Let the mesh timed OTA retry guard own byte-identical requests instead of the permanent bridge FIFO. Bind bridge ingress to its primary profile generation and preserve UART reflection/liveness protections. Verified a LoRa to ESP-NOW to LoRa update with outage recovery and install.
Integrate upstream 1.18.0, delayed direct ACK forwarding, zero-scope routing, Waveshare LR1121 and dynamic WiFi variants. Preserve fork chemistry-aware power management and bounded multi-interface UI; retain retry/dedup safety while adding upstream ACK delay. Qualify LR1121 band power and HP-only Morse handling with native regressions.
Add checked protocol adapters for every project LoRa family and enable Indicator LoRa TX. Preserve normal modem restoration, LR1110 fast hops, LR2021 side detectors and physical-band power limits.
Fix SX1276 beacon CAD completion dispatch, concrete-chip validation on multi-chip variants, no-GPS sensor hook linkage and STM32 file construction. Add fault, negative-control and preset coverage to CI. Keep flash-constrained STM32 artifacts disabled after measured opt-in overflows.
Preserve observer discovery when forwarding is disabled while honoring hidden-node settings. Keep GPS power ownership paired and incorporate upstream GPS diagnostics.
Use a 960-byte constant-time Ed25519 base table, compact hash/scalar code and unused-library trims while retaining Reader, BLE P-256 and the 8 KiB stack. RAK4631 Full saves 57,496 flash bytes and 3,152 static RAM bytes versus preview3.
Support complete chapters and verse ranges with bounded app continuation replies and cooperative terminal output. Use nonblocking TCP writes under reader backpressure. Add scalar/signature comparisons and a linked ARM crypto/stack CI gate.
Validated clean RAK4631, T1000-E, T096 and V4 Full builds, host regressions, and physical RAK chapter/reconnect and signing comparisons. Physical signing averages 35.9 ms versus 14.4 ms with the original table.
Port Meshtext settings to verified atomic nRF52 storage and use the existing radio RNG and hardware entropy. Keep the ExtraFS boundary, GPS, contacts, channel count and 8 KiB stack unchanged; omit unused library data to fit the image. Require linked codec and Companion transport evidence and build the real RAK Full profile in CI. Add configuration and storage-failure regression coverage.
Share one bounded WiFi outage and recovery schedule across MQTT, automatic NTP, Companion station ownership and WebConfig. Preserve enabled settings and foreground access while allowing normal sleep after confirmed physical shutdown.
Honor failed SDK client stops before handing off WiFi, protect clean teardown and reconfiguration, and retry transient ESP-NOW channel restoration without repeated disconnects. Add production-method, SDK failure and real sleep regressions to CI.
Validation: native MQTT/NTP/clock/reconnect suites; production power and wrapper failure tests; browser, room HTTP, OTA and combined bridge regressions; Full Heltec V4 repeater, room and companion builds with capability, flash and linked-memory checks.
- Clip requested power to the active PA's range instead of failing. A
stored 22 dBm was rejected at 2.4 GHz (HF PA max 13 dBm), and since
setTxPower ignores errors the sub-GHz PA stayed configured.
- Re-apply the requested power after every successful retune: PA choice
depends on the band, and set radio / tempradio only call setParams.
ESP32-S3FH4R2 (4MB flash, 2MB PSRAM, native USB-CDC) with an LR1121.
Pins, the DIO5/DIO6 RF switch table and the 1.8 V TCXO follow the HF
schematic and Waveshare's examples. Envs: repeater, room server,
companion USB/BLE and KISS modem, all on min_spiffs so roles share one
partition layout.
Only RFO_HP_LF is wired (R4 on RFO_LP_LF is not fitted), so the new
opt-in LR1121_FORCE_HP_PA flag keeps RadioLib on the HP PA at <= 14 dBm,
where it would otherwise select the unconnected LP PA.
mikecarper
agessaman
ripplebiz