Commit Graph
225 Commits
Author SHA1 Message Date
mikecarper f05524a4a2 Keep the console responsive during MQTT shutdown 2026-10-05 19:05:58 -07:00
mikecarper 6765100c3a Retain independent RS232 in Full MQTT repeaters 2026-10-05 18:21:42 -07:00
mikecarper 69d9ac84bc Include runtime ESP-NOW in Full ESP32 repeaters 2026-10-05 17:33:02 -07:00
mikecarper 6cd1289c8b Combine MKE S3 repeater bridge modes at runtime 2026-10-05 17:12:10 -07:00
mikecarper 47135e081c Make ESP32 OTA startup handle WiFi and WebConfig automatically
Report the upload address and required network, honor AP switches on an existing uploader, and keep delayed WebConfig cleanup from disabling OTA WiFi. Preserve actionable startup errors and account for OTA in wireless state controls.

Exercise the production OTA lifecycle and stock website console, including power-saving idle sessions, in host regression tests.
2026-10-05 10:31:43 -07:00
mikecarper 9a3774ad04 Merge observer OTA channel switching into keymindCascade 2026-10-04 00:26:46 -07:00
mikecarper 30b18beecd Harden management report persistence and CLI input handling 2026-10-03 18:26:26 -07:00
mikecarper 24fcbf3247 Merge USB session safety and preserve GPS preference compatibility 2026-10-03 16:12:32 -07:00
mikecarper 1ddca12a41 Add saved repeater trace exception while repeating is disabled 2026-10-03 15:48:44 -07:00
mikecarper d454250cab Fix USB logging session safety and add hourly GPS sync interval 2026-10-03 15:43:35 -07:00
mikecarper 6febd15ded Harden USB logging and persist watchdog events in management reports 2026-10-03 15:29:19 -07:00
agessaman 6e2c94e9b2 Merge branch 'feat/ota-branch-switch' into merge/ota-branch-into-observer-firmware-dev
# Conflicts:
#	.github/workflows/build-observer-firmwares.yml
#	examples/simple_repeater/MyMesh.cpp
#	examples/simple_room_server/MyMesh.cpp
#	src/helpers/ESP32Board.cpp
#	src/helpers/ESP32Board.h
#	test/test_config_serializer/test_config_serializer.cpp
2026-10-03 15:24:33 -07:00
Elektr0Vodka d88f1ff68b feat(ota): persist ota_channel selector in NodePrefs
(cherry picked from commit db1db5b57ecce408c7441cb6aa70f29608b09603)
2026-10-03 15:17:36 -07:00
agessaman 7e39cac254 Merge upstream/dev into observer-firmware-dev
Picks up 35 upstream commits through 988d017a: board loop() hook,
sensor SUBSCRIBE/telemetry push, companion MyMesh::Listener UI refactor,
agc.reset.interval widened to uint16, LR1121 DC-DC, ThinkNode M4 and
Muzi Base boards, M7 companion WiFi.
2026-09-26 09:32:09 -07:00
mikecarper c31a0e5ed5 Merge upstream dev into keymindCascade 2026-09-24 00:51:07 -07:00
mikecarper b089b745fa feat(ui): page radio and system status 2026-09-21 15:35:46 -07:00
Blake Latchford 0c3fe356d0 Constrain agc.reset.interval and allow intervals > 255s 2026-09-21 12:26:36 -04:00
agessaman 7523ac742d fix(network): rebuild the DHCP hostname when the node is renamed
The hostname was built once in begin() from the node name, so `set name` left
the node advertising its old name to DHCP until the next reflash. It is now
rebuilt on rename through a new CommonCLICallbacks::onNodeNameChanged() hook,
and begin() shares the same helper.

What this cannot do is rename a live lease. IDF 4.4 states that a hostname
changed after the interface is up "would only be reflected once the interface
restarts/reconnects", and Arduino 2.x's WiFi.setHostname() does not touch a
running netif at all — it writes a static string that the netif reads at
bring-up. Forcing the issue would mean bouncing the link, which costs every
MQTT slot a reconnect; that is not a reasonable price for a rename, so the new
name lands at the next reconnect or boot instead.

