.lib_deps}
Reference in new issue View Git Blame Copy Permalink