Commit Graph
73 Commits
Author SHA1 Message Date
mikecarper eaf19c3638 Port consent-gated one-key DM queue to keymindCascade 2026-09-28 12:09:05 -07:00
mikecarper 49d4cc3f3e Expose Companion flood retry controls and clarify T096 fixed TX PA 2026-09-26 10:31:54 -07:00
mikecarper c31a0e5ed5 Merge upstream dev into keymindCascade 2026-09-24 00:51:07 -07:00
Blake Latchford 0c3fe356d0 Constrain agc.reset.interval and allow intervals > 255s 2026-09-21 12:26:36 -04:00
mikecarper 4139e7e24d Merge meshcore-dev dev with companion and board integrations 2026-09-15 20:51:43 -07:00
Liam Cottle 1751783931 Merge pull request #3357 from skandragon/feat/picow-wifi-ble
Add WiFi to RPI PicoW (and perhaps others)
2026-09-09 21:55:22 +12:00
liamcottle cee43752c7 add new ENABLE_WIFI_INTERFACE build flag for companions without providing ssid and pwd 2026-09-08 22:54:50 +12:00
liamcottle 6809fed159 simplify and remove 2 as a wifi enabled state 2026-09-08 21:30:17 +12:00
mikecarper d28535f503 Add independent Companion Bluetooth stealth flag
Keep stealth separate from custom, saved-random and rotating MAC policies without migrating the development MAC mode. Persist authenticated peer state, guard advertising transitions and recovery, and expose the setting through the CLI and WebConfig.

Add regression and CI checks and record exact XIAO BLE pairing, reconnect, reboot and address-rotation hardware results.
2026-09-07 23:46:55 -07:00
mikecarper 8d72c3e3da Add configurable Companion Bluetooth addresses 2026-09-07 18:29:00 -07:00
Michael Graff 7c2b4d88be WiFi on/off tri-state: on when SSID set unless explicitly disabled; PicoW ships no default SSID 2026-09-06 22:18:00 -05:00
Michael Graff dac171b49c Default wifi.enabled to 0 2026-09-06 22:05:29 -05:00
Michael Graff eb2ab10de0 Add wifi.enabled pref and CLI; skip WiFi when disabled or SSID blank 2026-09-06 21:56:25 -05:00
ripplebiz 89ef200efa Merge pull request #3366 from recrof/companion-cli-fix-2
Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh
2026-09-07 10:42:48 +10:00
Rastislav Vysoky 5d82ed352c Companion CLI: fixed txdelay, direct.txdelay, agc.reset.interval, int.thresh 2026-09-06 15:14:35 +02:00
Michael Graff 739a67c9f1 Allow WiFi credentials to be set at runtime
Store ssid/pwd in NodePrefs and set them with 'set wifi.ssid' /
'set wifi.pwd' over USB serial; build-time WIFI_SSID/WIFI_PWD stay as
the fallback. Headless WiFi builds get the config CLI on Serial, which
is otherwise unused there.
2026-09-05 23:15:13 -05:00
Aleksei Mamlin 1d9a62ca4a companion: get/set timezone offset for clock
* Add tz_offset companion prefs and get/set commands for companion cli
* Use tz_offset for clock on display

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
2026-08-31 09:08:22 +03:00
mikecarper c24bc82814 Merge upstream dev companion CLI updates 2026-08-28 17:31:28 -07:00
mikecarper 7676e4b1c2 feat: unify companion builds and USB runtime modes 2026-08-27 15:06:26 -07:00
mikecarper e5fd77e53f feat: add Bluetooth-controlled LoRa OTA
Add the framed BLE mOTA transport and companion control path, complete the full-profile build and runtime fixes, and document and test the OTA workflow.
