[Heltec_tracker_v2] extends = esp32_base board = heltec_tracker_v2 build_flags = ${esp32_base.build_flags} ${sensor_base.build_flags} -I variants/heltec_tracker_v2 -D HELTEC_TRACKER_V2 ; meshcore-dev uses 160MHz; 240MHz here for WiFi/MQTT bridge headroom -D ESP32_CPU_FREQ=240 -D USE_SX1262 -D RADIO_CLASS=CustomSX1262 -D WRAPPER_CLASS=CustomSX1262Wrapper -D P_LORA_TX_LED=18 -D P_LORA_DIO_1=14 -D P_LORA_NSS=8 -D P_LORA_RESET=12 -D P_LORA_BUSY=13 -D P_LORA_SCLK=9 -D P_LORA_MISO=11 -D P_LORA_MOSI=10 -D P_LORA_PA_POWER=7 ;VFEM_Ctrl -LDO power enable -D P_LORA_KCT8103L_PA_CSD=4 -D P_LORA_KCT8103L_PA_CTX=5 -D LORA_TX_POWER=9 ; 9dBm + ~13dB KCT8103L gain = ~22dBm output -D MAX_LORA_TX_POWER=22 ; Max SX1262 output -> ~28dBm at antenna -D SX126X_DIO2_AS_RF_SWITCH=true -D SX126X_DIO3_TCXO_VOLTAGE=1.8 -D SX126X_CURRENT_LIMIT=140 -D SX126X_RX_BOOSTED_GAIN=1 -D SX126X_REGISTER_PATCH=1 -D PIN_BOARD_SDA=6 -D PIN_BOARD_SCL=17 -D PIN_USER_BTN=0 -D PIN_TFT_SDA=42 ; SDIN -D PIN_TFT_SCL=41 ; SCLK -D PIN_TFT_DC=40 ; RS (register select) -D PIN_TFT_RST=39 ; RES -D PIN_TFT_CS=38 -D USE_PIN_TFT=1 -D PIN_VEXT_EN=3 ; Vext is connected to VDD which is also connected to OLED & GPS -D PIN_VEXT_EN_ACTIVE=HIGH -D PIN_TFT_LEDA_CTL=21 ; LEDK (switches on/off via mosfet to create the ground) -D DISPLAY_ROTATION=1 -D PIN_GPS_RX=34 -D PIN_GPS_TX=33 -D PIN_GPS_RESET=35 -D PIN_GPS_RESET_ACTIVE=LOW -D GPS_BAUD_RATE=115200 -D ENV_INCLUDE_GPS=1 -D PIN_ADC_CTRL=2 -D PIN_VBAT_READ=1 build_src_filter = ${esp32_base.build_src_filter} +<../variants/heltec_tracker_v2> + lib_deps = ${esp32_base.lib_deps} ${sensor_base.lib_deps} bodmer/TFT_eSPI @ ^2.4.31 [Heltec_tracker_v1_1] extends = Heltec_tracker_v2 board = heltec_tracker_v1_1 build_flags = ${esp32_base.build_flags} ${sensor_base.build_flags} -I variants/heltec_tracker_v2 -D HELTEC_TRACKER_V1_1 -D ESP32_CPU_FREQ=240 -D USE_SX1262 -D RADIO_CLASS=CustomSX1262 -D WRAPPER_CLASS=CustomSX1262Wrapper -D P_LORA_TX_LED=18 -D P_LORA_DIO_1=14 -D P_LORA_NSS=8 -D P_LORA_RESET=12 -D P_LORA_BUSY=13 -D P_LORA_SCLK=9 -D P_LORA_MISO=11 -D P_LORA_MOSI=10 -D LORA_TX_POWER=22 -D SX126X_DIO2_AS_RF_SWITCH=true -D SX126X_DIO3_TCXO_VOLTAGE=1.8 -D SX126X_CURRENT_LIMIT=140 -D SX126X_RX_BOOSTED_GAIN=1 -D SX126X_REGISTER_PATCH=1 -D PIN_BOARD_SDA=6 -D PIN_BOARD_SCL=17 -D PIN_USER_BTN=0 -D PIN_TFT_SDA=42 ; SDIN -D PIN_TFT_SCL=41 ; SCLK -D PIN_TFT_DC=40 ; RS (register select) -D PIN_TFT_RST=39 ; RES -D PIN_TFT_CS=38 -D USE_PIN_TFT=1 -D PIN_VEXT_EN=3 ; Vext is connected to VDD which is also connected to OLED & GPS -D PIN_VEXT_EN_ACTIVE=HIGH -D PIN_TFT_LEDA_CTL=21 ; LEDK (switches on/off via mosfet to create the ground) -D DISPLAY_ROTATION=1 -D PIN_GPS_RX=34 -D PIN_GPS_TX=33 -D PIN_GPS_RESET=35 -D PIN_GPS_RESET_ACTIVE=LOW -D GPS_BAUD_RATE=115200 -D ENV_INCLUDE_GPS=1 -D PIN_ADC_CTRL=2 -D PIN_VBAT_READ=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} lib_deps = ${Heltec_tracker_v2.lib_deps} [env:heltec_tracker_v2_repeater] extends = Heltec_tracker_v2 build_flags = ${Heltec_tracker_v2.build_flags} -D