Integrate compatible observer board, preset, WebConfig, display, CI, and policy updates. Preserve the checkout's newer MQTT binary preferences and WiFi bridge runtime where the forked implementations conflict. Keep ThinkNode observer networking WiFi-based until the Ethernet transport is wired into that runtime.
Add acknowledged SetFs and packet-cache shortcuts for SX1262, extend the LR1110 FS-mode fast path with buffered SPI, and keep the expander-backed Indicator on its previous path. Include HIL fixtures, validation notes, and regression tests.
Drop BLE_TX_POWER=0 from the companion envs so they use the default of
4 dBm, like most other variants. The lower power was carried over from
the original Base Duo PR and real-world range is better at the default.
- rename the board class and files to MuziBaseBoard
- uppercase the build flags (MUZI_BASE, MUZI_BASE_SUPERIO)
- name the superIO envs muzi_base_{duo,uno}_superIO_companion_radio_ble so
build.sh picks them up
- set MAX_CONTACTS to 350 like the other variants
- move the pin setup from initVariant() into MuziBaseBoard::begin()
Fold the CH390 overlay and NETWORK_PREFER_ETHERNET into
ThinkNode_M7_{repeater,room_server}_observer_mqtt and drop the separate
*_observer_mqtt_ethernet twins. The env names (and so the OTA manifests)
are unchanged, so existing M7 observers OTA into the Ethernet-preferred
image; without a cable they select stored Wi-Fi after a brief boot probe.
The upstream/dev merge kept our side of variants/thinknode_m7/platformio.ini,
losing -D ENABLE_WIFI_INTERFACE and +<helpers/wifi/*.cpp>. Companion WiFi is
now gated on that flag, so the env built silently without WiFi.
Keep TCXO warm during owned dual-profile retunes, batch modulation setup, and enable guarded fast RX with buffered 8 MHz SPI on XIAO S3 WIO and Indicator LoRa. Preserve lifecycle invalidation, packet guards, rollback, and existing scheduling budgets.
Add reliable sequence-scoped USB lab transport, native regression coverage, bounded channel and preamble diagnostics, and byte-exact measurement records including failed experiments and qualification limits.
One nRF52840 variant shared across both radios, picked per env: Duo runs
the LR1121, Uno the SX1262. Same PCB, only the radio and its DIO1 pin
change.
SuperIO adds the SH1107 OLED, GPS, buzzer and joystick. GPS is driven by
the 3-position mode switch (Mode 2 = on), polled live the way thinknode_m1
does it.
Five quick user-button presses power the unit off; a press wakes it back
on (arms the button as an nRF52 GPIO SENSE source before SYSTEMOFF).
Consolidates #2054 and andyshinn's shared-base/uno work, rebased on dev.
Co-authored-by: lbibass <ewdries02@gmail.com>
Co-authored-by: Andy Shinn <andys@andyshinn.as>
Integrate ExpressLRS TX module support and its stacked ESP32 heap changes.
Use the approved Linkflow calibration (17-30 dBm), preserve the PA drive
and output path after radio recovery, and keep LoRa OTA enabled.
Preserve stored ACLs and filters on allocation failure, release owned
client/filter buffers, service heap OTA contexts on Companions, release
self-serving workspaces after TempRadio, and reset staged-resume state
when a context is released. Keep manual staging and active operations
alive. Account for all moved allocations in the runtime RAM gate.
Validation: 1,393 native cases; radio-power, heap-context, ACL persistence,
shared-queue transfer, display/inbox, radio receive, and memory regressions.
Firmware builds passed for Linkflow, Heltec V2 Companion, T-Beam MQTT
repeater, Heltec V4 R8 MQTT repeater, RAK4631 repeater, and Indicator Full.
Physical verification awaits access to the currently offline lab Pi.
Persist separate display modes and timeouts in seconds for battery and USB power, expose four controls in WebConfig and CLI, and apply one shared policy across display-equipped roles.
Detect R8 external power from a USB host or calibrated battery voltage above 4.21 V, with cached sampling and hysteresis. Add policy, persistence, browser, and R8 power-detection regression coverage.
Port the measured RXPS model without changing Cascade wire preambles or automatically enabling experimental levels. Use a spaced weighted median with bounded calibration windows, preserve packet ownership across CAD, and check actual SX126x receive mode before recovery.
Preserve Cascade sleep and radio fixes, integrate the new sensor and board profiles, and correct BSEC script inheritance and the MKE UART pin conflict. Native regressions, production-method/SPI harnesses, and ESP32, nRF52, and STM32 builds pass. Hardware comparison and fault-injection validation are recorded privately.
mikecarper
Liam Cottle
Wessel Nieboer
Florent
TJ Downes
agessaman
Kevin Le
Scott Powell
