Use repeated status reads at screen initialization and preserve SSD1306 for ambiguous responses. Share the existing framebuffer, drawing, rotation and power handling; use SH1106 page transfers when detected.
Enable this for RAK4631 and RAK3401, including WisMesh Pocket v2/v3. Add controller overrides, protocol tests and CI coverage. Addresses meshcore-dev/MeshCore#3296.
Default fresh settings to sound off and vibration on, and keep existing saved choices. Apply changes immediately across all three UIs and make custom notification patterns respect the same mute controls.
Keep the Wio Mini Companion within its existing flash boundary by storing its LED switch in a reserved preference byte and shortening CLI help without removing commands. Add coverage for live output changes, persistence, and storage failures.
Adapted from https://github.com/meshcore-dev/MeshCore/pull/3603.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Add get leds and set leds on|off for Companion, repeater, room server and
sensor builds. Preserve the setting across reboots and cover GPIO, RGB,
Bluetooth, notification and expander indicators without changing radio
amplifier controls or screen backlights.
RAK Companions blink while advertising and keep the Bluetooth LED off once
connected, including late timer callbacks.
Adapted from meshcore-dev/MeshCore#3605 and #2694.
Validated with host regressions and firmware builds for SenseCAP Solar,
RAK4631, T096, Heltec V4, T-Beam, Xiao S3, Pico W and Wio E5 Mini.
Co-authored-by: R0ck <develop@hectospark.co.uk>
Co-authored-by: Nick Dunklee <nick@dunklee.org>
Retain supported LR2021 bandwidths and reject frequency gaps. Enable LR1121 high-band bandwidth selection and account for its forced LDRO in profile and beacon airtime.
Cover all eight chip families with production-method regression tests.
Revoke fast-RX ownership before CRC, header and IQ setters, including failed writes. Cover normal RX rebuilds and unchanged defaults with production-method tests.
Add receive-only same-image display, SPI, modem/IQ-cache and scoped-priority experiments with checkpointed collectors. Keep rejected clock-phase correction and elevated-priority experiments out of production.
Publish sanitized timing data, Full Companion/Bluetooth/USB checks and redraw measurements with their limits. Wire the new behavioral checks into CI.
Reuse the confirmed LoRa modem only inside acknowledged warm continuous-RX hops and revoke that capability before modem initialization or after failures.
Opt the tested T-Deck into IQ workaround reuse and an exact 8,888,888 Hz SPI setting. Keep the existing BUSY, packet-ownership and recovery checks; other boards retain their modem-cache default.
Render into a PSRAM canvas and release the shared SPI bus between bounded TFT strips. Service only the radio driver at cooperative checkpoints and use the buffered radio HAL, preserving packet and transmit guards.
Cover pixel parity, transaction boundaries, allocation failure, partial updates and sleep/wake behavior with native tests.
Use the committed node credential for setup WiFi, WebConfig and browser OTA. Add persistent ESP32 WiFi Companion management credentials without changing preferences layouts, revoke stale browser sessions on rotation, retain scoped save receipts, and coordinate credential changes with flash uploads. Keep external-service credentials and trusted TCP protocol compatibility independent. Update live join QR codes, failure handling and documentation.
Validated 51 native cases, 158 related host and browser methods, and serial Full V4 Companion, Station G3 Repeater, ESP32-C6 Room Server and V4 Sensor firmware builds.
Deduplicate validation and preserve the published preference bytes and transactional saves. Correct Ikoka Handheld Companion flash bounds and document QSPI Room migration. Qualify STM32 and RAK4631 at the full 1.18.0.1 release version length.
Integrate fractional Companion timezones and conditional Bluetooth pages while preserving the existing preference byte layout, transactional saves, and Full transport selector. Add migration, rollback, invalid-value, and UI profile regressions.
mikecarper
