The ntc_temp2 lookup table was declared as 'char', which can be
unsigned on some platforms, causing negative temperature values
(-30°C to -1°C) to be incorrectly interpreted.
Changed to int8_t to ensure proper signed integer handling of
negative temperatures.
Fixes#1389
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
- Updated the begin() method to handle deep sleep and cold boot scenarios for GC1109 FEM pins.
- Improved pin configuration logic for power management and transmission control.
- Enhanced comments for clarity on pin roles and behavior during sleep and wake cycles.
- Adjusted platformio.ini files to reflect updated pin definitions and usage notes.
- Introduced commands to get and set the owner public key and email address.
- Specified that these commands are available via the serial console only.
- Added example usage for owner configuration in the documentation.
* ANON_REQ_TYPE_OWNER, firmware-ver removed (security exploit)
* ANON_REQ_TYPE_BASIC, formware-ver removed, just remote clock + some 'feature' bits
* CTL_TYPE_NODE_DISCOVER_REQ now ingored if 'repeat off' has been set
- Updated the advert timer calculation to explicitly cast the advert interval to an integer type, ensuring consistent behavior across different mesh implementations.
- Enhanced the savePrefs function in CommonCLI to trigger advert timer updates when the advert interval changes, improving responsiveness to user configuration changes.
- Removed the aggressive 4-hour health check in MQTTBridge to prevent connection instability, allowing the MQTT client library to manage connection health internally.
As all NRF52 boards now have OTA support, let's remove the subclass
and integrate it into the base class.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The Ikoka boards are based on the Xioa NRF52840 module which is known
to have the LC circuit for the internal DC/DC regulator to be
available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
The schematic shows the LC circuit for the internal DC/DC regulator
to be available. Enable it to save power.
Signed-off-by: Frieder Schrempf <frieder@fris.de>
Fix of a typo, change second sentence to start with a capital (like Q 3.6), adding missing dot in 3.8, and turn 3.8 into a question.
The file on dev branch is outdated, so submitting this on main.
Liam Cottle
Rastislav Vysoky
ripplebiz
taco
Dustin Brewer
Socalix
Alexander aka R6DJOandClaude Sonnet 4.5
agessaman
chrisdavis2110
liquidraver
Scott Powell
Frieder Schrempf
Michael Boelen
Ferdia McKeogh
Oliver Weyhmüller