Commit Graph
3 Commits
Author SHA1 Message Date
mikecarper 1a074116e8 Merge PR #7 with reviewed ExpressLRS power and memory fixes
Integrate ExpressLRS TX module support and its stacked ESP32 heap changes.
Use the approved Linkflow calibration (17-30 dBm), preserve the PA drive
and output path after radio recovery, and keep LoRa OTA enabled.

Preserve stored ACLs and filters on allocation failure, release owned
client/filter buffers, service heap OTA contexts on Companions, release
self-serving workspaces after TempRadio, and reset staged-resume state
when a context is released. Keep manual staging and active operations
alive. Account for all moved allocations in the runtime RAM gate.

Validation: 1,393 native cases; radio-power, heap-context, ACL persistence,
shared-queue transfer, display/inbox, radio receive, and memory regressions.
Firmware builds passed for Linkflow, Heltec V2 Companion, T-Beam MQTT
repeater, Heltec V4 R8 MQTT repeater, RAK4631 repeater, and Indicator Full.
Physical verification awaits access to the currently offline lab Pi.
2026-09-10 22:06:16 -07:00
MUSTARDTIGERFPV 3f6cbf636d Restore the full repeater feature set on the LINKFLOW 900
The variant carried a "classic ESP32 DRAM strip": MAX_CLIENTS cut from 32 to
2, the flood rule engine and group moderation compiled out, and the filter,
scope and moderation tables cut to a single slot each. All of it existed to
squeeze fixed .bss tables into classic ESP32's ~124 KiB static DRAM window.

Those tables now live on the heap, so the strip buys nothing. Removing it also
clears a real trap: with two client slots, once both held a protected manager
(admin, region manager or filter manager) putClient() could no longer allocate,
and every further admin login was refused with no reply to the operator.

Static DRAM with the full feature set restored:
  70,764 / 124,580 occupied, 53,816 free (8,192 required)
2026-09-09 01:36:09 -07:00
MUSTARDTIGERFPV a413a361dd Add GEPRC LINKFLOW 900M TX variant
An ExpressLRS 900 MHz transmitter module: ESP32-D0WDQ6, 4 MB flash, SX1276
driving an external PA through a DAC gain input on GPIO26.

Pin values come from the ExpressLRS hardware layout for this target
(Unified_ESP32_900_TX). The board brings out only RX_EN, so RadioLib's
single-pin RF switch handling covers it. Note GPIO12 is both RX_EN and the
MTDI flash-voltage strapping pin, so it must stay low through reset.

Verified on hardware: boots, radio initialises, TX power changes take
effect and are rejected outside the configured range, and the node repeats
flood traffic.

Uses dual_ota_1536k.csv, and 115200 for upload because the CH340 on this
board corrupts transfers above 230400.
2026-09-09 01:24:38 -07:00