Expose the Full Companion terminal over TCP and add an authenticated, replay-resistant host command service with documented CPU temperature, reboot, and allowlisted program examples.\n\nImprove LoRa OTA diagnostics and persistent CLI handling, reduce clock correction drift to ten minutes, and make mOTA stream flush behavior an explicit transport policy with regression coverage.
Picks up upstream MeshCore 1.17.0 and the dev commits that followed it.
Notable upstream content:
- 1.17.0 version/build-date bump in the example MyMesh headers.
- anon_req hardening: reply_path_len is now uint8_t with an isValidPathLen()
bounds check and a 0xFF sentinel; reply_path_hash_size is gone.
- LR2021 support (Meshnology W12, Seeed MeshTracker X1) incl. side detectors,
multi-SF and the new `extra.sf` get/set CLI.
- CustomLFS 0.2.2 -> 0.2.3 (GD25Q64C support).
- kiss_modem envs for several nRF52 variants; ThinkNode M6 GPS/flash fixes.
Conflicts resolved:
- platformio.ini: took upstream's CustomLFS 0.2.3, kept our lib_ignore for
the vendored PsychicMqttClient.
- CommonCLI.h: kept both upstream's USE_LR2021 configSideDetectors() hook and
our fault-alert callbacks.
NodePrefs gains upstream's extra_sf[4], which is not registered with
ConfigSerializer, so /prefs.json layout is unchanged.
Verified: 275/275 native host tests pass; Heltec_v3_repeater_observer_mqtt,
Heltec_v3_repeater and heltec_v4_repeater_observer_mqtt all build.
Three fork-introduced dependencies had leaked into non-ESP32 builds, breaking
every nRF52 and RP2040 target since 7e4f75c9 (2026-04-10):
- The `memory` CLI command called ESP.getFreeHeap()/heap_caps_* unguarded from
shared CommonCLI.cpp. ESP32 output is unchanged; other platforms now report
newlib arena stats, omitting min-ever-free and largest-free-block rather than
substituting numbers that mean something different.
- The vendored PsychicMqttClient (ESP-IDF esp-mqtt) was pulled in by the LDF on
nRF52; nrf52_base now lib_ignores it, matching how RP2040 variants ignore BLE.
- JWTHelper.cpp and MQTTMessageBuilder.cpp are excluded in arduino_base, but 22
variants re-glob helpers/*.cpp after inheriting it, which undoes the exclusion.
Guarding the file contents on WITH_MQTT_BRIDGE is robust against any variant's
filter, and matches helpers/esp32/WebConfigServer.cpp.
Verified: RAK4631 repeater + room server, Heltec T114, T1000-E, Wio WM1110,
Xiao nRF52 and ThinkNode M1 all build. ESP32 observer builds are byte-identical
to before (RAM and flash), and the native suite stays at 267/267.
RP2040 still fails separately: four boards declare the pre-force_ap
startOTAUpdate signature. Not addressed here.
Absorbs 106 upstream commits. Seven files conflicted; the substantive one
was upstream's new JSON ConfigSerializer (PR #2982), which replaces the
binary /com_prefs layout with /prefs.json and makes NodePrefs a
ConfigSerializer subclass.
Prefs migration
- Adopt upstream's ConfigSerializer. writeCommonPrefsImage() and its
documented offsets (0-294) are deleted, along with the now-unreachable
saveCommonPrefsImageAtomically()/CommonPrefsFileStore atomic rename path.
- Load order is /prefs.json, then /com_prefs, then /node_prefs. Upstream
dropped the /node_prefs fallback; it is restored here so devices that
never advanced past that filename keep their config.
- Legacy files are never removed, so migration cannot destroy its own
source and a deferred or failed save simply retries next boot.
- /com_prefs is treated as a format migration only, not an "upgrade", so
it does not trip the bridge.source tx->rx flip on existing nodes.
- The MQTTPrefsAtomicStore legacy gate is retained: the observer tail
recovered from an old-format file still commits to /mqtt_prefs before
/prefs.json is written.
- MQTTPrefs and /mqtt_prefs are untouched; savePrefs keeps its save_mqtt
parameter and now returns upstream's bool.
Fixes to upstream code
- RadioPrefs::structure() bound both "rxgain" and "fem_rxgain" to
rx_boosted_gain, so radio_fem_rxgain was never persisted. Bound to the
correct field.
- discovery_mod_timestamp was dropped from structure(); it gates
'since'-filtered DISCOVER replies and is set on every config change, so
losing it would silently stop discovery responses after a reboot. Added
as "disc_mod".
Merge artifacts repaired
- Restored bblanchon/ArduinoJson to the native test env; a clean but wrong
auto-merge at the lib_deps block boundary dropped it and broke all 19
host test suites.
- Migrated the fork's WebConfig UITask screens off the removed
DisplayDriver::Color enum to upstream's UIColor element types.
- Removed duplicate getCADEnabled() definitions in companion MyMesh.cpp
and simple_sensor SensorMesh.cpp that both sides had added.
- Dropped memset(&_prefs, 0, ...) in the four example meshes; NodePrefs now
has a vtable. guard gains an initializer that memset used to provide.
Other resolutions
- simple_room_server keeps both the fork's discover.* commands and
upstream's new room.post.
- docs/payloads.md taken from upstream, undoing content earlier merges had
reverted (Control data section, split login tables).
Verified: 273/273 host tests pass across native and native_kiss_modem;
Heltec v3 repeater, repeater_observer_mqtt, room_server_observer_mqtt,
sensor, and companion_radio_ble all build clean.
Enhance the MQTT preferences handling by establishing a downgrade
contract that ensures compatibility between different firmware versions.
This contract allows nodes to read settings from newer builds while
safeguarding against data loss during downgrades. The implementation
includes updates to the classification logic, ensuring that longer
payloads from newer versions are handled correctly without rejecting
files, thus preserving critical WiFi credentials and broker settings.
Add support for named packet types in per-slot filters, allowing users
to specify packet types using descriptive names alongside numeric values.
This improves usability and clarity in configuring MQTT slot filters.
Updates include modifications to the parsing logic, WebConfig interface,
and related documentation to reflect the new naming conventions.
Enhance the documentation for the `start ota` command to clarify its
behavior when connected to a Wi-Fi network versus when using the
`start ota ap` option. This provides users with better guidance on
how to initiate OTA updates under different network conditions.
Update commit logic to remove existing destination before renaming
the temporary file on ESP32. This change addresses the SPIFFS_ERR_CONFLICTING_NAME
issue, ensuring that the new preferences are published correctly.
Add tests to validate the new behavior and confirm that the
temporary file is handled appropriately.
mikecarper
Kevin Le
Jarosław Domański
Jarosław Domański
agessaman
taco
IoTThinks