2026-08-27 01:22:18 -07:00
liamcottle e3d0f9fcaa fix cad cli command on companion 2026-08-27 19:05:18 +12:00
mikecarper 65e40ff05f feat: add customizable companion Bluetooth names 2026-08-25 20:51:18 -07:00
Scott Powell 6dad3d5ab4 * companion: fix for setSpreadFactor(). "set cad ..." and "board" now implemented. 2026-08-24 20:44:17 +10:00
Scott Powell 845242f4aa * prefs, custom dirty state 2026-08-24 17:22:15 +10:00
Scott Powell 5a162ff4c6 * new DynamicConfigSerializer
* board/variant KeyValueStore now can write to 'custom' object in Json prefs
2026-08-24 17:12:56 +10:00
mikecarper f2d4ffbb7e Unify full firmware profiles and add dual USB logging 2026-08-23 19:22:45 -07:00
Scott Powell 47b0b7b3b8 * T096, and Station G3: refactoring the 'FEM' prefs to variant-specific code
* CommonCLI: 'FEM' commands removed
* introduced static no-op attachDynamicPrefs() for all boards
2026-08-24 01:50:22 +10:00
Scott Powell b4f7e941fa * CommonRadioPrefs refactors done 2026-08-23 17:30:30 +10:00
Scott Powell 41588d8052 * adding new CommonRadioPrefs
* refactor: moving various radio CLI handling to CommonRadioPrefs
2026-08-23 14:45:15 +10:00
mikecarper 47993d178e Update MeshCore features and OTA layout handling 2026-08-18 23:17:42 -07:00
mikecarper ba14fa1c32 Enable Companion power saving by default 2026-08-16 21:06:23 -07:00
mikecarper bd2e668961 Add T-Beam WiFi button toggle 2026-08-15 18:12:09 -07:00
mikecarper 843d309e2b Fix Companion device power saving 2026-08-15 17:58:37 -07:00
mikecarper b8d274c90e Expose RX power saving in WebConfig 2026-08-15 09:07:41 -07:00
mikecarper a04a284a3f Merge remote-tracking branch 'review/observer-firmware' into keymindCascade
# Conflicts:
#	.github/workflows/build-observer-firmwares.yml
#	.gitignore
#	MQTT_IMPLEMENTATION.md
#	MQTT_INTERNALS.md
#	README.md
#	STABILITY_TESTABILITY_HANDOFF.md
#	docs/cli_commands.md
#	examples/companion_radio/MyMesh.cpp
#	examples/simple_repeater/MyMesh.cpp
#	examples/simple_repeater/UITask.cpp
#	examples/simple_room_server/MyMesh.cpp
#	examples/simple_room_server/UITask.cpp
#	examples/simple_sensor/SensorMesh.cpp
#	platformio.ini
#	scripts/generate_webconfig_html.py
#	scripts/webconfig_mock_server.py
#	src/helpers/CommonCLI.cpp
#	src/helpers/CommonCLI.h
#	src/helpers/JWTHelper.cpp
#	src/helpers/MQTTDefaults.h
#	src/helpers/MQTTMessageBuilder.cpp
#	src/helpers/MQTTPayloadBuilder.h
#	src/helpers/MQTTPresets.h
#	src/helpers/bridges/MQTTBridge.h
#	src/helpers/esp32/WebConfigServer.cpp
#	src/helpers/esp32/WebConfigServer.h
#	src/helpers/ui/SH1106Display.cpp
#	variants/lilygo_tbeam_SX1262/platformio.ini
#	variants/lilygo_tbeam_SX1276/platformio.ini
#	variants/lilygo_tlora_v2_1/platformio.ini
#	variants/thinknode_m7/platformio.ini
#	webui/index.html
2026-08-14 08:53:02 -07:00
Scott Powell 890a2e2cff * commenting out the load/save of the fem_ properties, until they can be set 2026-08-14 16:30:12 +10:00
mikecarper 3cd9c84893 Fix Companion NodePrefs ODR conflict 2026-08-12 15:42:50 -07:00
ripplebiz a4ab7f0e59 Merge pull request #3137 from agessaman/feat/station-g3-fem-prefs
Station G3: Expose, persist, and apply FEM gain preferences
2026-08-12 16:11:23 +10:00
