; RAM-only production-wrapper timing experiment. Enable from platformio.local.ini:
; [platformio]
; extra_configs = variants/*/platformio.ini
;                 tools/hil/profile_switch.ini
[env:profile_switch_xiao]
extends = arduino_base
platform = platformio/espressif32@6.11.0
board = seeed_xiao_esp32s3
; Native USB ignores UART baud; avoid the legacy uploader's baud-change step.
upload_speed = 115200
lib_deps =
  SPI
  Wire
  https://github.com/jgromes/RadioLib.git#187ef24791c3d844939b2be13a68bd890bd04e4c
  rweather/Crypto @ ^0.4.0
extra_scripts =
  pre:scripts/esp32_wifi_scan_fix.py
  post:scripts/check_firmware_ram.py
build_flags =
  ${arduino_base.build_flags}
  -D ESP32_PLATFORM
  -D MC_SX1262_HIL
  -D ARDUINO_USB_MODE=1
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -D USE_SX1262
  -D P_LORA_DIO_1=39
  -D P_LORA_NSS=41
  -D P_LORA_RESET=42
  -D P_LORA_BUSY=40
  -D P_LORA_SCLK=7
  -D P_LORA_MISO=8
  -D P_LORA_MOSI=9
  -D SX126X_RXEN=38
  -D SX126X_TXEN=RADIOLIB_NC
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=0
  -D LORA_TX_POWER=0
build_src_filter =
  +<helpers/radiolib/RadioLibWrappers.cpp>
  +<helpers/UsbLogging.cpp>
  +<../tools/hil/profile_switch.cpp>

[env:profile_switch_indicator]
extends = arduino_base
platform = platformio/espressif32@6.11.0
board = esp32-s3-devkitc-1
board_upload.flash_size = 8MB
lib_deps =
  ${env:profile_switch_xiao.lib_deps}
  lovyan03/LovyanGFX @ ^1.2.7
extra_scripts =
  pre:scripts/esp32_wifi_scan_fix.py
  post:scripts/check_firmware_ram.py
build_flags =
  ${arduino_base.build_flags}
  -D ESP32_PLATFORM
  -D HIL_INDICATOR
  -D MC_SX1262_HIL
  -D SENSECAP_INDICATOR_LORA
  -I variants/sensecap_indicator-espnow
  -D PIN_BOARD_SDA=39
  -D PIN_BOARD_SCL=40
  -D USE_SX1262
  -D P_LORA_SCLK=41
  -D P_LORA_MISO=47
  -D P_LORA_MOSI=48
  -D P_LORA_NSS=64
  -D P_LORA_RESET=65
  -D P_LORA_BUSY=66
  -D P_LORA_DIO_1=67
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=2.4
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D LORA_TX_POWER=0
build_src_filter =
  ${env:profile_switch_xiao.build_src_filter}
  +<../variants/sensecap_indicator-espnow/IndicatorRadioHal.cpp>

[env:profile_switch_heltec_v4]
extends = arduino_base
platform = platformio/espressif32@6.11.0
; Minimal HIL uses explicit production V4 pins, no display/PSRAM/application.
board = esp32-s3-devkitc-1
board_upload.flash_size = 16MB
board_build.partitions = default_16MB.csv
upload_speed = 115200
lib_deps = ${env:profile_switch_xiao.lib_deps}
extra_scripts =
  pre:scripts/esp32_wifi_scan_fix.py
  post:scripts/check_firmware_ram.py
build_flags =
  ${arduino_base.build_flags}
  -D ESP32_PLATFORM
  -D MC_SX1262_HIL
  -D HIL_HELTEC_V4
  -I variants/heltec_v4
  -D ARDUINO_USB_MODE=1
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -D USE_SX1262
  -D P_LORA_DIO_1=14
  -D P_LORA_NSS=8
  -D P_LORA_RESET=12
  -D P_LORA_BUSY=13
  -D P_LORA_SCLK=9
  -D P_LORA_MISO=11
  -D P_LORA_MOSI=10
  -D P_LORA_PA_POWER=7
  -D P_LORA_GC1109_PA_EN=2
  -D P_LORA_GC1109_PA_TX_EN=46
  -D P_LORA_KCT8103L_PA_CSD=2
  -D P_LORA_KCT8103L_PA_CTX=5
  -D SX126X_DIO2_AS_RF_SWITCH=true
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_REGISTER_PATCH=1
  -D SX126X_RX_BOOSTED_GAIN=1
  -D LORA_TX_POWER=0
build_src_filter =
  ${env:profile_switch_xiao.build_src_filter}
  +<../variants/heltec_v4/LoRaFEMControl.cpp>

