Files
mikecarper ab6412e73c Add persistent battery ADC calibration across boards
Add meter-reference calibration with saved ADC corrections, checked persistence and rollback. Preserve existing board coefficients and nRF52 voltage policy, and merge the Mini Repeater feature gates.

Validation: 69 focused tests, hosted documentation checks, and four firmware builds passed. Mini Repeater retains calibration and its existing filesystem with 376 flash bytes free; earlier Mini Sensor size failures remain documented.
2026-10-22 18:56:32 -07:00

38 lines
1010 B
C++

#pragma once
#include <Arduino.h>
#include <MeshCore.h>
#include <helpers/NRF52Board.h>
// built-ins
#define PIN_VBAT_READ 29
#define PIN_BAT_CTL 34
#define MV_LSB (3000.0F / 4096.0F) // 12-bit ADC with 3.0V input range
class HeltecMeshPocket : public NRF52BoardDCDC {
public:
HeltecMeshPocket() : NRF52Board("MESH_POCKET_OTA") {}
void begin();
bool supportsBatteryCalibration() const override { return true; }
uint16_t getBattMilliVolts() override {
int adcvalue = 0;
analogReadResolution(12);
analogReference(AR_INTERNAL_3_0);
pinMode(PIN_BAT_CTL, OUTPUT); // battery adc can be read only ctrl pin set to high
pinMode(PIN_VBAT_READ, INPUT);
digitalWrite(PIN_BAT_CTL, HIGH);
delay(10);
adcvalue = analogRead(PIN_VBAT_READ);
digitalWrite(PIN_BAT_CTL, LOW);
return calibrateBatteryMillivolts((uint16_t)((float)adcvalue * MV_LSB * 4.9));
}
const char* getManufacturerName() const override {
return "Heltec MeshPocket";
}
};