mikecarper ea3843e0b4 Merge branch 'PowerSaving-v17' of https://github.com/IoTThinks/MeshCore into keymindCascade
# Conflicts:
#	examples/companion_radio/MyMesh.cpp
#	examples/companion_radio/NodePrefs.h
#	examples/simple_repeater/MyMesh.cpp
#	examples/simple_room_server/MyMesh.cpp
#	examples/simple_sensor/SensorMesh.cpp
#	platformio.ini
#	src/MeshCore.h
#	src/helpers/CommonCLI.cpp
#	src/helpers/CommonCLI.h
#	src/helpers/radiolib/CustomSX1262Wrapper.h
#	src/helpers/radiolib/CustomSX1268Wrapper.h
#	src/helpers/radiolib/LR11x0Reset.h
#	src/helpers/radiolib/SX126xReset.h
2026-08-11 13:28:43 -07:00
Kevin Le 7509e51e3d Station G3: Expose, persist, and apply FEM gain preferences. https://github.com/meshcore-dev/MeshCore/pull/3137 2026-08-12 00:07:37 +07:00
agessaman e2aa7b98f9 feat(companion_radio): add external FEM gain preferences for RX and TX for companions
Introduced consistent preferences for external LoRa FEM RX and TX gain settings in NodePrefs. Updated companion MyMesh to apply these settings during initialization and transmission. Added unit tests to verify the round-trip serialization of these new preferences.
2026-08-10 11:59:26 -07:00
mikecarper 6fafcc67a7 Merge remote-tracking branch 'upstream/dev' into keymindCascade
# Conflicts:
#	examples/companion_radio/NodePrefs.h
2026-08-07 22:53:50 -07:00
Hacuchino-hash 3abe415cf7 Add RGB LED and haptic notifications for SenseCAP MeshTracker X1 2026-08-06 07:27:05 -05:00
mikecarper 61cb8d6e96 Merge upstream dev into keymindCascade
# Conflicts:
#	docs/payloads.md
#	examples/companion_radio/DataStore.cpp
#	examples/companion_radio/DataStore.h
#	examples/companion_radio/MyMesh.cpp
#	examples/companion_radio/MyMesh.h
#	examples/companion_radio/NodePrefs.h
#	examples/companion_radio/main.cpp
#	examples/simple_room_server/MyMesh.cpp
#	examples/simple_room_server/MyMesh.h
#	examples/simple_sensor/SensorMesh.cpp
#	platformio.ini
#	src/Utils.cpp
#	src/helpers/CommonCLI.cpp
#	src/helpers/CommonCLI.h
#	src/helpers/NRF52Board.cpp
#	src/helpers/nrf52/SerialEthernetInterface.cpp
#	src/helpers/radiolib/CustomLLCC68.h
#	src/helpers/radiolib/CustomLLCC68Wrapper.h
#	src/helpers/radiolib/CustomLR1110.h
#	src/helpers/radiolib/CustomSTM32WLxWrapper.h
#	src/helpers/radiolib/CustomSX1262.h
#	src/helpers/radiolib/CustomSX1268.h
#	src/helpers/radiolib/CustomSX1268Wrapper.h
#	src/helpers/ui/ST7735Display.cpp
#	test/mocks/Stream.h
#	variants/minewsemi_me25ls01/target.h
#	variants/wio-tracker-l1/platformio.ini
2026-08-03 14:53:59 -07:00
mikecarper 86905733ff Add configurable FEM RX gain and recalibration 2026-07-20 15:57:46 -07:00
Scott Powell a0b52be4ad * RP2040 build fixes
* new prefs file now "/prefs.json"
2026-07-18 20:12:21 +10:00
Scott Powell 2189f2294c * added prefs initialisers to match original zeroed state 2026-07-18 19:22:53 +10:00
Scott Powell f515716032 * new NodePrefs for companion 2026-07-17 16:05:10 +10:00
Kevin Le e608503aa0 Merged latest changes from "Add CLI control to LoRa's fem LNA" https://github.com/meshcore-dev/MeshCore/pull/2140 2026-04-27 12:15:46 +07:00
Kevin Le c5d8ada27d Added features from PowerSaving 14.1.1 2026-04-24 23:02:11 +07:00