Bring in Wio Tracker L2 Pro, RAK3401/TrackerV2 RS232 recipes and explicit FEM-on defaults. Keep qualified runtime FEM ownership and GPS semantics; retain old V4 target aliases and Bash build entry points. Pin the upstream RadioLib 7.8.1 release exactly instead of an open-ended dependency range.
Integrate upstream 1.18.0, delayed direct ACK forwarding, zero-scope routing, Waveshare LR1121 and dynamic WiFi variants. Preserve fork chemistry-aware power management and bounded multi-interface UI; retain retry/dedup safety while adding upstream ACK delay. Qualify LR1121 band power and HP-only Morse handling with native regressions.
Add acknowledged SetFs and packet-cache shortcuts for SX1262, extend the LR1110 FS-mode fast path with buffered SPI, and keep the expander-backed Indicator on its previous path. Include HIL fixtures, validation notes, and regression tests.
Nothing has ever read it. The slot count comes from two other places: the
persisted array size (MAX_MQTT_SLOTS / RUNTIME_MQTT_SLOTS in MQTTPresets.h) and
the runtime cap MQTTBridge::getMaxActiveSlots(), which answers 5 with PSRAM and
2 without. A flag reading MAX_MQTT_BROKERS=3 sitting in every observer env
implies a third, lower limit that does not exist — it cost me a wrong answer
about how many MQTT slots a Heltec V4 exposes.
36 lines across 15 variants, all of them =3. Removing an unread -D cannot change
code: heltec_v4_repeater_observer_mqtt builds to a byte-identical size before and
after (1647744). The image checksum does differ, but so does it between two
clean builds of untouched source — ESP-IDF stamps the app descriptor with the
build time — so size is the meaningful comparison here.
All 606 envs still parse; heltec_v4, heltec_v3, station_g2, rak3112 and
xiao_s3_wio observer targets all build.
Absorbs 106 upstream commits. Seven files conflicted; the substantive one
was upstream's new JSON ConfigSerializer (PR #2982), which replaces the
binary /com_prefs layout with /prefs.json and makes NodePrefs a
ConfigSerializer subclass.
Prefs migration
- Adopt upstream's ConfigSerializer. writeCommonPrefsImage() and its
documented offsets (0-294) are deleted, along with the now-unreachable
saveCommonPrefsImageAtomically()/CommonPrefsFileStore atomic rename path.
- Load order is /prefs.json, then /com_prefs, then /node_prefs. Upstream
dropped the /node_prefs fallback; it is restored here so devices that
never advanced past that filename keep their config.
- Legacy files are never removed, so migration cannot destroy its own
source and a deferred or failed save simply retries next boot.
- /com_prefs is treated as a format migration only, not an "upgrade", so
it does not trip the bridge.source tx->rx flip on existing nodes.
- The MQTTPrefsAtomicStore legacy gate is retained: the observer tail
recovered from an old-format file still commits to /mqtt_prefs before
/prefs.json is written.
- MQTTPrefs and /mqtt_prefs are untouched; savePrefs keeps its save_mqtt
parameter and now returns upstream's bool.
Fixes to upstream code
- RadioPrefs::structure() bound both "rxgain" and "fem_rxgain" to
rx_boosted_gain, so radio_fem_rxgain was never persisted. Bound to the
correct field.
- discovery_mod_timestamp was dropped from structure(); it gates
'since'-filtered DISCOVER replies and is set on every config change, so
losing it would silently stop discovery responses after a reboot. Added
as "disc_mod".
Merge artifacts repaired
- Restored bblanchon/ArduinoJson to the native test env; a clean but wrong
auto-merge at the lib_deps block boundary dropped it and broke all 19
host test suites.
- Migrated the fork's WebConfig UITask screens off the removed
DisplayDriver::Color enum to upstream's UIColor element types.
- Removed duplicate getCADEnabled() definitions in companion MyMesh.cpp
and simple_sensor SensorMesh.cpp that both sides had added.
- Dropped memset(&_prefs, 0, ...) in the four example meshes; NodePrefs now
has a vtable. guard gains an initializer that memset used to provide.
Other resolutions
- simple_room_server keeps both the fork's discover.* commands and
upstream's new room.post.
- docs/payloads.md taken from upstream, undoing content earlier merges had
reverted (Control data section, split login tables).
Verified: 273/273 host tests pass across native and native_kiss_modem;
Heltec v3 repeater, repeater_observer_mqtt, room_server_observer_mqtt,
sensor, and companion_radio_ble all build clean.
Implement SNMP functionality in MyMesh to provide radio diagnostics
and statistics updates. This includes a new method for formatting
radio diagnostic replies and periodic updates to the SNMP agent
with radio stats, enhancing monitoring capabilities for users
with SNMP enabled.
Add support for neighbor discovery and management in the MyMesh class.
This includes structures for neighbor information, methods for handling
neighbor advertisements, and control data reception. The new features
allow for dynamic neighbor management, enhancing the mesh network's
capabilities. Additionally, the maximum number of neighbors is set to
50 across various platform configurations.
The 2026-07-19 upstream merge auto-merged two additions into the same class
bodies without conflicting, producing duplicate declarations:
examples/simple_room_server/MyMesh.h - getCADEnabled()
variants/heltec_v4/HeltecV4Board.h - setLoRaFemLnaEnabled(),
canControlLoRaFemLna(),
isLoRaFemLnaEnabled()
Same class of breakage as the RadioLibWrapper::_cad_enabled and
MyMesh::getCADEnabled() duplicates already fixed in the merge commit. These
survived because the merge was validated with the two prescribed MQTT smoke
builds, and neither of them compiles simple_room_server or the heltec_v4
variant - so CI was the first thing to touch the broken files.
Now verified across ALL 32 observer envs locally, not a sample: 32/32 build.
mikecarper
liamcottle
Kevin Le
Michael Graff
Scott Powell
agessaman