Implement a new method `formatRadioDiagReply` in MyMesh to format and return radio diagnostic information. Update CommonCLI to handle the new command for retrieving radio diagnostics. Enhance the Dispatcher class with a radio watchdog feature to monitor and recover from silent radio states. Introduce new error flags and methods in the Dispatcher and RadioLibWrapper classes to support these diagnostics, improving overall radio management and troubleshooting capabilities.
Reverted prior dev merge, then merged current meshcore-dev dev. Resolved
CommonCLI by restoring MQTT prefs flow with upstream com_prefs layout
(rx_boosted_gain at offset 79), rxgain CLI, poweroff/shutdown, and FEM
variant files from upstream.
Made-with: Cursor
1. warm sleep
2. wake to stdby
3. Calibrate(0x7F) to reset all internal blocks
4. re-apply DIO2 RF / boosted gain & register patch to make sure
everything is as it was
Resolve conflict in variants/heltec_v4/platformio.ini by taking
origin/dev version for PA pin comments and SX126X_RX_BOOSTED_GAIN.
Co-authored-by: Cursor <cursoragent@cursor.com>
- Introduced `getPacketsRecvErrors()` method in `Dispatcher` to track receive errors.
- Updated `buildStatusMessage()` in `MQTTMessageBuilder` to include `recv_errors` parameter.
- Modified `publishStatus()` in `MQTTBridge` to retrieve and send receive error statistics.
- Adjusted `RadioLibWrappers` to override `getPacketsRecvErrors()` for consistency.
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).
This should significantly reduce power consumption in hibernation.
Fixes: #1014
Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com>
Signed-off-by: Frieder Schrempf <frieder@fris.de> # generalize for all radios and UIs
it seems that if the LR1110 radio hears a packet corrupted in a specific way, it'll report a packet of 0 length and with the header error IRQ set. every packet received afterwards will then be shifted to the right by 4 bytes on top of the radio's reported offset. this can occur multiple times with the shift increasing by 4 bytes each time. thus, this patch will read from an additional offset after hearing the trigger packet.
transmitting seems to reset the shift - unsure exactly what operation resets it but standby() is called after tx so patch assumes shift is 0 after standby(). more investigation may be needed here.