rich/MeshCore
1
0 Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
285267e3a1d9ae8e2ecddbbf9b2d31317c4de708
MeshCore/variants/heltec_t096/platformio.ini
T

264 lines
8.5 KiB
INI
Raw Blame History

[Heltec_t096]
; nRF52840 (same SoftDevice S140 v6 + flash geometry as the RAK4631), so it reuses the shared
; rak4631_hw OTA recipe (ENABLE_OTA + OtaFlashLayout_nrf52.h). With the OTAFIX bootloader (oltaco
; PR #42 adds the T096 board) it can apply in place; without it the node still discovers/relays/serves
; OTA and just fetch-refuses apply (graceful) - a T096 is a valuable OTA relay/seeder either way.
extends = rak4631_hw
board = heltec_t096
board_build.ldscript = boards/nrf52840_s140_v6.ld
build_flags = ${rak4631_hw.build_flags}
${sensor_base.build_flags}
-D MOTA_HW_ID='"Heltec_t096"' ; OTA hardware tag (apply refuses a .mota built for other hardware)
-I lib/nrf52/s140_nrf52_6.1.1_API/include
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
-I variants/heltec_t096
-I src/helpers/ui
-D HELTEC_T096
; P1.10 must wake the event-driven nRF52 loop on both press and release so
; the polling button state machine cannot sleep through a short click.
-D MOMENTARY_BUTTON_WAKE_FROM_SLEEP=1
-D NRF52_POWER_MANAGEMENT
-D P_LORA_DIO_1=21
-D P_LORA_NSS=5
-D P_LORA_RESET=16
-D P_LORA_BUSY=19
-D P_LORA_SCLK=40
-D P_LORA_MISO=14
-D P_LORA_MOSI=11
-D P_LORA_TX_LED=28
-D P_LORA_PA_POWER=30 ;VFEM_Ctrl -LDO power enable
-D P_LORA_KCT8103L_PA_CSD=12
-D P_LORA_KCT8103L_PA_CTX=41
-D LORA_TX_POWER=22 ; Default to maximum SX1262 drive (~28dBm board output)
-D MAX_LORA_TX_POWER=22 ; Max SX1262 output -> ~28dBm at antenna
-D RADIO_CLASS=CustomSX1262
-D WRAPPER_CLASS=CustomSX1262Wrapper
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D PIN_VEXT_EN=26 ; Vext is connected to VDD which is also connected to TFT & GPS
-D PIN_VEXT_EN_ACTIVE=HIGH
-D PIN_GPS_RX=25
-D PIN_GPS_TX=23
-D PIN_GPS_EN=GPS_EN
-D PIN_GPS_EN_ACTIVE=LOW
-D PIN_GPS_RESET=GPS_RESET
-D PIN_GPS_RESET_ACTIVE=LOW
-D GPS_BAUD_RATE=115200
-D PIN_VBAT_READ=BATTERY_PIN
-D PIN_BAT_CTL=47
-D DISPLAY_CLASS=ST7735Display
-D DISPLAY_ROTATION=1
; The 160x80 T096 has no touch/navigation control for the message channel
; selector, so let message text use its 24 logical (30 physical) rows.
-D UI_MESSAGE_CHANNEL_FOOTER=0
build_src_filter = ${rak4631_hw.build_src_filter}
+<helpers/*.cpp>
+<helpers/sensors>
+<../variants/heltec_t096>
+<helpers/ui/ST7735Display.cpp>
+<helpers/ui/MomentaryButton.cpp>
lib_deps =
${rak4631_hw.lib_deps}
${sensor_base.lib_deps}
bodmer/TFT_eSPI @ ^2.4.31
debug_tool = jlink
upload_protocol = nrfutil
[env:Heltec_t096_repeater]
extends = Heltec_t096
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
build_flags =
${Heltec_t096.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D ADVERT_NAME='"Heltec_t096 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
-D RS232_BRIDGE_MERGED=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
; Explicit lean alternative to the full-sensor, non-OTA repeater above.
[env:Heltec_t096_repeater_lora_ota_no_external_sensors]
extends = Heltec_t096
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
build_flags =
${Heltec_t096.build_flags}
${nrf52_no_external_sensors_keep_gps.build_flags}
-D ENV_INCLUDE_GPS=1 ; onboard GPS remains available in the lean LoRa-OTA build
-D ADVERT_NAME='"Heltec_t096 Repeater"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
-D RS232_BRIDGE_MERGED=1
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_no_external_sensors_keep_gps.lib_deps}
bodmer/TFT_eSPI @ ^2.4.31
[env:Heltec_t096_repeater_bridge_rs232]
extends = Heltec_t096
build_flags =
${Heltec_t096.build_flags}
-UENABLE_OTA
-D DISABLE_LORA_OTA=1 ; Full external-sensor build exceeds the in-place OTA ceiling
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
; -D BRIDGE_DEBUG=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
; Explicit lean alternative to the full-sensor, non-OTA RS232 bridge above.