DISPLAY_CLASS=ST7735Display -D ADVERT_NAME='"Heltec Repeater"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} + +<../examples/simple_repeater> lib_deps = ${Heltec_tracker_v2.lib_deps} ${esp32_ota.lib_deps} bakercp/CRC32 @ ^2.0.0 [env:heltec_tracker_v2_repeater_bridge_espnow] extends = Heltec_tracker_v2 build_flags = ${Heltec_tracker_v2.build_flags} -D DISPLAY_CLASS=ST7735Display -D ADVERT_NAME='"ESPNow Bridge"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_ESPNOW_BRIDGE=1 ; -D BRIDGE_DEBUG=1 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} + + +<../examples/simple_repeater> lib_deps = ${Heltec_tracker_v2.lib_deps} ${esp32_ota.lib_deps} [env:heltec_tracker_v2_room_server] extends = Heltec_tracker_v2 build_flags = ${Heltec_tracker_v2.build_flags} -D DISPLAY_CLASS=ST7735Display -D ADVERT_NAME='"Heltec Room"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D ROOM_PASSWORD='"hello"' ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} + +<../examples/simple_room_server> lib_deps = ${Heltec_tracker_v2.lib_deps} ${esp32_ota.lib_deps} [env:heltec_tracker_v1_1_repeater_observer_mqtt] extends = Heltec_tracker_v1_1 extra_scripts = ${esp32_base.extra_scripts} pre:scripts/generate_cert_bundle.py board_ssl_cert_source = adafruit-full board_build.embed_files = src/certs/x509_crt_bundle.bin build_flags = ${Heltec_tracker_v1_1.build_flags} -D DISPLAY_CLASS=ST7735Display -D ADVERT_NAME='"MQTT Observer"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_MQTT_BRIDGE=1 ; Non-PSRAM board: neighbors table costs ~4 KB of internal DRAM (see MQTTBridge.h). -D MQTT_NEIGHBORS_WITHOUT_PSRAM=1 -D MQTT_MAX_PACKET_SIZE=1024 -D MQTT_DEBUG=1 -D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y -D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm build_src_filter = ${Heltec_tracker_v1_1.build_src_filter} + + + + +<../examples/simple_repeater> lib_deps = ${Heltec_tracker_v1_1.lib_deps} ${esp32_ota.lib_deps} elims/PsychicMqttClient@^0.2.4 bblanchon/ArduinoJson @ 7.4.3 arduino-libraries/NTPClient JChristensen/Timezone paulstoffregen/Time@1.6.1 [env:heltec_tracker_v2_repeater_observer_mqtt] extends = Heltec_tracker_v2 extra_scripts = ${esp32_base.extra_scripts} pre:scripts/generate_cert_bundle.py board_ssl_cert_source = adafruit-full board_build.embed_files = src/certs/x509_crt_bundle.bin build_flags = ${Heltec_tracker_v2.build_flags} -D DISPLAY_CLASS=ST7735Display -D ADVERT_NAME='"MQTT Observer"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D MAX_NEIGHBOURS=50 -D WITH_MQTT_BRIDGE=1 ; Non-PSRAM board: neighbors table costs ~4 KB of internal DRAM (see MQTTBridge.h). -D MQTT_NEIGHBORS_WITHOUT_PSRAM=1 -D MQTT_MAX_PACKET_SIZE=1024 -D MQTT_DEBUG=1 -D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y -D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm build_src_filter = ${Heltec_tracker_v2.build_src_filter} + + + + +<../examples/simple_repeater> lib_deps = ${Heltec_tracker_v2.lib_deps} ${esp32_ota.lib_deps} elims/PsychicMqttClient@^0.2.4 bblanchon/ArduinoJson @ 7.4.3 arduino-libraries/NTPClient JChristensen/Timezone paulstoffregen/Time@1.6.1 [env:heltec_tracker_v1_1_room_server_observer_mqtt] extends = Heltec_tracker_v1_1 extra_scripts = ${esp32_base.extra_scripts} pre:scripts/generate_cert_bundle.py board_ssl_cert_source = adafruit-full board_build.embed_files = src/certs/x509_crt_bundle.bin build_flags = ${Heltec_tracker_v1_1.build_flags} -D DISPLAY_CLASS=ST7735Display -D ADVERT_NAME='"Heltec Tracker Room Observer"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D ROOM_PASSWORD='"hello"' -D WITH_MQTT_BRIDGE=1 ; Non-PSRAM board: neighbors table costs ~4 KB of internal DRAM (see MQTTBridge.h). -D MQTT_NEIGHBORS_WITHOUT_PSRAM=1 -D MAX_NEIGHBOURS=50 -D MQTT_MAX_PACKET_SIZE=1024 -D MQTT_DEBUG=1 -D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y -D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm build_src_filter = ${Heltec_tracker_v1_1.build_src_filter} + + + + +<../examples/simple_room_server> lib_deps = ${Heltec_tracker_v1_1.lib_deps} ${esp32_ota.lib_deps} elims/PsychicMqttClient@^0.2.4 bblanchon/ArduinoJson @ 7.4.3 arduino-libraries/NTPClient JChristensen/Timezone paulstoffregen/Time@1.6.1 [env:heltec_tracker_v2_room_server_observer_mqtt] extends = Heltec_tracker_v2 extra_scripts = ${esp32_base.extra_scripts} pre:scripts/generate_cert_bundle.py board_ssl_cert_source = adafruit-full board_build.embed_files = src/certs/x509_crt_bundle.bin build_flags = ${Heltec_tracker_v2.build_flags} -D DISPLAY_CLASS=ST7735Display -D ADVERT_NAME='"Heltec Tracker Room Observer"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D ROOM_PASSWORD='"hello"' -D WITH_MQTT_BRIDGE=1 ; Non-PSRAM board: neighbors table costs ~4 KB of internal DRAM (see MQTTBridge.h). -D MQTT_NEIGHBORS_WITHOUT_PSRAM=1 -D MAX_NEIGHBOURS=50 -D MQTT_MAX_PACKET_SIZE=1024 -D MQTT_DEBUG=1 -D CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y -D MQTT_WIFI_TX_POWER=WIFI_POWER_11dBm build_src_filter = ${Heltec_tracker_v2.build_src_filter} + + + + +<../examples/simple_room_server> lib_deps = ${Heltec_tracker_v2.lib_deps} ${esp32_ota.lib_deps} elims/PsychicMqttClient@^0.2.4 bblanchon/ArduinoJson @ 7.4.3 arduino-libraries/NTPClient JChristensen/Timezone paulstoffregen/Time@1.6.1 [env:heltec_tracker_v2_terminal_chat] extends = Heltec_tracker_v2 build_flags = ${Heltec_tracker_v2.build_flags} -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=1 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} +<../examples/simple_secure_chat/main.cpp> lib_deps = ${Heltec_tracker_v2.lib_deps} densaugeo/base64 @ ~1.4.0 [env:heltec_tracker_v2_companion_radio_usb_femon] extends = Heltec_tracker_v2 build_flags = ${Heltec_tracker_v2.build_flags} -I examples/companion_radio/ui-new -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 -D DISPLAY_CLASS=ST7735Display -D ENABLE_USB_INTERFACE ; NOTE: DO NOT ENABLE --> -D MESH_PACKET_LOGGING=1 ; NOTE: DO NOT ENABLE --> -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} + + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${Heltec_tracker_v2.lib_deps} densaugeo/base64 @ ~1.4.0 [env:heltec_tracker_v2_companion_radio_usb_femoff] extends = env:heltec_tracker_v2_companion_radio_usb_femon build_flags = ${env:heltec_tracker_v2_companion_radio_usb_femon.build_flags} -D RADIO_FEM_RXGAIN=0 ; undefined (default on), 1=on, 0=off [env:heltec_tracker_v2_companion_radio_ble_femon] extends = Heltec_tracker_v2 build_flags = ${Heltec_tracker_v2.build_flags} -I examples/companion_radio/ui-new -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 -D DISPLAY_CLASS=ST7735Display -D BLE_PIN_CODE=123456 ; dynamic, random PIN -D AUTO_SHUTDOWN_MILLIVOLTS=3400 -D BLE_DEBUG_LOGGING=1 -D OFFLINE_QUEUE_SIZE=256 ; -D BLE_DEBUG_LOGGING=1 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} + + + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${Heltec_tracker_v2.lib_deps} densaugeo/base64 @ ~1.4.0 [env:heltec_tracker_v2_companion_radio_ble_femoff] extends = env:heltec_tracker_v2_companion_radio_ble_femon build_flags = ${env:heltec_tracker_v2_companion_radio_ble_femon.build_flags} -D RADIO_FEM_RXGAIN=0 ; undefined (default on), 1=on, 0=off [env:heltec_tracker_v2_companion_radio_wifi_femon] extends = Heltec_tracker_v2 build_flags = ${Heltec_tracker_v2.build_flags} -I examples/companion_radio/ui-new -D ENABLE_WIFI_INTERFACE -D MAX_CONTACTS=350 -D MAX_GROUP_CHANNELS=40 -D DISPLAY_CLASS=ST7735Display -D WIFI_DEBUG_LOGGING=1 -D WIFI_SSID='"myssid"' -D WIFI_PWD='"mypwd"' -D OFFLINE_QUEUE_SIZE=256 ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} + + + + +<../examples/companion_radio/*.cpp> +<../examples/companion_radio/ui-new/*.cpp> lib_deps = ${Heltec_tracker_v2.lib_deps} densaugeo/base64 @ ~1.4.0 [env:heltec_tracker_v2_companion_radio_full_femon] extends = env:heltec_tracker_v2_companion_radio_wifi_femon board_build.flash_mode = ${esp32_s3_full.board_build.flash_mode} build_flags = ${env:heltec_tracker_v2_companion_radio_wifi_femon.build_flags} ; Bound by the ui-new source assertion: Splash + Home + full 32-message ; preview history and ESP32 allocator overhead, without reducing UI state. -D MESH_COMPANION_SCREEN_STARTUP_BYTES=9808 -D MESHCORE_REQUIRES_COMPANION_RADIO_FULL=1 [env:heltec_tracker_v2_companion_radio_wifi_femoff] extends = env:heltec_tracker_v2_companion_radio_wifi_femon build_flags = ${env:heltec_tracker_v2_companion_radio_wifi_femon.build_flags} -D RADIO_FEM_RXGAIN=0 ; undefined (default on), 1=on, 0=off [env:heltec_tracker_v2_sensor] extends = Heltec_tracker_v2 build_flags = ${Heltec_tracker_v2.build_flags} -D ADVERT_NAME='"Heltec Tracker V2 Sensor"' -D ADVERT_LAT=0.0 -D ADVERT_LON=0.0 -D ADMIN_PASSWORD='"password"' -D DISPLAY_CLASS=ST7735Display ; -D MESH_PACKET_LOGGING=1 ; -D MESH_DEBUG=1 build_src_filter = ${Heltec_tracker_v2.build_src_filter} + +<../examples/simple_sensor> lib_deps = ${Heltec_tracker_v2.lib_deps} ${esp32_ota.lib_deps} [env:heltec_tracker_v2_kiss_modem] extends = Heltec_tracker_v2 build_src_filter = ${Heltec_tracker_v2.build_src_filter} +<../examples/kiss_modem/>