/*
  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
  Copyright (c) 2016 Sandeep Mistry All right reserved.
  Copyright (c) 2018, Adafruit Industries (adafruit.com)

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  See the GNU Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
*/

#include "variant.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
#include "nrf.h"

const uint32_t g_ADigitalPinMap[] =
{
  // P0
  0 , 1 , 2 , 3 , 4 , 5 , 6 , 7 ,
  8 , 9 , 10, 11, 12, 13, 14, 15,
  16, 17, 18, 19, 20, 21, 22, 23,
  24, 25, 26, 27, 28, 29, 30, 31,

  // P1
  32, 33, 34, 35, 36, 37, 38, 39,
  40, 41, 42, 43, 44, 45, 46, 47
};


void initVariant()
{
  // LED1 & LED2
  pinMode(PIN_LED1, OUTPUT);
  ledOff(PIN_LED1);

  pinMode(PIN_LED2, OUTPUT);
  ledOff(PIN_LED2);;

#if defined(OTA_RAK_AUTO_STORE)
  // Keep both chip selects high through startup. RAK15001 and native W25Q16
  // use the WisBlock SPI bus; a header W25Q16 uses TX1/RX1/IO1 instead.
  pinMode(26, OUTPUT);
  digitalWrite(26, HIGH);
  pinMode(31, OUTPUT);
  digitalWrite(31, HIGH);
#elif defined(OTA_QSPI_STORE) && defined(OTA_QSPI_CS_ARDUINO_PIN)
  // Deselect a wired OTA NOR before any other device can toggle shared
  // WisBlock SPI nets. The W25Q16 installation also needs a physical CS#
  // pull-up so the signal is defined while the MCU is in reset.
  pinMode(OTA_QSPI_CS_ARDUINO_PIN, OUTPUT);
  digitalWrite(OTA_QSPI_CS_ARDUINO_PIN, HIGH);
#endif
}