[env:profile_switch_xiao_nrf52_tx]
extends = arduino_base
platform = nordicnrf52
platform_packages = ${nrf52_base.platform_packages}
board = seeed-xiao-afruitnrf52-nrf52840
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_build.variants_dir = tools/hil
board_build.variant = xiao_nrf52_variant
board_upload.maximum_size = 708608
upload_protocol = nrfutil
extra_scripts =
  create-uf2.py
  pre:scripts/nrf52_usb_power_fix.py
  pre:scripts/nrf52_internal_flash_fix.py
  post:scripts/check_firmware_ram.py
lib_deps = ${env:profile_switch_xiao.lib_deps}
lib_ignore = PsychicMqttClient
build_flags =
  ${arduino_base.build_flags}
  -D NRF52_PLATFORM
  -I lib/nrf52/s140_nrf52_7.3.0_API/include
  -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
  -D PIN_WIRE_SCL=PIN_NFC1
  -D PIN_WIRE_SDA=PIN_NFC2
  -D USE_SX1262
  -D P_LORA_DIO_1=D1
  -D P_LORA_RESET=D2
  -D P_LORA_BUSY=D3
  -D P_LORA_NSS=D4
  -D SX126X_RXEN=D5
  -D SX126X_TXEN=RADIOLIB_NC
  -D SX126X_DIO2_AS_RF_SWITCH=1
  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
  -D SX126X_CURRENT_LIMIT=140
  -D SX126X_RX_BOOSTED_GAIN=1
  -D LORA_TX_POWER=0
build_src_filter =
  +<helpers/UsbLogging.cpp>
  +<../tools/hil/profile_switch_nrf52_tx.cpp>

; Application-only, receive-only production-wrapper timing test for the
; Seeed T1000-E LR1110. RX-only profiles are 909.5 and 909.75 MHz.
[env:profile_switch_t1000_lr1110]
extends = arduino_base
platform = nordicnrf52
platform_packages = ${nrf52_base.platform_packages}
board = tracker-t1000-e
board_build.ldscript = boards/nrf52840_s140_v7_extrafs.ld
board_build.variants_dir = tools/hil
board_build.variant = fixed_t1000_variant
board_upload.maximum_size = 708608
upload_protocol = nrfutil
extra_scripts =
  create-uf2.py
  pre:scripts/nrf52_usb_power_fix.py
  pre:scripts/nrf52_internal_flash_fix.py
  post:scripts/check_firmware_ram.py
lib_deps = ${env:profile_switch_xiao.lib_deps}
lib_ignore = PsychicMqttClient
build_flags =
  ${arduino_base.build_flags}
  -D NRF52_PLATFORM
  -I lib/nrf52/s140_nrf52_7.3.0_API/include
  -I lib/nrf52/s140_nrf52_7.3.0_API/include/nrf52
  -D USE_LR1110
  -D MC_LR1110_FAST_PROFILE_SWITCH=1
  -D MC_LR1110_HIL=1
  -D MC_TCXO_DELAY_US=200
  -D P_LORA_DIO_1=33
  -D P_LORA_NSS=12
  -D P_LORA_RESET=42
  -D P_LORA_BUSY=7
  -D P_LORA_SCLK=11
  -D P_LORA_MISO=40
  -D P_LORA_MOSI=41
  -D LORA_FREQ=909.5
  -D LORA_BW=125
  -D LORA_SF=7
  -D LORA_CR=5
  -D LORA_TX_POWER=0
build_src_filter =
  +<helpers/radiolib/RadioLibWrappers.cpp>
  +<helpers/UsbLogging.cpp>
  +<../tools/hil/profile_switch_t1000_lr1110.cpp>

; Application-only SX1262 A/B timing and requested-packet receiver on the
; single Pi-attached Heltec T096. No identity, flash settings, or autonomous TX.
[env:profile_switch_t096_sx1262]
extends = arduino_base
platform = nordicnrf52
platform_packages = ${nrf52_base.platform_packages}
board = heltec_t096
board_build.ldscript = boards/nrf52840_s140_v6.ld
board_build.variants_dir = tools/hil
board_build.variant = fixed_t096_variant
upload_protocol = nrfutil
extra_scripts =
  create-uf2.py
  pre:scripts/nrf52_usb_power_fix.py
  pre:scripts/nrf52_internal_flash_fix.py
  post:scripts/check_firmware_ram.py
lib_deps = ${env:profile_switch_xiao.lib_deps}
lib_ignore = PsychicMqttClient
build_flags =
  ${arduino_base.build_flags}
  -D NRF52_PLATFORM
  -I lib/nrf52/s140_nrf52_6.1.1_API/include
  -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
  -D USE_SX1262
  -D MC_SX1262_HIL=1
  -D MC_TCXO_DELAY_US=1600
  -D P_LORA_DIO_1=21
  -D P_LORA_NSS=5
  -D P_LORA_RESET=16
  -D P_LORA_BUSY=19
  -D P_LORA_SCLK=40
  -D P_LORA_MISO=14
  -D P_LORA_MOSI=11
  -D LORA_FREQ=909.5
  -D LORA_BW=125
  -D LORA_SF=7
  -D LORA_CR=5
  -D LORA_TX_POWER=0
build_src_filter =
  +<helpers/radiolib/RadioLibWrappers.cpp>
  +<helpers/UsbLogging.cpp>
  +<../tools/hil/profile_switch_t096_sx1262.cpp>