rich/MeshCore
1
0 Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
keymindCascade
MeshCore/tools/hil/profile_switch.ini
T

252 lines
7.1 KiB
INI
Raw Permalink Blame History

; RAM-only production-wrapper timing experiment. Enable from platformio.local.ini:
; [platformio]
; extra_configs = variants/*/platformio.ini
; tools/hil/profile_switch.ini
[env:profile_switch_xiao]
extends = arduino_base
platform = platformio/espressif32@6.11.0
board = seeed_xiao_esp32s3
; Native USB ignores UART baud; avoid the legacy uploader's baud-change step.
upload_speed = 115200
lib_deps =
SPI
Wire
https://github.com/jgromes/RadioLib.git#187ef24791c3d844939b2be13a68bd890bd04e4c
rweather/Crypto @ ^0.4.0
extra_scripts =
pre:scripts/esp32_wifi_scan_fix.py
post:scripts/check_firmware_ram.py
build_flags =
${arduino_base.build_flags}
-D ESP32_PLATFORM
-D MC_SX1262_HIL
-D ARDUINO_USB_MODE=1
-D ARDUINO_USB_CDC_ON_BOOT=1
-D USE_SX1262
-D P_LORA_DIO_1=39
-D P_LORA_NSS=41
-D P_LORA_RESET=42
-D P_LORA_BUSY=40
-D P_LORA_SCLK=7
-D P_LORA_MISO=8
-D P_LORA_MOSI=9
-D SX126X_RXEN=38
-D SX126X_TXEN=RADIOLIB_NC
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=0
-D LORA_TX_POWER=0
build_src_filter =
+<helpers/radiolib/RadioLibWrappers.cpp>
+<helpers/UsbLogging.cpp>
+<../tools/hil/profile_switch.cpp>
[env:profile_switch_indicator]
extends = arduino_base
platform = platformio/espressif32@6.11.0
board = esp32-s3-devkitc-1
board_upload.flash_size = 8MB
lib_deps =
${env:profile_switch_xiao.lib_deps}
lovyan03/LovyanGFX @ ^1.2.7
extra_scripts =
pre:scripts/esp32_wifi_scan_fix.py
post:scripts/check_firmware_ram.py
build_flags =
${arduino_base.build_flags}
-D ESP32_PLATFORM
-D HIL_INDICATOR
-D MC_SX1262_HIL
-D SENSECAP_INDICATOR_LORA
-I variants/sensecap_indicator-espnow
-D PIN_BOARD_SDA=39
-D PIN_BOARD_SCL=40
-D USE_SX1262
-D P_LORA_SCLK=41
-D P_LORA_MISO=47
-D P_LORA_MOSI=48
-D P_LORA_NSS=64
-D P_LORA_RESET=65
-D P_LORA_BUSY=66
-D P_LORA_DIO_1=67
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=2.4
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D LORA_TX_POWER=0
build_src_filter =
${env:profile_switch_xiao.build_src_filter}
+<../variants/sensecap_indicator-espnow/IndicatorRadioHal.cpp>
[env:profile_switch_heltec_v4]
extends = arduino_base
platform = platformio/espressif32@6.11.0
; Minimal HIL uses explicit production V4 pins, no display/PSRAM/application.
board = esp32-s3-devkitc-1
board_upload.flash_size = 16MB
board_build.partitions = default_16MB.csv
upload_speed = 115200
lib_deps = ${env:profile_switch_xiao.lib_deps}
extra_scripts =
pre:scripts/esp32_wifi_scan_fix.py
post:scripts/check_firmware_ram.py
build_flags =
${arduino_base.build_flags}
-D ESP32_PLATFORM
-D MC_SX1262_HIL
-D HIL_HELTEC_V4
-I variants/heltec_v4
-D ARDUINO_USB_MODE=1
-D ARDUINO_USB_CDC_ON_BOOT=1
-D USE_SX1262
-D P_LORA_DIO_1=14
-D P_LORA_NSS=8
-D P_LORA_RESET=12
-D P_LORA_BUSY=13
-D P_LORA_SCLK=9
-D P_LORA_MISO=11
-D P_LORA_MOSI=10
-D P_LORA_PA_POWER=7
-D P_LORA_GC1109_PA_EN=2
-D P_LORA_GC1109_PA_TX_EN=46
-D P_LORA_KCT8103L_PA_CSD=2
-D P_LORA_KCT8103L_PA_CTX=5
-D SX126X_DIO2_AS_RF_SWITCH=true
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_REGISTER_PATCH=1
-D SX126X_RX_BOOSTED_GAIN=1
-D LORA_TX_POWER=0
build_src_filter =
${env:profile_switch_xiao.build_src_filter}
+<../variants/heltec_v4/LoRaFEMControl.cpp>
[env:profile_switch_xiao_nrf52_tx]
extends = arduino_base
platform = nordicnrf52
platform_packages = ${nrf52_base.platform_packages}
board = seeed-xiao-afruitnrf52-nrf52840
