#!/usr/bin/env bash set -euo pipefail cd "$(dirname "${BASH_SOURCE[0]}")/.." source build.sh fail() { echo "test_full_infrastructure_selection: $*" >&2; exit 1; } # Resolve real board inheritance, but never compile or flash firmware. init_project_context >/dev/null assert_auto_unified() ( local plain=$1 expected=$2 BUILD_PROFILE_OVERRIDE=auto BUILD_PROFILE_EXPLICIT=0 SINGLE_TARGET_FULL_BUILD=0 RESOLVED_BUILD_TARGETS=("$plain") configure_effective_build_profile build-firmware >/dev/null [ "${RESOLVED_BUILD_TARGETS[*]}" = "$expected" ] || fail "$plain selected the wrong target" [ "$SINGLE_TARGET_FULL_BUILD" = 1 ] || fail "$plain bypassed the unified recipe" [ "$AUTO_PREFER_FULL_BUILD" = 0 ] || fail "$plain still schedules a plain Full artifact" local -a built=() run_logged_build_targets() { [ "$FIRMWARE_FILENAME_INFIX" = full-usb-wifi ] || fail "wrong artifact name" [ "$ESP32_FULL_BUILD" = 1 ] || fail "lost expanded partitions" [ "$PACKET_LOGGING_OVERRIDE" = on ] || fail "lost USB packet logging" [ "$MQTT_BRIDGE_OVERRIDE" = on ] || fail "lost MQTT" [ "$MESHDEBUG_OVERRIDE" = off ] || fail "enabled verbose debug" built+=("$@") } run_command build-firmware >/dev/null [ "${built[*]}" = "$expected" ] || fail "auto emitted duplicate Full artifacts" built=() run_full_esp32_build_targets all "$plain" "$expected" >/dev/null [ "${built[*]}" = "$expected" ] || fail "matrix emitted duplicate Full artifacts" ) assert_auto_unified heltec_v4_r8_repeater heltec_v4_r8_repeater_observer_mqtt assert_auto_unified heltec_v4_r8_room_server heltec_v4_r8_room_server_observer_mqtt assert_auto_unified heltec_v4_r8_tft_repeater heltec_v4_r8_tft_repeater_observer_mqtt assert_auto_unified Heltec_T190_repeater_ Heltec_T190_repeater_observer_mqtt assert_auto_unified LilyGo_TLora_V2_1_1_6_room_server LilyGo_TLora_V2_1_1_6_room_server_observer_mqtt_ assert_auto_unified heltec_v4_r8_repeater_observer_mqtt heltec_v4_r8_repeater_observer_mqtt # Portable images and exact reduced OTA identities must not be consolidated. for target in heltec_v4_r8_repeater heltec_v4_r8_room_server \ heltec_v4_r8_repeater_lora_ota_no_external_sensors; do ( BUILD_PROFILE_OVERRIDE=standard BUILD_PROFILE_EXPLICIT=1 SINGLE_TARGET_FULL_BUILD=0 RESOLVED_BUILD_TARGETS=("$target") configure_effective_build_profile build-firmware >/dev/null [ "${RESOLVED_BUILD_TARGETS[*]}" = "$target" ] || fail "lost portable target $target" [ "$BUILD_PROFILE_EFFECTIVE" = standard ] || fail "expanded portable image $target" [ "$SINGLE_TARGET_FULL_BUILD" = 0 ] || fail "portable image entered Full pipeline" ) done for target in Tbeam_SX1262_repeater Tbeam_SX1276_repeater \ Tbeam_SX1262_room_server Tbeam_SX1276_room_server \ LilyGo_TLora_V2_1_1_6_repeater \ heltec_v4_r8_repeater_lora_ota_no_external_sensors \ RAK_4631_repeater_bridge_rs232_serial1_lora_ota_no_external_sensors; do if get_unified_full_infrastructure_target "$target" >/dev/null; then fail "consolidated a distinct capacity/OTA contract: $target" fi done ( PIO_ENV_BOARD_BY_NAME[heltec_v4_r8_repeater_observer_mqtt]=different_board if get_unified_full_infrastructure_target heltec_v4_r8_repeater >/dev/null; then fail "accepted a different physical board" fi ) # Direct observer promotion must use the matrix's exact output recipe even if # interactive flags previously requested MQTT without USB logging. Stop at the # existing-artifact check to exercise the real build entry point without pio run. ( ESP32_FULL_BUILD=0 BUILD_PROFILE_EFFECTIVE=standard BUILD_PROFILE_OVERRIDE=auto BUILD_PROFILE_EXPLICIT=0 FIRMWARE_VERSION=vtest RESUME_BUILD_OUTPUT=1 FIRMWARE_FILENAME_INFIX="" MESHDEBUG_OVERRIDE=on PACKET_LOGGING_OVERRIDE=off MQTT_BRIDGE_OVERRIDE=off MQTT_DEBUG_OVERRIDE=on observed_filename="" observed_output="" build_artifacts_exist() { observed_filename=$2 observed_output="$PACKET_LOGGING_OVERRIDE/$MQTT_BRIDGE_OVERRIDE/$MESHDEBUG_OVERRIDE/$MQTT_DEBUG_OVERRIDE" return 0 } build_firmware heltec_v4_r8_repeater_observer_mqtt >/dev/null [[ "$observed_filename" == heltec_v4_r8_repeater_observer_mqtt-full-usb-wifi-ota-vtest-* ]] \ || fail "direct observer kept a duplicate name" [ "$observed_output" = on/on/off/off ] || fail "direct observer differs from unified recipe" [ "$PACKET_LOGGING_OVERRIDE/$MQTT_BRIDGE_OVERRIDE/$MESHDEBUG_OVERRIDE/$MQTT_DEBUG_OVERRIDE" = off/off/on/on ] \ || fail "observer output settings leaked into subsequent builds" ) ( standard_built="" full_built="" REQUIRE_OTA_UPDATES=0 run_logged_build_targets() { if [ "$ESP32_FULL_BUILD" = 0 ]; then standard_built="$*"; else full_built="$*"; fi } run_logging_matrix_build_targets heltec_v4_r8_repeater \ heltec_v4_r8_repeater_lora_ota_no_external_sensors \ heltec_v4_r8_repeater_observer_mqtt >/dev/null [ "$standard_built" = 'heltec_v4_r8_repeater heltec_v4_r8_repeater_lora_ota_no_external_sensors' ] \ || fail "matrix removed a portable build" [ "$full_built" = heltec_v4_r8_repeater_observer_mqtt ] || fail "matrix duplicated Full" [ "$ESP32_LORA_OTA_APP_LIMIT" = 1310720 ] || fail "changed the 1.25 MiB portable limit" ) # The default build settings retain power saving; this does not overwrite # preferences already stored on a device. [ "$FIRMWARE_PROFILE_OVERRIDE" = cascade ] || fail "default profile changed" PLATFORMIO_BUILD_FLAGS="" apply_firmware_profile_overrides [[ "$PLATFORMIO_BUILD_FLAGS" == *-DDEFAULT_POWERSAVING_ENABLED=1* ]] || fail "device power saving disabled" [[ "$PLATFORMIO_BUILD_FLAGS" == *-DDEFAULT_RXPS_ENABLED=1* ]] || fail "RX power saving disabled" echo "test_full_infrastructure_selection: OK"