An operator who triggers `ota update` via remote management only sees the
command's reply; the actual OTA runs ~2.5s later and reboots on success,
so the start/fail notifications land outside the reply window. Mirror the
key OTA milestones onto the configured alert channel (in addition to the
Serial log):
- START ("OTA update starting") from beginDeferredOtaUpdate(), i.e. while
the loop still runs -- a flood queued at the deferred fire could never
transmit before the flash blocks the loop / reboots on success.
- FAIL ("OTA aborted: ...") at both abort points (teardown barrier
withheld flashing; preflight/download error).
Success has no message: a successful flash reboots into the new image, so
the node returning on the new version is the signal.
New MyMesh::otaAlert() gates on the `alert on/off` master switch and rides
the configured alert scope (AlertReporter::sendText -> sendChannel ->
resolveAlertScope); no-op when alerts are off or no channel is set. Only
these start/fail milestones -- routine slot connect/disconnect is
unaffected (stays in AlertReporter's fault logic). Documented in ALERTS.md.
Both observer firmwares build.
Introduce a web configuration portal for easier node management and
provisioning without serial CLI. Enhance MQTT functionality with
improved IATA code validation, dynamic slot management, and
background NTP synchronization. Update web UI elements for better
user experience and security notes regarding open AP usage.
Continues restoring features dropped by the 22eb9b87 revert. Both were
upstream-tested code, not intentional fork removals.
CAD (hardware Channel Activity Detection / listen-before-talk before TX),
fully restored and functional:
- NodePrefs.cad_enabled + `set cad on/off` / `get cad` CLI (default off)
- RadioLibWrapper: _cad_enabled + setCADEnabled() + the scanChannel()/CAD
branch in isChannelActive() (Phase 1 already restored the Dispatcher hook)
- getCADEnabled() overrides in the repeater/room/sensor apps (return the
pref) and companion (always on, matching upstream)
radio_fem_rxgain: the NodePrefs field + /com_prefs persistence are restored
here at upstream's exact offsets (293 fem, 294 cad), which makes /com_prefs
byte-identical to upstream through the tail. The field is persisted and
defaults on (upstream default), but the per-board LNA *driving* + the
`radio.fem.rxgain` CLI are deferred to the FEM-hardware change (they depend
on board methods and want per-board bench testing).
The new-format /com_prefs tail grows from 3 to 5 bytes; the old-format
detection threshold and the host migration harness are updated accordingly
(all scenarios pass, incl. the non-MQTT-build variant).
Builds: Heltec_v3 repeater, repeater-observer, room-observer. (sensor /
plain-room / companion fail only on the pre-existing Timezone.h include
issue, unrelated to these changes.)
Refactored the handling of observer-related settings by moving them from
NodePrefs to a new MQTTPrefs structure. This change centralizes MQTT,
WiFi, timezone, SNMP, and alert configurations, improving code organization
and maintainability. The new structure allows for better separation of
concerns and prepares the codebase for future enhancements.
Implemented new commands for configuring and diagnosing NTP server
settings in the MQTT bridge. Users can now set a custom NTP server
and probe connectivity to configured servers. This enhancement
improves time synchronization reliability for JWT authentication
and provides better diagnostics for NTP connectivity issues.
Added support for deferred OTA updates in the MyMesh class, allowing
the system to schedule firmware updates to occur after a confirmation
reply is sent. This change improves the user experience by ensuring
that the update process does not block the main application loop,
allowing for smoother operation during firmware updates.
Updated the fault alert functionality to include an optional region name for scoping alert floods, allowing operators to override the default scope. Introduced a list of banned channels (e.g., Public PSK, `#test`, `#bot`) to prevent spamming community channels with alerts. The implementation ensures that alerts are only sent to private PSKs or non-banned hashtags. Relevant changes were made across multiple files, including updates to the CLI for setting and retrieving the new `alert.region` preference.
Implemented a new fault alert system that broadcasts notifications over LoRa when WiFi or MQTT connections are down for a specified duration. The alerts are configurable via CLI commands, allowing operators to set private PSKs or hashtags for alert channels. Default settings for alert thresholds and intervals are established, and the system ensures that alerts do not spam the public channel. Updated relevant files to integrate this feature into the MyMesh implementations and CLI handling.
Introduced a new CLI command to view and set the radio watchdog interval, allowing users to configure the watchdog timeout in minutes (0 to disable, 1-120 for active). Updated the documentation to reflect this addition and clarified the parameters for the `neighbor.remove` command. Default watchdog interval is set to 5 minutes in the codebase.
* room server: added RegionMap, and new CommonCLI wiring, default_scope handling
* sensor: only minimal RegionMap wiring. Still needs work to handle default-scope
Implement a new method `formatRadioDiagReply` in MyMesh to format and return radio diagnostic information. Update CommonCLI to handle the new command for retrieving radio diagnostics. Enhance the Dispatcher class with a radio watchdog feature to monitor and recover from silent radio states. Introduce new error flags and methods in the Dispatcher and RadioLibWrapper classes to support these diagnostics, improving overall radio management and troubleshooting capabilities.
Reverted prior dev merge, then merged current meshcore-dev dev. Resolved
CommonCLI by restoring MQTT prefs flow with upstream com_prefs layout
(rx_boosted_gain at offset 79), rxgain CLI, poweroff/shutdown, and FEM
variant files from upstream.
Made-with: Cursor
Resolve conflicts: keep MQTT/WiFi/timezone/analyzer defaults and get
handlers, add upstream neighbour sort guard, adc_multiplier and
pending_discover, and bootloader.ver get handler.
Co-authored-by: Cursor <cursoragent@cursor.com>
Resolve conflict in heltec_tracker_v2/platformio.ini: keep
SX126X_REGISTER_PATCH=1 from upstream and retain GC1109 comment.
Co-authored-by: Cursor <cursoragent@cursor.com>
This change counts when readData returns an err code other than RADIOLIB_ERR_NONE. In most cases this is going to be a CRC error. This counter is exposed in the `stats-packets` command, and in the repeater stats payload (4 additional bytes to the payload, which is now 56 bytes with this change. My incompetent robot claims the total payload size is 96 bytes (unverified but probably close).