Improve the response message for the `alert test` command to clarify
that a successful test send does not guarantee automatic alerts are
enabled. This change helps prevent confusion for operators regarding
the status of the alert system after testing.
Port the neighbor-discovery state machine from mqtt-bridge-implementation-flex,
adapted to this branch's MyMesh (WebConfig members shifted the insertion points;
applied by content).
- Two-stage periodic refresh in loop() driven by mqtt_neighbors_interval:
stage 1 is a zero-hop sendNodeDiscoverReq() (reuses the existing 60s window),
stage 2 (startNeighborDiscover) fires one anon-regions scope query per heard
neighbour, then finishNeighborDiscover() builds the table JSON via
MQTTMessageBuilder::buildNeighborsMessage and hands it to
bridge->requestPublishNeighbors().
- Peer overlay at NEIGHBOR_DISCOVER_PEER_BASE lets scope-query RESPONSE packets
from non-ACL neighbours decrypt: searchPeersByHash prepends heard neighbours
(bounded by MAX_CLIENTS), getPeerSharedSecret derives the secret on the fly,
and onPeerDataRecv routes both overlay-index and ACL-client-that-is-a-neighbour
responses into handleNeighborDiscoverResponse.
- Entries ordered most- to least-useful (recent, then stronger SNR) so the JSON
builder's tail-drop keeps the useful head.
- `discover.scopes` CLI command (manual trigger), with a WITH_MQTT_BRIDGE stub
replying "requires PSRAM" on non-PSRAM builds.
- Reports schedule to the bridge each loop via setNeighborsSchedule().
- Uses ArduinoJson v7 JsonDocument (not deprecated DynamicJsonDocument).
All gated on WITH_MQTT_NEIGHBORS. Reuses the existing MQTTBridge* member.
Verified: T_Beam_S3_Supreme_SX1262_repeater_observer_mqtt builds [SUCCESS].
First upstream merge since the 2026-06-06 base (191 upstream commits). 14 files
conflicted; resolutions below.
Fleet-critical check (Constraint 1): upstream reordered NodePrefs members
(rx_boosted_gain / path_hash_mode moved to the struct tail) but did NOT change
/com_prefs. Persistence is written field-by-field at explicit offsets, so member
order is in-memory only. Verified the fork's writeCommonPrefsImage() is
byte-identical to upstream's inline writer at every offset (79 pad, 121, 122,
290-294). No migration needed.
Resolutions:
- CommonCLI.h: kept the fork's NodePrefs (superset) and adopted upstream's
setRxBoostedGain(bool)->bool signature change, which CommonCLI.cpp now uses to
report unsupported. Corrected a stale comment claiming rx_boosted_gain lives at
offset 79 (it is a pad; the field is at 290).
- CommonCLI.cpp: kept the fork's legacy /com_prefs migration and the extracted
writeCommonPrefsImage() call.
- UITask.cpp: three-way merge - upstream's drawTextCentered + powering-off
screen, plus the fork's WITH_WEBCONFIG portal/reboot screens.
- ESP32Board.cpp, MeshCore.h, platformio.ini: kept both sides (fork OTA additions
alongside upstream powerOff/enterDeepSleep and Packet.cpp).
- MicroNMEALocationProvider.h: took upstream's claim/release and added the
_claims member they depend on.
- MyMesh.cpp/.h (repeater + room server): kept the fork's superset defaults.
- Removed duplicate declarations auto-merge produced: RadioLibWrapper::_cad_enabled
and MyMesh::getCADEnabled().
Verification: native suite 15/15 (incl. upstream's new test_mesh_tables), both
MQTT smoke builds green, ArduinoJson pin check passes. Hardware validation next.
An operator who triggers `ota update` via remote management only sees the
command's reply; the actual OTA runs ~2.5s later and reboots on success,
so the start/fail notifications land outside the reply window. Mirror the
key OTA milestones onto the configured alert channel (in addition to the
Serial log):
- START ("OTA update starting") from beginDeferredOtaUpdate(), i.e. while
the loop still runs -- a flood queued at the deferred fire could never
transmit before the flash blocks the loop / reboots on success.
- FAIL ("OTA aborted: ...") at both abort points (teardown barrier
withheld flashing; preflight/download error).
Success has no message: a successful flash reboots into the new image, so
the node returning on the new version is the signal.
New MyMesh::otaAlert() gates on the `alert on/off` master switch and rides
the configured alert scope (AlertReporter::sendText -> sendChannel ->
resolveAlertScope); no-op when alerts are off or no channel is set. Only
these start/fail milestones -- routine slot connect/disconnect is
unaffected (stays in AlertReporter's fault logic). Documented in ALERTS.md.
Both observer firmwares build.
Wire the Phase 4 MQTTLifecycle state machine into MQTTBridge to replace the
blind vTaskDelete teardown that could kill the MQTT task mid-mbedTLS and then
free client buffers on a corrupted heap (the observed OTA teardown panic).
- MQTTBridge owns a MQTTLifecycle::Coordinator driven only by the loop task
(Core 1) from begin()/end(); a nested LifecycleOps binds the host-tested Ops
spec to FreeRTOS/PsychicMqttClient.
- end() requests a cooperative stop; the MQTT task (Core 0) tears down its own
clients where the mbedTLS contexts live, acks via _stop_acked, and
self-terminates. end() waits (bounded) for the ack, then frees queue/buffers.
- Bounded stop timeout -> reviewed fallback (force kill + Core-1 teardown) sets
a dirty latch that withholds OTA flashing.
- begin() gains an idempotent double-call guard and syncs the Coordinator to
Running.
- OTA teardown barrier: simple_repeater's deferred flash aborts/resumes unless
end() reported a clean stop (canFlashAfterStop()).
Scope: minimal cooperative-shutdown unit. The volatile NTP/reconfigure handshake
replacement and the plain-data snapshot / consumer repointing (MQTT_OWNERSHIP.md
sections 1-3) are deferred. MQTT_STOP_TIMEOUT_MS is a Phase-0 placeholder pending
on-hardware characterization.
Native suite green (incl. test_mqtt_lifecycle); both observer firmware smoke
builds compile. Not yet hardware-validated (Phase 7 gate).
Include detailed instructions for local testing of observer and WiFi
functionality without hardware. Document the use of a mock backend and
Wokwi ESP32-S3 simulation for easier development and testing.
Enhance the MQTT implementation documentation to improve developer
experience and facilitate testing workflows.
mikecarper
Kevin Le
ripplebiz
taco
agessaman
Jarosław Domański