Only automatic (Ethernet-preferred) links carry a hostname today, exactly as
before. Giving plain Wi-Fi observers one would change the DHCP identity of the
existing fleet and is a separate decision.
2026-09-19 15:57:45 -07:00
mikecarper b981c5cf88 Split MQTT and ESP-NOW controls in Full ESP32 builds 2026-09-17 01:13:10 -07:00
mikecarper 9610cc4245 Add secure management reports and honor GPS off 2026-09-16 20:42:30 -07:00
mikecarper 4fb7b83ac9 Report CLI save failures and validate advert intervals
Roll back failed password and advert changes, propagate identity-store results, and report unsaved common and observer settings. Correct observer filter persistence and KISS OTA capability claims. Add fault-injection and packaging regressions.
2026-09-15 20:05:30 -07:00
mikecarper e2a1828987 Fix storage recovery and deferred runtime state
Recover usable ESP32 preferences and channels before permitting replacement; keep identity and ACL persistence transactional and complete.

Preserve MQTT commit boundaries, restore OTA identity and policy after deferred allocation, retain radio gain retries, and reject invalid flood limits. Add production-path fault regressions and CI coverage.
2026-09-15 16:46:17 -07:00
mikecarper 86defc840c Harden storage transactions and deferred radio settings 2026-09-15 16:01:46 -07:00
mikecarper e9a2326c4f Add WiFi, ESP-NOW and combined wireless CLI controls 2026-09-15 00:01:45 -07:00
mikecarper 088c88507a Add two-profile LoRa operation and radio CLI regression coverage
Implement radio2, tempradio2, radioat2 and tempradioat2 across Mesh roles,
with RX-only/RX+TX operation, optional preambles and persistent cross-TX
policy. Keep temporary OTA traffic on its profile by default and maintain
independent retry ownership and backoff for each profile.

Use slow-first receive scanning with 4.8-symbol visits and automatic
preambles rounded up in steps of eight. Preserve pending RX, restore power
saving on exit, and discard work bound to changed or expired profiles.

Restore the infrastructure path.hash.mode setter and report unsupported
extra.sf settings consistently. Add CLI, scheduling, scan and retry tests,
setup documentation, and the V4/XIAO hardware validation results.

Validation: 1,422 native tests, eight KISS tests, 63 final focused profile
tests, 18 checks from the staged source, sanitizer-enabled OTA transfers,
and builds for V4 Mesh roles, Full XIAO Companion and nRF52 T1000-E.
Hardware checks cover reception, cross-TX policy, expiry, reboot and OTA
discovery while receiving main-channel adverts.
2026-09-13 08:25:00 -07:00
mikecarper 2b4a35adb7 Make repeater RX watchdog MeshCore-aware and tune temporary radio
Use RX-only radio recovery and feed the repeater reboot watchdog after MeshCore parsing. Default to 24 hours, apply temporary watchdog and advert intervals in RAM, and report temporary durations as days, hours, and minutes. Add regression coverage and an ESP-NOW bridge setup guide.
2026-09-11 22:10:13 -07:00
mikecarper 3d4432e848 Restore clearing all neighbors with an empty prefix
Accept the upstream empty-prefix neighbor.remove command after whitespace normalization while preserving invalid-key checks. Cover repeater and room-server removal paths with regression tests.