[env:Heltec_t096_repeater_bridge_rs232_lora_ota_no_external_sensors]
extends = Heltec_t096
build_flags =
${Heltec_t096.build_flags}
${nrf52_no_external_sensors_keep_gps.build_flags}
-D ENV_INCLUDE_GPS=1 ; onboard GPS remains available in the lean LoRa-OTA build
-D ADVERT_NAME='"RS232 Bridge"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D MAX_NEIGHBOURS=50
-D WITH_RS232_BRIDGE=Serial2
-D WITH_RS232_BRIDGE_UART=2
-D WITH_RS232_BRIDGE_RX=9
-D WITH_RS232_BRIDGE_TX=10
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/bridges/RS232Bridge.cpp>
+<../examples/simple_repeater>
lib_deps =
${nrf52_lora_ota.lib_deps}
${nrf52_no_external_sensors_keep_gps.lib_deps}
bodmer/TFT_eSPI @ ^2.4.31
[env:Heltec_t096_room_server]
extends = Heltec_t096
build_src_filter = ${Heltec_t096.build_src_filter}
+<../examples/simple_room_server>
build_flags =
${Heltec_t096.build_flags}
-D ADVERT_NAME='"Heltec_t096 Room"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D ROOM_PASSWORD='"hello"'
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
[env:Heltec_t096_sensor]
extends = Heltec_t096
build_flags =
${Heltec_t096.build_flags}
-D ADVERT_NAME='"Heltec_t096 Sensor"'
-D ADVERT_LAT=0.0
-D ADVERT_LON=0.0
-D ADMIN_PASSWORD='"password"'
-D USER_GPIO_CONTROL=1
-D ENV_PIN_SDA=PIN_WIRE1_SDA
-D ENV_PIN_SCL=PIN_WIRE1_SCL
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t096.build_src_filter}
+<../examples/simple_sensor>
lib_deps =
${Heltec_t096.lib_deps}
[env:Heltec_t096_companion_radio_ble_femon]
extends = Heltec_t096
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${Heltec_t096.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D BLE_PIN_CODE=123456
-D ENV_INCLUDE_GPS=1 ; enable the GPS page in UI
; External Grove/Qwiic sensors are on the board's second I2C controller.
-D ENV_PIN_SDA=PIN_WIRE1_SDA
-D ENV_PIN_SCL=PIN_WIRE1_SCL
; -D BLE_DEBUG_LOGGING=1
-D OFFLINE_QUEUE_SIZE=256
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
; -D POWERSAVING_DEBUG=1
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/nrf52/SerialBLEInterface.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_t096.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Heltec_t096_companion_radio_ble_femoff]
extends = env:Heltec_t096_companion_radio_ble_femon
build_flags =
${env:Heltec_t096_companion_radio_ble_femon.build_flags}
-D RADIO_FEM_RXGAIN=0 ; undefined (default on), 1=on, 0=off
[env:Heltec_t096_companion_radio_usb_femon]
extends = Heltec_t096
board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
board_upload.maximum_size = 712704
build_flags =
${Heltec_t096.build_flags}
-I examples/companion_radio/ui-new
-D MAX_CONTACTS=350
-D MAX_GROUP_CHANNELS=40
-D ENABLE_USB_INTERFACE
; The synthesized Full Companion inherits this verified external sensor bus.
-D ENV_PIN_SDA=PIN_WIRE1_SDA
-D ENV_PIN_SCL=PIN_WIRE1_SCL
; -D BLE_PIN_CODE=123456
; -D BLE_DEBUG_LOGGING=1
; -D MESH_PACKET_LOGGING=1
; -D MESH_DEBUG=1
build_src_filter = ${Heltec_t096.build_src_filter}
+<helpers/nrf52/*.cpp>
+<../examples/companion_radio/*.cpp>
+<../examples/companion_radio/ui-new/*.cpp>
lib_deps =
${Heltec_t096.lib_deps}
densaugeo/base64 @ ~1.4.0
[env:Heltec_t096_companion_radio_usb_femoff]
extends = env:Heltec_t096_companion_radio_usb_femon
build_flags =
${env:Heltec_t096_companion_radio_usb_femon.build_flags}
-D RADIO_FEM_RXGAIN=0 ; undefined (default on), 1=on, 0=off
[env:Heltec_t096_kiss_modem]
extends = Heltec_t096
build_src_filter = ${Heltec_t096.build_src_filter}
+<../examples/kiss_modem/>
Reference in new issue View Git Blame Copy Permalink