Introduced new PlatformIO environments for the LilyGo T-LoRa V2.1-1.6 board, including `LilyGo_TLora_V2_1_1_6_repeater_observer_mqtt` and `LilyGo_TLora_V2_1_1_6_room_server_observer_mqtt`. These environments optimize flash usage by omitting the `sensor_base` and include specific build flags and dependencies for enhanced MQTT capabilities. Updated documentation to reflect changes in partition table handling and NVS settings during firmware updates.
Introduced two new environments in platformio.ini for the Heltec V4 expansion kit: `heltec_v4_expansionkit_repeater_observer_mqtt` and `heltec_v4_expansionkit_room_server_observer_mqtt`. Each environment includes specific build flags, dependencies, and source filters tailored for MQTT functionality, enhancing the project's capabilities for IoT applications.
Match upstream pin map (KCT8103L CSD/CTX, I2C 6/17, LORA_TX_POWER=9) and restore meshcore LoRaFEMControl.cpp and HeltecTrackerV2Board.cpp. Run ESP32 at 240MHz for MQTT/WiFi bridge headroom. Sensor env drops fork-only ENV_PIN overrides to match upstream.
Made-with: Cursor
Upstream adds LoRaFEMControl for a KCT8103L pinout; this variant uses GC1109 (P_LORA_PA_*). Reintroduce the class with the same API and wire HeltecTrackerV2Board through it so FEM logic matches platformio.ini.
Made-with: Cursor
Update the PsychicMqttClient to ensure that QoS0 messages are enqueued with durable outbox storage. This change addresses issues with false-failure semantics in certain connected paths, improving message flow reliability. Additionally, modify platformio.ini to include SSL certificate generation and adjust build flags for reduced verbosity and enhanced functionality.
Refactor the MQTTBridge to implement enhanced QoS handling for publish operations. Introduce retry mechanisms for QoS0 packets, allowing for transient failures to be retried with a delay. Update publish methods to return success status, improving error handling and logging. Additionally, adjust the packet queue processing to accommodate new retry logic and ensure better message delivery control.
Battery (TechoBoard.h/cpp): Added PIN_VBAT_MEAS_EN (P0.31) — the T-Echo
Lite has a gated voltage divider that must be enabled before reading. Also
added pinMode(PIN_VBAT_READ, INPUT) before each ADC read to reclaim P0.02
from other peripherals. Pin definitions hardcoded from LilyGo's
t_echo_lite_config.h.
I2C (variant.h): Corrected SDA/SCL from P0.04/P0.02 to P1.04/P1.02 per
LilyGo's IIC_1_SDA/IIC_1_SCL. The old P0.02 mapping conflicted with the
battery ADC pin.
GPS (variant.h): Corrected all five GPS pin assignments to match LilyGo's
config — UART TX/RX, wake, PPS, and power enable were all scrambled.
SPI (variant.h): Fixed SPI_INTERFACES_COUNT from _PINNUM(0, 2) to (2).
Tested on T-Echo Lite Non-Shell (USB-C, no display). Battery readings match
Heltec V4 reference within 10mV.
T-Echo Lite Non-Shell has no ePaper display, but the existing
companion BLE env inherits DISPLAY_CLASS=GxEPDDisplay from the base
env. This causes display.begin() to run on non-existent hardware,
corrupting BLE initialization and generating a random PIN that
cannot be displayed, making BLE connection impossible.
Add LilyGo_T-Echo-Lite_non_shell_companion_radio_ble env that:
- excludes DISPLAY_CLASS and ePaper-related build flags
- removes GxEPDDisplay.cpp and ui-new from build sources
- uses static BLE_PIN_CODE=123456 (avoids random PIN generation)
Also fix boards/t-echo.json:
- add nrfutil to upload protocols list
- add use_1200bps_touch=true and wait_for_upload_port=true
to enable reliable flashing via PlatformIO upload button