rich/MeshCore
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
285267e3a1d9ae8e2ecddbbf9b2d31317c4de708
MeshCore/variants/heltec_t114/platformio.ini
T
mikecarper a60a6a1f60 Merge PowerSaving-v17 and harden noise calibration and RX recovery 
Port the measured RXPS model without changing Cascade wire preambles or automatically enabling experimental levels. Use a spaced weighted median with bounded calibration windows, preserve packet ownership across CAD, and check actual SX126x receive mode before recovery.

Preserve Cascade sleep and radio fixes, integrate the new sensor and board profiles, and correct BSEC script inheritance and the MKE UART pin conflict. Native regressions, production-method/SPI harnesses, and ESP32, nRF52, and STM32 builds pass. Hardware comparison and fault-injection validation are recorded privately.
2026-09-10 13:19:22 -07:00

318 lines
9.2 KiB
INI
Raw Blame History

;
; Heltec T114 without display
;
[Heltec_t114]
extends = rak4631_hw
board = heltec_t114
board_build.ldscript = boards/nrf52840_s140_v6.ld
build_flags = ${rak4631_hw.build_flags}
${sensor_base.build_flags}
-D MOTA_HW_ID='"Heltec_t114"' ; OTA hardware tag (apply refuses a .mota built for other hardware)
-I lib/nrf52/s140_nrf52_6.1.1_API/include
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
-I variants/heltec_t114
-I src/helpers/ui
-D HELTEC_T114
-D NRF52_POWER_MANAGEMENT
-D P_LORA_DIO_1=20
-D P_LORA_NSS=24
-D P_LORA_RESET=25
-D P_LORA_BUSY=17
-D P_LORA_SCLK=19
-D P_LORA_MISO=23
-D P_LORA_MOSI=22
-D P_LORA_TX_LED=35
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D LORA_TX_POWER=22
-D SX126X_POWER_EN=37
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_GPS_RX=39
-D PIN_GPS_TX=37
-D PIN_GPS_EN=21
-D PIN_GPS_RESET=38
-D PIN_GPS_RESET_ACTIVE=LOW
-D ENV_PIN_SDA=PIN_WIRE1_SDA
-D ENV_PIN_SCL=PIN_WIRE1_SCL
build_src_filter = ${rak4631_hw.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<../variants/heltec_t114>
lib_deps =
${rak4631_hw.lib_deps}
${sensor_base.lib_deps}
debug_tool = jlink
upload_protocol = nrfutil
[env:Heltec_t114_without_display_repeater]
extends = Heltec_t114
build_src_filter = ${Heltec_t114.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
build_flags =
${Heltec_t114.build_flags}
-D ADVERT_NAME='"Heltec_T114 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
-D RS232_BRIDGE_MERGED=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
[env:Heltec_t114_without_display_repeater_bridge_rs232]
extends = Heltec_t114
build_flags =
${Heltec_t114.build_flags}
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t114.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
[env:Heltec_t114_without_display_room_server]
extends = Heltec_t114
build_src_filter = ${Heltec_t114.build_src_filter}
+<../examples/simple_room_server>
build_flags =
${Heltec_t114.build_flags}
-D ADVERT_NAME='"Heltec_T114 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
[env:Heltec_t114_without_display_companion_radio_ble]
extends = Heltec_t114
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${Heltec_t114.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=NullDisplayDriver
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
; -D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t114.build_src_filter}
+<helpers/ui/NullDisplayDriver.cpp>
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_t114.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Heltec_t114_without_display_companion_radio_usb]
extends = Heltec_t114
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${Heltec_t114.build_flags}
-I examples/companion_radio/ui-new
-D DISPLAY_CLASS=NullDisplayDriver
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D ENABLE_USB_INTERFACE
build_src_filter = ${Heltec_t114.build_src_filter}
+<helpers/nrf52/*.cpp>
+<helpers/ui/NullDisplayDriver.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_t114.lib_deps}
densaugeo/base64 @ ~1.4.0
;
; Heltec T114 with ST7789 display
;
[Heltec_t114_with_display]
extends = Heltec_t114
board = heltec_t114
board_build.ldscript = boards/nrf52840_s140_v6.ld
build_flags = ${Heltec_t114.build_flags}
-D ST7789
-D HELTEC_T114_WITH_DISPLAY
-D DISPLAY_CLASS=ST7789Display
build_src_filter = ${Heltec_t114.build_src_filter}
+<helpers/ui/ST7789Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
+<helpers/ui/OLEDDisplay.cpp>
+<helpers/ui/OLEDDisplayFonts.cpp>
lib_deps =
${Heltec_t114.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
debug_tool = jlink
upload_protocol = nrfutil
[env:Heltec_t114_repeater]
extends = Heltec_t114_with_display
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
build_flags =
${Heltec_t114_with_display.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D ADVERT_NAME='"Heltec_T114 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
-D RS232_BRIDGE_MERGED=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
; Explicit lean alternative to the full-sensor, non-OTA repeater above.
[env:Heltec_t114_repeater_lora_ota_no_external_sensors]
extends = Heltec_t114_with_display
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
build_flags =
${Heltec_t114_with_display.build_flags}
${nrf52_no_external_sensors_keep_gps.build_flags}
-D ENV_INCLUDE_GPS=1 ; onboard GPS remains available in the lean LoRa-OTA build
-D ADVERT_NAME='"Heltec_T114 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
-D RS232_BRIDGE_MERGED=1
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_no_external_sensors_keep_gps.lib_deps}
adafruit/Adafruit SSD1306 @ ^2.5.13
[env:Heltec_t114_repeater_bridge_rs232]
extends = Heltec_t114
build_flags =
${Heltec_t114.build_flags}
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
[env:Heltec_t114_room_server]
extends = Heltec_t114_with_display
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
+<../examples/simple_room_server>
build_flags =
${Heltec_t114_with_display.build_flags}
-D ADVERT_NAME='"Heltec_T114 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
[env:Heltec_t114_companion_radio_ble]
extends = Heltec_t114_with_display
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${Heltec_t114_with_display.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D ENV_INCLUDE_GPS=1 ; enable the GPS page in UI
; -D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_t114_with_display.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Heltec_t114_companion_radio_usb]
extends = Heltec_t114_with_display
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${Heltec_t114_with_display.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D ENABLE_USB_INTERFACE
; -D BLE_PIN_CODE=123456
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
+<helpers/nrf52/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_t114_with_display.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Heltec_t114_kiss_modem]
extends = Heltec_t114
build_src_filter = ${Heltec_t114.build_src_filter}
+<../examples/kiss_modem/>
[env:Heltec_t114_sensor]
extends = Heltec_t114_with_display
build_src_filter = ${Heltec_t114_with_display.build_src_filter}
+<../examples/simple_sensor>
build_flags =
${Heltec_t114_with_display.build_flags}
-D ADVERT_NAME='"Heltec_T114 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
Reference in new issue View Git Blame Copy Permalink