mikecarper
47993d178e
Update MeshCore features and OTA layout handling
2026-08-18 23:17:42 -07:00
mikecarper
a65769c96a
Harden ESP32 identity entropy handling
2026-08-11 14:25:52 -07:00
mikecarper
ad533e642f
Fix ESP32 KISS serial guard
2026-08-04 01:16:18 -07:00
mikecarper
308589afa3
Harden nRF52 shutdown and radio recovery
2026-07-31 16:01:02 -07:00
mikecarper
566ef08f25
Merge upstream dev into keymindCascade
2026-07-24 01:23:20 -07:00
mikecarper
d5a00da2a0
Harden nRF52 persistence, watchdog, and build variants
2026-07-20 22:55:58 -07:00
ViezeVingertjes and Adam Gessaman
3b69e7873b
fix: guard HWCDC serial config behind ARDUINO_USB_MODE
...
setTxTimeoutMs() and setTxBufferSize() are HWCDC-only APIs; calling
them on HardwareSerial (UART-bridge boards like T-Beam) fails to compile.
Co-Authored-By: Adam Gessaman <adam@gessaman.com >
2026-07-18 22:43:55 +02:00
ViezeVingertjes
fb2c61f862
fix: prevent ESP32 KISS modem stalls under USB backpressure
...
Switch ESP32-S3 KISS modem environments to HWCDC and move outbound KISS writes to a non-blocking queued frame path so loop() and TX completion keep progressing when the host reads slowly. Add native backpressure regression tests and correct the native_kiss_modem test filter so this suite runs directly with pio test.
2026-07-18 22:43:55 +02:00
AtlavoxDev
e5dab6b999
Rename bootComplete() to onBootComplete() for naming consistency
...
Matches the existing event-style lifecycle hooks on MainBoard
(onBeforeTransmit, onAfterTransmit) per @liamcottle's review feedback.
2026-05-25 09:50:28 -04:00
AtlavoxDev
39a69b86c3
Add MainBoard::bootComplete() hook for boot-indicator LED feedback
...
Framework for upcoming variant-specific PRs that add LED feedback during boot. The hook gives users visual cues that the device is busy and
shouldn't be interacted with until startup completes.
2026-05-25 09:04:47 -04:00
tuzzmaniandevil
ffa76016ff
Address two comments from PR
2026-05-08 11:14:22 +12:00
tuzzmaniandevil
314d777b42
Enhance KissModem frame processing and timeout handling
2026-05-07 00:03:09 +00:00
Scott Powell
0a8a0a4904
* Refactor: removed duplicated radio_rng_seed(), radio_set_params(), radio_set_tx_power()
2026-05-01 14:47:07 +10:00
Rastislav Vysoky
5beef490a0
add kiss radio env to most of the variants
2026-04-28 15:09:25 +02:00
agessaman
776131e263
simplify kiss noise floor sampling
2026-02-07 07:42:52 -08:00
ViezeVingertjes
f6ebbd978e
Remove redundant locals in handleSetRadio
2026-02-07 14:32:11 +01:00
ViezeVingertjes
5157daf1c1
Remove individual HW_RESP_* defines, use HW_RESP() macro directly
2026-02-07 14:24:34 +01:00
ViezeVingertjes
00b44c4114
Remove redundant send/complete/finished callbacks, use Radio interface directly
2026-02-07 14:22:21 +01:00
ViezeVingertjes
5ccd99e25f
Add toggleable per-packet signal reporting
2026-02-07 10:21:36 +01:00
ViezeVingertjes
7982d1ce1f
Use high-bit convention for hardware response codes
2026-02-07 10:21:32 +01:00
ViezeVingertjes
49e7516145
Add KISS UART support
2026-02-07 08:51:52 +01:00
agessaman
f445b5acdc
fix(kiss_modem): improve RX delivery and noise floor sampling
2026-02-07 08:51:52 +01:00
ViezeVingertjes
02ddc05c30
Reorganise KISS protocol to close gaps.
2026-02-07 08:51:52 +01:00
ViezeVingertjes
f78617dbdb
Add periodic noise floor calibration and AGC reset
2026-02-07 08:51:52 +01:00
ViezeVingertjes
5dcc377b77
Rewrite KISS modem to be fully spec-compliant
2026-02-07 08:51:52 +01:00
Adam Gessaman
c0b81b9ad8
Clean up comments on kiss noise floor changes.
2026-02-05 09:46:30 -08:00
agessaman
0fb570338f
fix(kiss): periodic noise floor calibration and AGC reset
...
- Trigger noise floor calibration every 2s and AGC reset every 30s in main loop.
- Reorder loop to match Dispatcher: calibrate + radio.loop() before AGC reset
and recvRaw() so RSSI is never sampled right after startReceive().
- Update protocol doc with calibration intervals and typical noise floor range.
- Variant platformio.ini updates (heltec_v3, rak4631).
2026-02-03 20:58:39 -08:00
ViezeVingertjes
f0ba14ff75
Remove sync word handling from KissModem.
2026-02-02 18:05:26 +01:00
ViezeVingertjes
240b5ea1e3
Refactor KissModem to integrate radio and sensor management directly, removing callback dependencies.
2026-01-31 15:15:19 +01:00
ViezeVingertjes
1bcb52bab3
Add new commands and responses for RSSI, channel status, airtime, noise floor, statistics, battery, and sensors.
2026-01-31 15:05:25 +01:00
ViezeVingertjes
c786cfe613
Add KISS Modem firmware
2026-01-31 10:22:32 +01:00