Fixes #8
2026-09-10 19:33:54 -07:00
mikecarper 1a40a6420c Limit flood advert forwarding and persistent abuse 2026-09-09 17:16:00 -07:00
mikecarper 06c51fdef5 Allow local CLI maintenance across direct connections 2026-09-08 21:44:57 -07:00
mikecarper 4d89de8544 Improve companion setup and USB session recovery 2026-09-02 03:44:28 -07:00
mikecarper 8920c35da5 Harden marathon-tested OTA and hardware paths
Add durable TempRadio, ACL, clock, bridge, GPS/I2C, USB logging, and Indicator recovery safeguards together with expanded automation, build/profile contracts, release metadata, and the hardware validation ledger.
2026-08-30 19:26:15 -07:00
Adam Gessaman da6bab3e83 Merge upstream/dev into observer-firmware-dev 2026-08-28 19:45:59 -07:00
mikecarper da61c48e7b feat: integrate R8 observer and companion updates 2026-08-28 18:39:26 -07:00
mikecarper c24bc82814 Merge upstream dev companion CLI updates 2026-08-28 17:31:28 -07:00
mikecarper 2b3b93ab2f fix: harden ESP-NOW and full companion networking
Add selectable shared ESP-NOW channels, raw/wrapped bridge compatibility, and bounded fragmentation for maximum-size packets.\n\nGive ESP32 Full profiles WiFi coexistence, stabilize WebConfig and USB terminal lifecycles, and keep disabled bridges stopped during observer updates.\n\nUpdate generated UI, firmware selection, documentation, and regression coverage.
2026-08-28 16:36:34 -07:00
mikecarper e5fd77e53f feat: add Bluetooth-controlled LoRa OTA
Add the framed BLE mOTA transport and companion control path, complete the full-profile build and runtime fixes, and document and test the OTA workflow.
2026-08-27 01:22:18 -07:00
mikecarper 9bc95a60fe fix: default advert location to stored preferences 2026-08-25 23:47:40 -07:00
mikecarper 1792acda6a Harden external radio recovery and power limits 2026-08-25 10:27:26 -07:00
Scott Powell 8ccc9928a8 * DynamicConfigSerializer fixes, and unit tests 2026-08-24 19:42:55 +10:00
Scott Powell 845242f4aa * prefs, custom dirty state 2026-08-24 17:22:15 +10:00
Scott Powell 5a162ff4c6 * new DynamicConfigSerializer
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
mikecarper f2d4ffbb7e Unify full firmware profiles and add dual USB logging 2026-08-23 19:22:45 -07:00
mikecarper b699e552ec Add secure host CLI bridge and harden OTA workflows
Expose the Full Companion terminal over TCP and add an authenticated, replay-resistant host command service with documented CPU temperature, reboot, and allowlisted program examples.\n\nImprove LoRa OTA diagnostics and persistent CLI handling, reduce clock correction drift to ten minutes, and make mOTA stream flush behavior an explicit transport policy with regression coverage.
2026-08-23 15:29:30 -07:00
Scott Powell 47b0b7b3b8 * T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Scott Powell b4f7e941fa * CommonRadioPrefs refactors done 2026-08-23 17:30:30 +10:00
Scott Powell 41588d8052 * adding new CommonRadioPrefs
* refactor: moving various radio CLI handling to CommonRadioPrefs
2026-08-23 14:45:15 +10:00
mikecarper a39bbbd467 Add normalradio to common CLI 2026-08-19 12:44:49 -07:00
mikecarper 47993d178e Update MeshCore features and OTA layout handling 2026-08-18 23:17:42 -07:00
mikecarper 818f610ba3 Fix Cascade power saving, USB Companion, and mOTA flows 2026-08-18 14:02:10 -07:00
agessaman dec4a995ea fix(mqtt): undo a failed /mqtt.json publish instead of claiming a rollback
Publishing moves the old primary to .bak before the verified temp takes
that name, so a failed second rename left the new image exactly where
boot recovery promotes it — while the observer setter told the operator
the change had been rolled back. The refused value came back at the next
reset.

Restore the backup and discard the temp on that path, and distinguish
CommitIndeterminate from CommitFailed when the filesystem cannot be put
back, so the CLI reply says the flash state is unresolved rather than
claiming the change is gone. The indeterminate condition latches for the
boot: the artifact left behind also makes every later transaction fail to
begin, so it cannot clear itself.

Also state the version-first rule the future-version probe depends on.
The probe reads the root version with this firmware's grammar, so a newer
file that introduces unknown syntax ahead of that field reads as corrupt
rather than future and loses its preservation guarantee.

Tests: publish-failure rollback and the indeterminate outcome against a
SPIFFS-shaped store fake; the version-first writer invariant and the cost
of violating it; /prefs.json coverage for the strict shape checks
(deployed-shape file, unknown nested groups, torn files, mismatches).
2026-08-15 15:09:55 -07:00