Introduce per-slot packet filters to allow users to specify which
packet types are uploaded for each MQTT slot. This feature enhances
the flexibility of the MQTT bridge by enabling users to configure
allowlists for packet types, improving the efficiency of data
transmissions. The implementation includes updates to the WebConfig
interface, internal handling of packet filters, and necessary
modifications to the MQTT preferences structure.
Adds an admin-password field to the setup wizard and the LAN editor, so a
node's password can be set during onboarding and rotated later without a
serial console.
The key maps to the top-level `password` CLI command rather than a `set`
handler, so it is classified separately from WC_ALLOWED_SET_KEYS. It is the
only key granted that treatment, which keeps the allowlist the sole route to
`set` and leaves no general path from a batch to arbitrary CLI commands.
Accepted in both modes: MODE_OFF is refused earlier in handleConfigPost, LAN
required a login to get that far, and the setup AP implies physical proximity.
Restricting rotation to the AP would have forced a bridge outage (`set bridge
off` + `start webconfig ap`) just to change a password.
First onboarding is gated server-side: while the setup AP is up and no WiFi is
configured, a batch that reboots or sets wifi.ssid must also carry a password,
so neither the Advanced editor nor a crafted request can save WiFi and strand
the node on the factory password. The flag is latched at AP start, so a save
that fails partway cannot drop the requirement on retry.
The CLI's `password` command echoes the new secret back in its reply, and
replies are served to the client over the open setup AP, so the reply is
overwritten with "OK" before it can be serialized.
UI: the field lives with the other NodePrefs settings (wizard step 2, and the
Node card on the Radio tab) rather than beside the WiFi password, which is a
different credential. Confirm fields mirror their password twin and are cleared
whenever it is, so a stale confirm value cannot fail a later save as a spurious
mismatch. Validation runs ahead of the WiFi-changed split so a password-only
save is still checked, and reveals the Radio tab before reporting, since the
save bar spans every tab.
- Allow mqtt.neighbors and mqtt.neighbors.interval in the WebConfigKeys set-key
allowlist (the CLI enforces the PSRAM guard; the stub reply handles non-PSRAM).
- Emit neighbors + neighbors_interval (hours) in the WebConfigServer config JSON.
- Add a "Publish neighbors" toggle and a "Neighbors interval (hours)" field
(12-336) to the Publishing card, with getVal() cases in webui/index.html.
- Cover both keys in test_webconfig_keys.
WebConfigHtml.h is a gitignored build artifact regenerated by the pre-build
hook from index.html, so it is not committed. Verified: test_webconfig_keys
passes and the T_Beam_S3_Supreme observer_mqtt firmware builds [SUCCESS].
First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files
conflicted; resolutions below.
Fleet-critical check (Constraint 1): upstream reordered NodePrefs members
(rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change
/com_prefs. Persistence is written field-by-field at explicit offsets, so member
order is in-memory only. Verified the fork's writeCommonPrefsImage() is
byte-identical to upstream's inline writer at every offset (79 pad, 121, 122,
290-294). No migration needed.
Resolutions:
- CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's
setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to
report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at
offset 79 (it is a pad; the field is at 290).
- CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted
writeCommonPrefsImage() call.
- UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off
screen, plus the fork's WITH_WEBCONFIG portal/reboot screens.
- ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions
alongside upstream powerOff/enterDeepSleep and Packet.cpp).
- MicroNMEALocationProvider.h: took upstream's claim/release and added the
_claims member they depend on.
- MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults.
- Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled
and MyMesh::getCADEnabled().
Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both
MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
The pure batch/reboot/stop state machine in WebConfigBatch.h was host-tested
but not referenced by production, so the real logic in WebConfigServer.cpp was
untested and the two could drift silently.
Repoint the production decision points at the spec: POST classification and
replay-state naming, drain pacing/all-ok/finish, reboot scheduling and firing,
result classification, confirm-reboot arming, and stop gating. MAX_BATCH and
STOP_WARN_MS now alias kMaxBatch/kStopWarnMs so the constants cannot drift.
Behavior-preserving. Two asymmetries are deliberate and documented in the
header: finishRebootAt()'s 0 return must not be assigned unconditionally
(the manual /api/reboot route also owns _reboot_at and could be cancelled),
and classifyPost() is consulted in two phases because the change count is
only known after parsing, which must not precede the Replay/Busy answer.
Native suite (14 suites) and both MQTT smoke builds green.
Improve the mqttSubstituteTopic function to ensure that it reports
overflow when the output buffer is full, preventing silent truncation
of topics. Update related tests to verify the new behavior for
literal overflow and exact fit scenarios, enhancing robustness and
correctness of topic handling.
Add validation for request IDs in the web configuration server to ensure
they conform to the expected format. Enhance error responses for invalid
or unknown request IDs, improving the robustness of request handling.
Update the web UI to reflect these changes, ensuring that clients can
properly handle errors related to request ID mismatches.
Include detailed instructions for local testing of observer and WiFi
functionality without hardware. Document the use of a mock backend and
Wokwi ESP32-S3 simulation for easier development and testing.
Enhance the MQTT implementation documentation to improve developer
experience and facilitate testing workflows.
Enhance the WebConfigServer to track in-flight requests, ensuring that
the server is only freed once all requests have completed or a hard
timeout has been reached. This prevents crashes due to live connections
during server deletion. Update route handlers to log requests and
manage their lifecycle more effectively, improving stability and
performance of the web configuration portal.
Introduce a web configuration portal for easier node management and
provisioning without serial CLI. Enhance MQTT functionality with
improved IATA code validation, dynamic slot management, and
background NTP synchronization. Update web UI elements for better
user experience and security notes regarding open AP usage.
Add new configuration options for flood traffic management and loop
detection in the web interface. This includes parameters for maximum
flood hops, maximum advert hops, and loop detection modes, improving
the control over mesh network behavior.
ESP-NOW radios (ie, Generic_ESPNOW_* variants) do not compile due to
missing methods
Changes in January 2026 (019bbf74) to add additional stats (receive errors)
to CMD_GET_STATS was not implemented in the ESPNOWRadio() class
Changes in March 2026 (9a95e25e) to add setRxBoostedGainMode to all devices
rather than just SX1262/SX1268 were not applied to the ESPNowRadio() driver
Specifically, this change adds the following to ESPNOWRadio()
* getPacketsRecvErrors() - always returns 0
* getRxBoostedGainMode() - always returns false
* setRxBoostedGainMode() - does nothing
There is a lot to this PR, so if there are any questions let me know.
The idea here is to merge T-Beam fw so that there is less redundant code. Most versions (except the 0.7) share PMU code, init sequence, and most IO pin definitions.
- Merged all T-Beam board.h files into one TBeamBoard.
- Added PMU code to identify different AXP chips.
- Modified "lilygo tbeam SX1276" variant to cover all T-Beam SX1276 versions
- Modified "lilygo tbeam SX1262" variant to cover all T-Beam SX1262 versions
- Enabled GPS on all T-Beam versions/models
- Enabled BME280 on the Supreme
I am also updating EnvironmentSensorManager to allow for boards that do or don't have GPS enable pins, as well as a PERSISTANT_GPS define check for boards that want GPS to stay active after boot.