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_build.variants_dir = tools/hil
board_build.variant = xiao_nrf52_variant
board_upload.maximum_size = 708608
upload_protocol = nrfutil
extra_scripts =
create-uf2.py
pre:scripts/nrf52_usb_power_fix.py
pre:scripts/nrf52_internal_flash_fix.py
post:scripts/check_firmware_ram.py
lib_deps = ${env:profile_switch_xiao.lib_deps}
lib_ignore = PsychicMqttClient
build_flags =
${arduino_base.build_flags}
-D NRF52_PLATFORM
-I lib/nrf52/s140_nrf52_7.3.0_API/include
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
-D PIN_WIRE_SCL=PIN_NFC1
-D PIN_WIRE_SDA=PIN_NFC2
-D USE_SX1262
-D P_LORA_DIO_1=D1
-D P_LORA_RESET=D2
-D P_LORA_BUSY=D3
-D P_LORA_NSS=D4
-D SX126X_RXEN=D5
-D SX126X_TXEN=RADIOLIB_NC
-D SX126X_DIO2_AS_RF_SWITCH=1
-D SX126X_DIO3_TCXO_VOLTAGE=1.8
-D SX126X_CURRENT_LIMIT=140
-D SX126X_RX_BOOSTED_GAIN=1
-D LORA_TX_POWER=0
build_src_filter =
+<helpers/UsbLogging.cpp>
+<../tools/hil/profile_switch_nrf52_tx.cpp>
; Application-only, receive-only production-wrapper timing test for the
; Seeed T1000-E LR1110. RX-only profiles are 909.5 and 909.75 MHz.
[env:profile_switch_t1000_lr1110]
extends = arduino_base
platform = nordicnrf52
platform_packages = ${nrf52_base.platform_packages}
board = tracker-t1000-e
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_build.variants_dir = tools/hil
board_build.variant = fixed_t1000_variant
board_upload.maximum_size = 708608
upload_protocol = nrfutil
extra_scripts =
create-uf2.py
pre:scripts/nrf52_usb_power_fix.py
pre:scripts/nrf52_internal_flash_fix.py
post:scripts/check_firmware_ram.py
lib_deps = ${env:profile_switch_xiao.lib_deps}
lib_ignore = PsychicMqttClient
build_flags =
${arduino_base.build_flags}
-D NRF52_PLATFORM
-I lib/nrf52/s140_nrf52_7.3.0_API/include
-I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
-D USE_LR1110
-D MC_LR1110_FAST_PROFILE_SWITCH=1
-D MC_LR1110_HIL=1
-D MC_TCXO_DELAY_US=200
-D P_LORA_DIO_1=33
-D P_LORA_NSS=12
-D P_LORA_RESET=42
-D P_LORA_BUSY=7
-D P_LORA_SCLK=11
-D P_LORA_MISO=40
-D P_LORA_MOSI=41
-D LORA_FREQ=909.5
-D LORA_BW=125
-D LORA_SF=7
-D LORA_CR=5
-D LORA_TX_POWER=0
build_src_filter =
+<helpers/radiolib/RadioLibWrappers.cpp>
+<helpers/UsbLogging.cpp>
+<../tools/hil/profile_switch_t1000_lr1110.cpp>
; Application-only SX1262 A/B timing and requested-packet receiver on the
; single Pi-attached Heltec T096. No identity, flash settings, or autonomous TX.
[env:profile_switch_t096_sx1262]
extends = arduino_base
platform = nordicnrf52
platform_packages = ${nrf52_base.platform_packages}
board = heltec_t096
board_build.ldscript = boards/nrf52840_s140_v6.ld
board_build.variants_dir = tools/hil
board_build.variant = fixed_t096_variant
upload_protocol = nrfutil
extra_scripts =
create-uf2.py
pre:scripts/nrf52_usb_power_fix.py
pre:scripts/nrf52_internal_flash_fix.py
post:scripts/check_firmware_ram.py
lib_deps = ${env:profile_switch_xiao.lib_deps}
lib_ignore = PsychicMqttClient
build_flags =
${arduino_base.build_flags}
-D NRF52_PLATFORM
-I lib/nrf52/s140_nrf52_6.1.1_API/include
-I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
-D USE_SX1262
-D MC_SX1262_HIL=1
-D MC_TCXO_DELAY_US=1600
-D P_LORA_DIO_1=21
-D P_LORA_NSS=5
-D P_LORA_RESET=16
-D P_LORA_BUSY=19
-D P_LORA_SCLK=40
-D P_LORA_MISO=14
-D P_LORA_MOSI=11
-D LORA_FREQ=909.5
-D LORA_BW=125
-D LORA_SF=7
-D LORA_CR=5
-D LORA_TX_POWER=0
build_src_filter =
+<helpers/radiolib/RadioLibWrappers.cpp>
+<helpers/UsbLogging.cpp>
+<../tools/hil/profile_switch_t096_sx1262.cpp>
Reference in new issue View Git Blame Copy Permalink