Improve companion BLE delivery and idempotent remote CLI retries, make FPF7 persistence atomic with FPF6 migration, verify staged OTA data on resume, and clarify filter policy wildcard and BlackHole semantics.
Neighbors publication was gated on BOARD_HAS_PSRAM. Removing that gate alone
was not enough: the feature built but was inert without PSRAM, because three
allocation sites asked for MALLOC_CAP_SPIRAM (which returns null with no
PSRAM), the bridge's persistent buffer was allocated inside a BOARD_HAS_PSRAM
block, and neighborDiscoverReady() rejected every pass at runtime on
psramFound(). The entry table also did not fit: finishNeighborDiscover put
pubkey_hex[50][65] plus entries[50] on the stack, a 4752-byte frame against
the mesh loop task's 8 KB.
- Gate on MAX_NEIGHBOURS plus PSRAM or an explicit per-variant
MQTT_NEIGHBORS_WITHOUT_PSRAM opt-in.
- Move the entry table and its hex strings into one heap block sized to the
pass; the frame drops from 4752 to 304 bytes.
- Prefer PSRAM and fall back to internal DRAM in the mesh-side allocations
and the ArduinoJson pool; hoist the bridge's persistent buffer out of the
BOARD_HAS_PSRAM block (psram_malloc already falls back).
- Keep the runtime psramFound() check only where the buffers are sized for
PSRAM, so a board whose PSRAM failed to init still refuses.
- Size for internal DRAM without PSRAM: 4 KB text buffer and 20 entries per
publish, keeping the pool to a single block and the peak near 13 KB rather
than ~35 KB. Oversized tables truncate and report total_neighbors as before.
Enabled on the ESP32-S3 observer envs (Heltec V3/WSL3, RAK3112, Heltec
Tracker v1.1/v2). Left off for the classic ESP32 T-LoRa V2.1-1.6, which is
already limited to one active TLS slot.
Costs ~7.4 KB static DRAM on repeaters and ~9.6 KB on room servers. The
prefs layout is unchanged, so this is neutral for existing devices.
ArduinoJson v7 hands out document-pool blocks in fixed 4096-byte chunks, so
the pool is not bounded by the size of the text it serialises to. Budgeting
it at NEIGHBORS_JSON_BUFFER_SIZE starved it once the table grew: a 50-entry
table needs 12541 B of pool against the 10240 B cap, and a starved allocator
sets doc.overflowed(), which makes buildNeighborsMessage return 0 and drop
the entire publish rather than truncating the tail.
Repeaters with roughly 40 or more neighbours therefore published no neighbors
message at all, silently, while smaller tables published normally.
Give the pool its own NEIGHBORS_DOC_POOL_BUDGET and add an explicit
NEIGHBORS_MAX_PUBLISH_ENTRIES cap alongside the existing text-size check.
A neighbour heard before the clock is set carries the firmware's unset-clock
default (1715770351, 15 May 2024). Subtracting that from an NTP-synced clock
published ages of ~806 days for neighbours that had just answered a live scope
query, and a backwards clock step reported 0, i.e. "heard just now".
- finishNeighborDiscover() reports the age as unknown ("heard_secs_ago": null)
when the stored stamp and the current clock come from different epochs, or
when the clock has stepped backwards
- handleNeighborDiscoverResponse() re-stamps heard_timestamp on a zero-hop scope
reply, in both the snapshot and the live table, so entries heal once per
discovery cycle instead of waiting for the neighbour's next advert
- publish ordering places usable ages ahead of unknown ones so a poisoned stamp
cannot displace fresh entries when the JSON buffer truncates
- document the null case, and the always-present total_neighbors /
queried_neighbors / truncated fields the payload sample omitted
- add UPSTREAM_BUGS.md, tracking the monotonic-uptime fix to propose upstream
plus the unclamped subtraction in the companion and CLI readouts
Containment only: upstream still stamps neighbours from the wall clock at
packet-reception time, which on a cold boot always precedes NTP.
Absorbs 106 upstream commits. Seven files conflicted; the substantive one
was upstream's new JSON ConfigSerializer (PR #2982), which replaces the
binary /com_prefs layout with /prefs.json and makes NodePrefs a
ConfigSerializer subclass.
Prefs migration
- Adopt upstream's ConfigSerializer. writeCommonPrefsImage() and its
documented offsets (0-294) are deleted, along with the now-unreachable
saveCommonPrefsImageAtomically()/CommonPrefsFileStore atomic rename path.
- Load order is /prefs.json, then /com_prefs, then /node_prefs. Upstream
dropped the /node_prefs fallback; it is restored here so devices that
never advanced past that filename keep their config.
- Legacy files are never removed, so migration cannot destroy its own
source and a deferred or failed save simply retries next boot.
- /com_prefs is treated as a format migration only, not an "upgrade", so
it does not trip the bridge.source tx->rx flip on existing nodes.
- The MQTTPrefsAtomicStore legacy gate is retained: the observer tail
recovered from an old-format file still commits to /mqtt_prefs before
/prefs.json is written.
- MQTTPrefs and /mqtt_prefs are untouched; savePrefs keeps its save_mqtt
parameter and now returns upstream's bool.
Fixes to upstream code
- RadioPrefs::structure() bound both "rxgain" and "fem_rxgain" to
rx_boosted_gain, so radio_fem_rxgain was never persisted. Bound to the
correct field.
- discovery_mod_timestamp was dropped from structure(); it gates
'since'-filtered DISCOVER replies and is set on every config change, so
losing it would silently stop discovery responses after a reboot. Added
as "disc_mod".
Merge artifacts repaired
- Restored bblanchon/ArduinoJson to the native test env; a clean but wrong
auto-merge at the lib_deps block boundary dropped it and broke all 19
host test suites.
- Migrated the fork's WebConfig UITask screens off the removed
DisplayDriver::Color enum to upstream's UIColor element types.
- Removed duplicate getCADEnabled() definitions in companion MyMesh.cpp
and simple_sensor SensorMesh.cpp that both sides had added.
- Dropped memset(&_prefs, 0, ...) in the four example meshes; NodePrefs now
has a vtable. guard gains an initializer that memset used to provide.
Other resolutions
- simple_room_server keeps both the fork's discover.* commands and
upstream's new room.post.
- docs/payloads.md taken from upstream, undoing content earlier merges had
reverted (Control data section, split login tables).
Verified: 273/273 host tests pass across native and native_kiss_modem;
Heltec v3 repeater, repeater_observer_mqtt, room_server_observer_mqtt,
sensor, and companion_radio_ble all build clean.
Enhance the neighbor discovery JSON structure by introducing a
default_scope field, which indicates the region name this node
floods to by default. This change improves clarity in the
neighbor discovery process and aligns with the unscoped flood
behavior when no default region is set. Updates include
modifications to the MyMesh class and related message building
functions to accommodate the new field.
mikecarper
Hacuchino-hash
ripplebiz
agessaman
liamcottle
Kevin Le
taco
ViezeVingertjes
IoTThinks
Che177