Support fractional seconds, guard active packet work, keep the MCU awake, and restore reception after carrier tests. Include regression coverage and independent-radio RF validation for the V4 and T1000-E.
Keep TCXO warm during owned dual-profile retunes, batch modulation setup, and enable guarded fast RX with buffered 8 MHz SPI on XIAO S3 WIO and Indicator LoRa. Preserve lifecycle invalidation, packet guards, rollback, and existing scheduling budgets.
Add reliable sequence-scoped USB lab transport, native regression coverage, bounded channel and preamble diagnostics, and byte-exact measurement records including failed experiments and qualification limits.
Replace obsolete reader-timeout and message-thread source assertions with
compiled regressions for bookmark saving across battery/USB transitions and
newest-visible message summaries in History, Pending, and Unread modes.
Extend the MQTT sleep harness with dual-radio state and verify both blockers
release when disabled. All 19 post-native verification groups pass on Linux,
including the complete UI and browser runtime suites.
Implement radio2, tempradio2, radioat2 and tempradioat2 across Mesh roles,
with RX-only/RX+TX operation, optional preambles and persistent cross-TX
policy. Keep temporary OTA traffic on its profile by default and maintain
independent retry ownership and backoff for each profile.
Use slow-first receive scanning with 4.8-symbol visits and automatic
preambles rounded up in steps of eight. Preserve pending RX, restore power
saving on exit, and discard work bound to changed or expired profiles.
Restore the infrastructure path.hash.mode setter and report unsupported
extra.sf settings consistently. Add CLI, scheduling, scan and retry tests,
setup documentation, and the V4/XIAO hardware validation results.
Validation: 1,422 native tests, eight KISS tests, 63 final focused profile
tests, 18 checks from the staged source, sanitizer-enabled OTA transfers,
and builds for V4 Mesh roles, Full XIAO Companion and nRF52 T1000-E.
Hardware checks cover reception, cross-TX policy, expiry, reboot and OTA
discovery while receiving main-channel adverts.
One nRF52840 variant shared across both radios, picked per env: Duo runs
the LR1121, Uno the SX1262. Same PCB, only the radio and its DIO1 pin
change.
SuperIO adds the SH1107 OLED, GPS, buzzer and joystick. GPS is driven by
the 3-position mode switch (Mode 2 = on), polled live the way thinknode_m1
does it.
Five quick user-button presses power the unit off; a press wakes it back
on (arms the button as an nRF52 GPIO SENSE source before SYSTEMOFF).
Consolidates #2054 and andyshinn's shared-base/uno work, rebased on dev.
Co-authored-by: lbibass <ewdries02@gmail.com>
Co-authored-by: Andy Shinn <andys@andyshinn.as>
Use RX-only radio recovery and feed the repeater reboot watchdog after MeshCore parsing. Default to 24 hours, apply temporary watchdog and advert intervals in RAM, and report temporary durations as days, hours, and minutes. Add regression coverage and an ESP-NOW bridge setup guide.
Integrate ExpressLRS TX module support and its stacked ESP32 heap changes.
Use the approved Linkflow calibration (17-30 dBm), preserve the PA drive
and output path after radio recovery, and keep LoRa OTA enabled.
Preserve stored ACLs and filters on allocation failure, release owned
client/filter buffers, service heap OTA contexts on Companions, release
self-serving workspaces after TempRadio, and reset staged-resume state
when a context is released. Keep manual staging and active operations
alive. Account for all moved allocations in the runtime RAM gate.
Validation: 1,393 native cases; radio-power, heap-context, ACL persistence,
shared-queue transfer, display/inbox, radio receive, and memory regressions.
Firmware builds passed for Linkflow, Heltec V2 Companion, T-Beam MQTT
repeater, Heltec V4 R8 MQTT repeater, RAK4631 repeater, and Indicator Full.
Physical verification awaits access to the currently offline lab Pi.
Default to retained history with a separate pending count, and add persistent display.inbox CLI modes for history, pending, and unread. Preserve browsing while clients are connected and show the active USB or Bluetooth connection.
Fixes#5
Persist separate display modes and timeouts in seconds for battery and USB power, expose four controls in WebConfig and CLI, and apply one shared policy across display-equipped roles.
Detect R8 external power from a USB host or calibrated battery voltage above 4.21 V, with cached sampling and hysteresis. Add policy, persistence, browser, and R8 power-detection regression coverage.
Accept the upstream empty-prefix neighbor.remove command after whitespace normalization while preserving invalid-key checks. Cover repeater and room-server removal paths with regression tests.
Fixes#8
mikecarper
Huw Duddy
Scott Powell
Kevin Le
TadyTheFish
agessaman